Hydrogen embrittlement and micro-damage in notched specimens of progressively cold-drawn pearlitic steel wires

Wetscher, 2007, Changes in the mechanical properties of a pearlitic steel due to large shear deformation, Mater. Sci. Eng., A, 445–446, 237, 10.1016/j.msea.2006.09.026 Brandaleze, 2015, Structural evolution of pearlite in steels with different carbon content under drastic deformation during cold drawing, Proc. Mater. Sci., 8, 1023, 10.1016/j.mspro.2015.04.164 Borchers, 2016, Cold-drawn pearlitic steel wires, Prog. Mater Sci., 82, 405, 10.1016/j.pmatsci.2016.06.001 Toribio, 2016, Tensile fracture behavior of progressively-drawn pearlitic steels, Metals, 6, 10.3390/met6050114 Toribio, 1998, Microstructure orientation in a pearlitic steel subjected to progressive plastic deformation, J. Mater. Sci. Lett., 17, 1037, 10.1023/A:1006647008543 Toribio, 1998, Effect of cold drawing on the microstructure and corrosion performance of high-strength steel, Mech. Time-Depend. Mater., 1, 307, 10.1023/A:1009714222132 Johansson, 2006, On the modeling of evolving anisotropy and large strains in pearlitic steel, Eur. J. Mech. A. Solids, 25, 1041, 10.1016/j.euromechsol.2006.02.003 Fang, 2015, Microstructure and mechanical properties of cold-drawn pearlitic wires affect by inherited texture, Mater. Des., 79, 60, 10.1016/j.matdes.2015.04.036 Toribio, 1997, Microstructure evolution in a pearlitic steel subjected to progressive plastic deformation, Mater. Sci. Eng., A, 234–236, 579, 10.1016/S0921-5093(97)00231-1 Toribio, 1998, Effect of cumulative cold drawing on the pearlite interlamellar spacing in eutectoid steel, Scr. Mater., 39, 323, 10.1016/S1359-6462(98)00166-3 Zelin, 2002, Microstructure evolution in pearlitic steels during wire drawing, Acta Mater., 50, 4431, 10.1016/S1359-6454(02)00281-1 Sauvage, 2002, Microstructure evolutions during drawing of a pearlitic steel containing 0.7 at.% copper, Scr. Mater., 46, 459, 10.1016/S1359-6462(02)00002-7 Larijani, 2014, The effect of anisotropy on crack propagation in pearlitic rail steel, Wear, 314, 57, 10.1016/j.wear.2013.11.034 Toribio, 2014, Microstructure and mechanical properties in progressively drawn pearlitic steel, Mater. Trans., 55, 93, 10.2320/matertrans.MA201316 Dollar, 1988, Influence of deformation substructure on flow and fracture of fully pearlitic steel, Acta Metall., 36, 311, 10.1016/0001-6160(88)90008-9 Nam, 1995, Void initiation and microstructural changes during wire drawing of pearlitic steels, Mater. Sci. Eng., 203, 10.1016/0921-5093(95)09826-7 Toribio, 1997, Microstructural basis of anisotropic fracture behaviour of heavily drawn steel, Int. J. Fract., 87, L83 Toribio, 2007, Fatigue crack propagation in cold drawn steel, Mater. Sci. Eng., A, 468–470, 267, 10.1016/j.msea.2006.07.172 Vehovar, 1998, Hydrogen-assisted stress-corrosion of prestressing wires in a motorway viaduct, Eng. Fail. Anal., 5, 21, 10.1016/S1350-6307(97)00034-4 Hardie, 2006, Hydrogen embrittlement of high strength pipeline steels, Corros. Sci., 48, 4378, 10.1016/j.corsci.2006.02.011 Perrin, 2010, Hydrogen embrittlement of prestressing cables, Corros. Sci., 52, 1915, 10.1016/j.corsci.2010.02.041 Hredil, 2015, Corrosion resistance of prestressing steel wires, Mater. Sci., 50, 665, 10.1007/s11003-015-9769-0 Mirochnik, 1984, Origin of a failure crack in ferritic-pearlitic steels in the presence of hydrogen, Mater. Sci., 20, 211, 10.1007/BF00720908 Nakamura, 2009, Hydrogen embrittlement and corrosion fatigue of corroded bridge wires, J. Constr. Steel Res., 65, 269, 10.1016/j.jcsr.2008.03.022 Vehovar, 1998, Hydrogen-assisted stress-corrosion of prestressing steel wires in a motorway viaduct, Eng. Fail. Anal., 5, 21, 10.1016/S1350-6307(97)00034-4 Toribio, 1997, Hydrogen-assisted micro-damage evolution in pearlitic steel, J. Mater. Sci. Lett., 16, 1345, 10.1023/A:1018520218360 Toribio, 2000, A hydrogen diffusion model for applications in fusion nuclear technology, Fusion Eng. Des., 51–52, 213, 10.1016/S0920-3796(00)00316-1 Toribio, 2010, Two-dimensional numerical modelling of hydrogen diffusion in metals assisted by both stress and strain, Adv. Mater. Res., 138, 117, 10.4028/www.scientific.net/AMR.138.117 Panasyuk, 2014, Influence of the stress-strain state on the distribution of hydrogen concentration in the process zone, Mater. Sci., 50, 315, 10.1007/s11003-014-9723-6 Toribio, 2015, A generalised