Hydrophilic and antibacterial properties of polyvinyl alcohol/4-vinylpyridine graft polymer modified polypropylene non-woven fabric membranes

Huang, 2008, Diverse and distinct bacterial communities induced biofilm fouling in membrane bioreactors operated under different conditions, Environ. Sci. Technol., 42, 8360, 10.1021/es801283q Jeison, 2006, Cake layer formation in anaerobic submerged membrane bioreactors (AnSMBR) for wastewater treatment, J. Membr. Sci., 284, 227, 10.1016/j.memsci.2006.07.035 Lee, 2009, Correlation between local TMP distribution and bio-cake porosity on the membrane in a submerged MBR, J. Membr. Sci., 332, 50, 10.1016/j.memsci.2009.01.036 Hwang, 2008, Correlating TMP increases with microbial characteristics in the bio-cake on the membrane surface in a membrane bioreactor, Environ. Sci. Technol., 42, 3963, 10.1021/es7029784 Drews, 2007, Impact of ambient conditions on SMP elimination and rejection in MBRs, Water Res., 41, 3850, 10.1016/j.watres.2007.05.046 Korikov, 2006, Interfacially polymerized hydrophilic microporous thin film composite membranes on porous polypropylene hollow fibers and flat films, J. Membr. Sci., 279, 588, 10.1016/j.memsci.2005.12.051 Li, 2007, Polyamide thin film composite membranes prepared from 3,4′,5-biphenyl triacyl chloride, 3,3′,5,5′-biphenyl tetraacyl chloride and m-phenylenediamine, J. Membr. Sci., 289, 258, 10.1016/j.memsci.2006.12.007 Piletsky, 2000, Surface functionalization of porous polypropylene membranes with molecularly imprinted polymers by photograft copolymerization in water, Macromolecules, 33, 3092, 10.1021/ma991087f Susanto, 2007, Photografted thin polymer hydrogel layers on PES ultrafiltration membranes: characterization, stability, and influence on separation performance, Langmuir, 23, 7818, 10.1021/la700579x Ulbricht, 2005, Porous polypropylene membranes with different carboxyl polymer brush layers for reversible protein binding via surface-initiated graft copolymerization, Chem. Mater., 17, 2622, 10.1021/cm0485714 Gholap, 2005, Molecular origins of wettability of hydrophobic poly(vinylidene fluoride) microporous membranes on poly(vinyl alcohol) adsorption: surface and interface analysis by XPS, J. Phys. Chem. B, 109, 13941, 10.1021/jp050806r Zhang, 2008, Preparation and characterization of hydrophilic modification of polypropylene non-woven fabric by dip-coating PVA (polyvinyl alcohol), Sep. Purif. Technol., 61, 276, 10.1016/j.seppur.2007.10.019 Yang, 2003, Wettability and antibacterial assessment of chitosan containing radiation-induced graft nonwoven fabric of polypropylene-g-acrylic acid, J. Appl. Polym. Sci., 90, 1331, 10.1002/app.12787 Yoon, 2006, High flux ultrafiltration membranes based on electrospun nanofibrous PAN scaffolds and chitosan coating, Polymer, 47, 2434, 10.1016/j.polymer.2006.01.042 Zhang, 2005, Electrospun non-woven membrane of poly(ethylene covinyl alcohol) end-capped with potassium sulfonate, Mater. Chem. Phys., 91, 217, 10.1016/j.matchemphys.2004.11.020 Seo, 2002, Non-woven fabric filter separation activated sludge reactor for domestic wastewater reclamation, Water Sci. Technol., 47, 133, 10.2166/wst.2003.0035 Chang, 2006, Performance and filtration characteristics of non-woven membranes used in a submerged membrane bioreactor for synthetic wastewater treatment, Desalination, 191, 8, 10.1016/j.desal.2005.06.032 Meng, 2005, Do nonwovens offer a cheaper option for MBR?, Filtra. Sep., 42, 28, 10.1016/S0015-1882(05)70558-9 Gao, 2007, Preparation and antibacterial character of a water-insoluble antibacterial material of grafting polyvinylpyridinium on silica gel, Mater. Lett., 61, 877, 10.1016/j.matlet.2006.06.034 Yao, 2008, Surface modification