Hydroxyapatite coating for titanium fibre mesh scaffold enhances osteoblast activity and bone tissue formation

Makoto Hirota1, Tohru Hayakawa2, Masao Yoshinari3, Akihiro Ametani4, Takaki Shima4, Yuka Monden1, Tomomichi Ozawa1, Mitsunobu Sato5, Chika Koyama1, Naoto Tamai1, Toshinori Iwai1, Iwai Tohnai1
1Department of Oral and Maxillofacial Surgery, Yokohama City University Graduate School of Medicine, 3-9 Fuku-ura, Kanazawa-ku, Yokohama 236-0004, Japan
2Department of Dental Engineering, Tsurumi University School of Dentistry, 2-1-3 Tsurumi, Tsurumi-ku, Yokohama 230-8501, Japan
3Division of Oral Implants Research, Oral Health Science Center, Tokyo Dental College, 1-2-2 Masago, Mihama-ku, Chiba 261-8502, Japan
4Medical Device Department, HI-LEX Corporation, Inc., 1-12-28 Sakae-cho, Takarazuka 665-0845, Japan
5Coordination Engineering Laboratory, Faculty of Engineering, Kogakuin University, 2665-1, Nakano, Hachioji, Tokyo 192-0015, Japan

Tài liệu tham khảo

Jansen, 1992, Soft tissue response to different types of sintered metal fiber-web materials, Biomaterials, 13, 959, 10.1016/0142-9612(92)90121-4 Kroese-Deutman, 2008, Orthotopic bone formation in titanium fiber mesh loaded with platelet-rich plasma and placed in segmental defects, Int J Oral Maxillofac Surg, 37, 542, 10.1016/j.ijom.2008.01.009 Vehof, 2000, Bone formation in calcium–phosphate-coated titanium mesh, Biomaterials, 21, 2003, 10.1016/S0142-9612(00)00094-6 van den Dolder, 2007, The response of osteoblast-like cells towards collagen type I coating immobilized by p-nitrophenylchloroformate to titanium, J Biomed Mater Res A, 83, 712, 10.1002/jbm.a.31428 Meretoja, 2005, Osteoblast differentiation with titania and titania–silica-coated titanium fiber meshes, Tissue Eng, 11, 1489, 10.1089/ten.2005.11.1489 Meretoja, 2007, Titania and titania–silica coatings for titanium: comparison of ectopic bone formation within cell-seeded scaffolds, Tissue Eng, 13, 855, 10.1089/ten.2006.0234 Hacking, 2007, A physical vapor deposition method for controlled evaluation of biological response to biomaterial chemistry and topography, J Biomed Mater Res, 82, 179, 10.1002/jbm.a.31131 Takemoto, 2005, Mechanical properties and osteoconductivity of porous bioactive titanium, Biomaterials, 26, 6014, 10.1016/j.biomaterials.2005.03.019 Hayakawa, 2008, Effect of thin carbonate-containing apatite (CA) coating of titanium fiber mesh on trabecular bone response, J Mater Sci Mater Med, 19, 2087, 10.1007/s10856-007-3293-1 Hayakawa, 2006, Trabecular bone response to titanium implants with a thin carbonate-containing apatite coating applied using the molecular precursor method, Int J Oral Maxillofac Implants, 21, 851 Hirota, 2010, Molecular precursor method facilitates thin hydroxyapatite coating of titanium fiber web scaffold and enhances bone formation: experimental study in rat cranial bone defects, Int J Oral Maxillofac Implants, 25, 888 Hayakawa, 2009, Thin cabonate-containing apatite coating of titanium web using molecular precursor method under oxygen gas introduction, J Oral Tissue Eng, 6, 201 van den Dolder, 2003, Bone tissue reconstruction using titanium fiber mesh combined with rat bone marrow stromal cells, Biomaterials, 24, 1745, 10.1016/S0142-9612(02)00537-9 van der Lubbe, 1988, A simple method for preparing thin (10mM) histological sections of undecalcified plastic embedded bone with implants, Stain Technol, 63, 171, 10.3109/10520298809107179 Lavos-Valereto, 2001, In vitro and in vivo biocompatibility testing of Ti–6AI–7Nb alloy with and without plasma-sprayed hydroxyapatite coating, J Biomed Mater Res, 58, 727, 10.1002/jbm.1072 Narasaraju, 1996, Review of some physico-chemical aspects of hydroxyapatite, J Mater Sci, 31, 1, 10.1007/BF00355120 Yang, 2003, Influence of post-deposition heating time and the presence of water vapor on sputter-coated calcium phosphate crystallinity, J Dent Res, 82, 833, 10.1177/154405910308201014 Yang, 2003, Effect of post-deposition heating temperature and the presence of water vapor during heat treatment on crystallinity of calcium phosphate coatings, Biomaterials, 24, 5131, 10.1016/S0142-9612(03)00459-9 Takahashi, 2008, Characterization and in vitro evaluation of biphasic calcium pyrophosphate-tri calcium phosphate radio frequency magnetron sputter coatings, J Biomed Mater Res A, 84, 682, 10.1002/jbm.a.31341 Hulshoff, 1998, Interfacial phenomena: an in vitro study of the effect of calcium phosphate (Ca–P) ceramic on bone formation, J Biomed Mater Res, 40, 464, 10.1002/(SICI)1097-4636(19980605)40:3<464::AID-JBM18>3.0.CO;2-J Perizzolo, 2001, Interaction between topography and coating in the formation of bone nodules in culture for hydroxyapatite- and titanium-coated micromachined surfaces, J Biomed Mater Res, 56, 494, 10.1002/1097-4636(20010915)56:4<494::AID-JBM1121>3.0.CO;2-X Siebers, 2006, The influence of the crystallinity of electrostatic spray deposition-derived coatings on osteoblast-like cell behavior, in vitro, J Biomed Mater Res A, 78, 258, 10.1002/jbm.a.30700 Mayr-Wohlfart, 2001, Proliferation and differentiation rates of a human osteoblast-like cell line (SaOS-2) in contact with different bone substitute materials, J Biomed Mater Res, 57, 132, 10.1002/1097-4636(200110)57:1<132::AID-JBM1152>3.0.CO;2-K Shi, 2007, Effects of continuous activation of vitamin D and Wnt response pathways on osteoblastic proliferation and differentiation, Bone, 41, 87, 10.1016/j.bone.2007.04.174 Bigi, 2007, In vitro culture of mesenchymal cells onto nanocrystalline hydroxyapatite-coated Ti13Nb13Zr alloy, J Biomed Mater Res A, 82, 213, 10.1002/jbm.a.31132