model of hydrogen diffusion in metals with multiple trap types, Philos. Mag., 95, 3429, 10.1080/14786435.2015.1079660 Thompson, 1982, Identification of a fracture mode: the tearing topography surface, Metal. Trans., 10A, 379 Costa, 1982, Hydrogen cracking in nominally pearlitic 1045 steel, Metal. Trans., 13A, 1315, 10.1007/BF02645516 Toribio, 1991, Characteristics of the new tearing topography surface, Scr. Metal. Mater., 25, 2239, 10.1016/0956-716X(91)90007-N Toribio, 1992, The tearing topography surface as the zone associated with hydrogen embrittlement processes in pearlitic steel, Metall. Trans., 23A, 1573, 10.1007/BF02647339 Toribio, 1997, Fracture mechanics approach to hydrogen-assisted microdamage in eutectoid steel, Metall. Mater. Trans., 28A, 191, 10.1007/s11661-997-0095-5 Toribio, 2012, Time-dependent triaxiality effects on hydrogen-assisted micro-damage evolution in pearlitic steel, ISIJ Int., 52, 228, 10.2355/isijinternational.52.228 Enos, 2002, A critical-strain criterion for hydrogen embrittlement of cold-drawn, ultrafine pearlitic steel, Metall. Mater. Trans. A, 33, 1151, 10.1007/s11661-002-0217-z Toribio, 2011, Optimization of the simulation of stress-assisted hydrogen diffusion for studies of hydrogen embrittlement of notched bars, Mater. Sci., 46, 819, 10.1007/s11003-011-9358-9 Lufrano, 1998, Enhanced hydrogen concentrations ahead of rounded notches and cracks - competition between plastic strain and hydrostatic stress, Acta Mater., 46, 1519, 10.1016/S1359-6454(97)00364-9 Stashchuk, 2012, Evaluation of hydrogen stresses in metal and redistribution of hydrogen around crack-like defects, Int. J. Hydrogen Energy, 37, 10.1016/j.ijhydene.2012.07.093 Ayas, 2014, A fracture criterion for the notch strength of high strength steels in the presence of hydrogen, J. Mech. Phys. Solids, 63, 80, 10.1016/j.jmps.2013.10.002 Wang, 2005, Crosshead speed dependence of the notch tensile strength of a high strength steel in the presence of hydrogen, Scr. Mater., 53, 713, 10.1016/j.scriptamat.2005.05.014 Raykar, 2013, Study of hydrogen concentration dependent growth of external annular crack in round tensile specimen using cohesive zone model, Eng. Fract. Mech., 106, 49, 10.1016/j.engfracmech.2013.04.007 Toribio, 2016, Influence of loading rate on the hydrogen-assisted micro-damage in bluntly notched samples of pearlitic steel, Metals, 6, 10.3390/met6010011 Toribio, 2017, Hydrogen effects in multiaxial fracture of cold-drawn pearlitic steel wires, Eng. Fract. Mech., 174, 243, 10.1016/j.engfracmech.2016.12.020 Kanvinde, 2017, Predicting fracture in civil engineering steel structures: state of the art, J. Struct. Eng., 143, 10.1061/(ASCE)ST.1943-541X.0001704 Beloglazov, 1983, Influence of the stress-strain state of reinforcing steels on the adsorption of hydrogen from cement extract, Mater. Sci., 19, 239, 10.1007/BF00723391 Tang, 2012, Corrosion behavior of steel in simulated concrete pore solutions treated with calcium silicate hydrates, Constr. Build. Mater., 30, 252, 10.1016/j.conbuildmat.2011.11.033 Toribio, 1993, Effect of cold drawing on susceptibility to hydrogen embrittlement of prestressing steel, Mater. Struct., 26, 30, 10.1007/BF02472235 Gamboa, 2003, Environmental influence on the stress corrosion cracking of rock bolts, Eng. Fail. Anal., 10, 521, 10.1016/S1350-6307(03)00036-0 Toribio, 2004, Evolution of hydrogen-assisted micro-damage in progressively drawn pearlitic steel, Mater. Lett., 58, 2541, 10.1016/j.matlet.2004.03.012 Toribio, 2013, Role of microstructural anisotropy in the hydrogen-assisted fracture of pearlitic steel notched bars, Int. J. Fract., 182, 149, 10.1007/s10704-013-9844-1 Toribio, 2015, Hydrogen diffusion in metals assisted by stress: 2D numerical modelling and analysis of directionality, Solid State Phenom., 225, 33, 10.4028/www.scientific.net/SSP.225.33 Toribio, 2011, Effects of manufacturing-induced residual stresses and strains on hydrogen embrittlement of cold drawn steels, Procedia Eng., 10, 3540, 10.1016/j.proeng.2011.04.583 Toribio, 2011, Role of drawing-induced residual stresses and strains in the hydrogen embrittlement susceptibility of prestressing steels, Corros. Sci., 53, 3346, 10.1016/j.corsci.2011.06.012 Toribio, 2014, Influence of the die geometry on the hydrogen embrittlement susceptibility of cold drawn wires, Eng. Fail. Anal., 36, 215, 10.1016/j.engfailanal.2013.10.010