and antibacterial activity of electrospun polyurethane fibrous membranes with quaternary ammonium moieties, J. Membr. Sci., 320, 259, 10.1016/j.memsci.2008.04.012 Hu, 2005, Antibacterial and antifungal efficacy of surface functionalized polymeric beads in repeated applications, Biotechnol. Bioeng., 89, 474, 10.1002/bit.20384 Kozlov, 2003, Adsorption of poly(vinyl alcohol) onto hydrophobic substrates: a general approach for hydrophilizing and chemically activating surfaces, Macromolecules, 36, 6054, 10.1021/ma021681g Serizawa, 1999, Stepwise assembly of ultrathin poly (vinyl alcohol) films on a gold substrate by repetitive adsorption/drying processes, Langmuir, 15, 5363, 10.1021/la9816050 Coupe, 2001, A new approach to surface functionalization of fluoropolymers, Macromolecules, 34, 10.1021/ma001685q Nash, 1997, Modification of polystyrenic matrices for the purification of proteins. Effect of the adsorption of poly(vinyl alcohol) on the characteristics of poly(styrene-divinylbenzene) beads for use in affinity chromatography, J. Chromatogr. A, 758, 53, 10.1016/S0021-9673(96)00710-8 Wang, 2009, Graft copolymerization of 4-vinyl pyridine onto polyvinyl alcohol using Ce(IV) initiator and its antimicrobial activity microfiltration membranes, 255 Alghezawi, 2005, Separation of acetic acid-water mixtures through acrylonitrile grafted poly(vinyl alcohol) membranes by pervaporation, Chem. Eng. Process., 44, 51, 10.1016/j.cep.2004.03.007 Zheng, 2005, Graft copolymerization of water-soluble monomers containing quaternary ammonium group on poly(vinyl alcohol) using ceric ions, J. Appl. Polym. Sci., 97, 2186, 10.1002/app.21848 Gholap, 2004, Synthesis and characterization of hydrophobically modified poly(vinyl alcohol) hydrogel membrane, Polymer, 45, 5863, 10.1016/j.polymer.2004.06.032 Kuo, 2002, The study of hydrogen bonding and miscibility in poly(vinylpyridines) with phenolic resin, Polymer, 43, 3943, 10.1016/S0032-3861(02)00214-8 Moritani, 1998, Functional modification of poly(vinyl alcohol) by copolymerization. IV. Self-crosslinkable poly(vinyl alcohol)s, Polymer, 39, 923, 10.1016/S0032-3861(97)00340-6 Zhai, 2003, Poly(2-vinylpyridine)- and poly(4-vinylpyridine)-graft-poly(vinylidene fluoride) copolymers and their pH-sensitive microfiltration membranes, J. Membr. Sci., 217, 243, 10.1016/S0376-7388(03)00140-6 Li, 1998, Specific interaction between poly(styrene-co-4-vinylphenol) and poly(styrene-co-4-vinylpyridine) studied by C-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry, Macromolecules, 31, 7248, 10.1021/ma9718659 Cesterosl, 1994, Study of the miscibility of poly(vinyl pyridines) with poly(vinyl acetate), poly(vinyl alcohol) and their copolymers, J. Polym. Sci. B, 32, 223, 10.1002/polb.1994.090320203 Troger, 1997, Determination of the surface tension of microporous membranes using contact angle measurement, J. Colloid Interf. Sci., 194, 281, 10.1006/jcis.1997.5087 Erbil, 2003, Transformation of a simple plastic into a superhydrophobic surface, Science, 299, 1377, 10.1126/science.1078365 Goosen, 2004, Fouling of reverse osmosis and ultrafiltration membranes: a critical review, Sep. Sci. Technol., 39, 2261, 10.1081/SS-120039343 Li, 2004, Bacterial adhesion to glass and metal–oxide surfaces, Colloid Surf. B, 36, 81, 10.1016/j.colsurfb.2004.05.006 Tiller, 2001, Designing surfaces that kill bacteria on contact, Proc. Natl. Acad. Sci., 98, 5981, 10.1073/pnas.111143098 Klibanov, 2007, Permanently microbicidal materials coatings, J. Mater. Chem., 17, 2479, 10.1039/b702079a Shi, 2006, In vitro antibacterial and cytotoxicity assay of multilayered polyelectrolyte-functionalized stainless steel, J. Biomed. Mater. Res. A, 76, 826, 10.1002/jbm.a.30597