Hygrothermomechanical behavior of composites under nonsymmetric environmental effects

A. N. Aniskevich, Yu. O. Yanson, and N. I. Aniskevich, “Creep of epoxy binder in a humid atmosphere,” Mech. Compos. Mater.,28, No. 1, 12–18 (1992). R. D. Maksimov, E. A. Sokolov, and V. P. Mochalov, “Effect of temperature and humidity of polymer materials. 2. Uniaxial elongation under variable temperature humidity conditions,” Polym. Mech.,11, No. 6, 834–839 (1975). A. M. Skudra and R. D. Bertulis, “Effect of moisture and temperature on the elastic characteristics of reinforced plastics,” Mech. Compos. Mater.,29, No. 1, 81–84 (1993). R. L. Geimer, “Dimensional stability of flakeboards as affected by board specific gravity and flake alignment,” Forest. Prod. J.,32, No. 8, 44–52 (1982). B. R. Vital, J. B. Wilson, and P. H. Kanarek, “Parameters affecting dimensional stability of flakeboard and particleboard,” Forest Prod. J.,30, No. 12, 23–29 (1980). K. A. Rocens, “Macrostructure theory of modification of wood properties,” J. Appl. Polym. Sci., Appl. Polym. Symp.,37, 923–941 (1983). K. A. Rocens, Technological Regulation of the Properties of Wood [in Russian], Riga (1979). K. A. Rotsens and K. N. Shteiners, “Evaluation of the pliability and rigidity of nonbalanced monoclinic composites,” Mech. Compos. Mater.,12, No. 6, 900–904 (1976). J. A. Brauns and K. A. Rocens, “Hygromechanics of composites with unsymmetric structure,” Mech. Compos. Mater.,30, No. 6, 601–607 (1994). R. B. Pipes, J. R. Vinson, and T.-W. Chou, “On the hygrothermal response of laminated composite systems,” J. Compos. Mater.,10, No. 2, 129–148 (1976). J. A. Brauns and K. A. Rocens, “Nonlinear moisture deformation of a composite with a densified reinforcement,” Mech. Compos. Mater.,30, No. 3, 222–226 (1994). G. S. Springer (ed.), Environmental Effects on Composite Materials, Technomic, Westport (1981). J. R. Vinson (ed.), Advanced Composite Materials — Environmental Effects, ASTM STP 658 (1978). B. N. Ugolev, Deformation of Wood and Stresses in Drying [in Russian], Moscow (1971). S. W. Tsai and H. T. Hahn, Introduction to Composite Materials, Technomic, Westport (1980). A. K. Malmeisters, V. P. Tamuzs, and G. A. Teters, Strength of Polymer and Composite Materials [in Russian], Riga (1980). J. A. Brauns and K. A. Rocens, “Analysis of the effect of stress of structural elements on the viscoelastic properties of composite,” Mech. Compos. Mater.,29, No. 1, 20–26 (1993). J. Crank, The Mathematics of Diffusion, Oxford (1956). W. Jost, Diffusion in Solids, Liquids, Gases, New York (1960). W. T. Koiter, “Couple-stress in the theory of elasticity,” Proc. Koninkl. Ned. Akad. von Wetenschappen, BI,67, No. 1, 17–44 (1964). R. D. Mindlin, “Micro-structure in linear elasticity,” Arch. Rat. Mech. Anal., No. 1, 51–78 (1964). J. C. Halpin, K. Jerine, and J. M. Whitney, “The laminate analogy for 2 and 3 dimensional composite materials,” J. Comp. Mater., No. 5, 36–49 (1971). A. V. Berzon and A. K. Rocens, “Variation of structure and Young's moduli of wood upon its compaction,” Lesnoi Zh., No. 6, 101–106 (1976). J. A. Brauns and K. A. Rocens, “Applied model of composite with incomplete bonding and finite length of reinforcing elements,” Mech. Compos. Mater.,27, No. 5, 567–573 (1991). G. S. Werdynz and K. A. Rocens, “Humidity effect on the susceptibility to deformations and on the swelling pressure of ammonia-modified wood,” in: Research Advances in Agricultural Sciences [in Polish], Poznan (1987), pp. 267–268. B. I. Ogarkov and A. V. Apostol, Theory and Physical Basis of Pressing Wood [in Russian], Voronezh (1981).