Hybrid smart cementitious materials incorporating ladder scale carbon fiber reinforcement: An experimental investigation

Falara, 2022, CNT amount and type: crucial parameters in mechanical performance enhancement on cement paste nanocomposites, J. Phys.: Conf. Ser., 2321 Thomoglou, 2022, Influence of different surfactants on carbon fiber dispersion and the mechanical performance of smart piezoresistive cementitious composites, Fibers, 10, 49, 10.3390/fib10060049 Chen, 1993, Concrete reinforced with up to 0.2 vol% of short carbon fibers, Composites, 24, 33, 10.1016/0010-4361(93)90261-6 Wang, 2017, The influence of rheological parameters of cement paste on the dispersion of carbon nanofibers and self-sensing performance, Constr. Build. Mater., 134, 673, 10.1016/j.conbuildmat.2016.12.176 Alanazi, 2022, Effect of edge oxidized graphene oxide on micro and macro mechanical properties and microstructure of cement paste, Int. J. Mater. Res., 113, 271, 10.1515/ijmr-2021-8337 Alqader, 2022, Enhanced mechanical and durability properties of cement mortar by using alumina nanocoating on carbon nanofibers, Materials, 15, 2768, 10.3390/ma15082768 Brown, 2022, Effect of carbon nanofiber clustering on the micromechanical properties of a cement paste, Nanomaterials, 12, 223, 10.3390/nano12020223 Metaxa, 2022, Dispersion of multi-walled carbon nanotubes into white cement mortars: the effect of concentration and surfactants, Nanomaterials, 12, 1031, 10.3390/nano12061031 Cholker, 2019, Micro carbon fiber based concrete as a strain-damage sensing material, Mater. Today Proc., 19, 152, 10.1016/j.matpr.2019.06.629 Gull, 2020, Effect of super plasticizers on fresh and hardened state properties of short carbon fiber reinforced electrically conductive concrete, Int. J. Recent Technol. Eng., 8, 2644 Ivorra, 2010, Effect of silica fume particle size on mechanical properties of short carbon fiber reinforced concrete, Mater. Des., 31, 1553, 10.1016/j.matdes.2009.09.050 Wen, 1999, Seebeck effect in carbon fiber-reinforced cement, Cem. Concr. Res., 29, 1989, 10.1016/S0008-8846(99)00185-4 Birgin, 2023, Self-sensing eco-earth composite with carbon microfibers for sustainable smart buildings, J. Compos. Sci., 7, 63, 10.3390/jcs7020063 Falara, 2019, Enhanced post-crack load carrying capacity of nano and micro scale carbon fiber reinforced mortars, Struct. Integr., 8, 75, 10.1007/978-3-030-21894-2_15 Safiuddin, 2018, Key mechanical properties and microstructure of carbon fibre reinforced self-consolidating concrete, Constr. Build. Mater., 164, 477, 10.1016/j.conbuildmat.2017.12.172 Chen, 1993, Carbon fiber reinforced concrete as an electrical contact material for smart structures, Smart Mater. Struct., 2, 181, 10.1088/0964-1726/2/3/006 Chung, 2005, Dispersion of short fibers in cement, J. Mater. Civ. Eng., 17, 379, 10.1061/(ASCE)0899-1561(2005)17:4(379) Chuang, 2017, Dispersion of carbon fibers and conductivity of carbon fiber-reinforced cement-based composites, Ceram. Int., 43, 15122, 10.1016/j.ceramint.2017.08.041 Zhu, 2021, Evaluation of carbon fiber dispersion in cement-based materials using mechanical properties, conductivity, mass variation coefficient, and microstructure, Constr. Build. Mater., 266, 10.1016/j.conbuildmat.2020.120891 Metaxa, 2021, Nanomaterials in cementitious composites: an update, Molecules, 26, 1430, 10.3390/molecules26051430 Konsta-Gdoutos, 2017, Effect of CNT and CNF loading and count on the corrosion resistance, conductivity and mechanical properties of nano modified OPC mortars, Constr. Build. Mater., 147, 48, 10.1016/j.conbuildmat.2017.04.112 Kim, 2021, Dispersion of single wall carbon nanotube using air entraining agent and its application to portland cement paste, Constr. Build. Mater., 302, 10.1016/j.conbuildmat.2021.124421 Jóźwiak, 2021, Effect of ultrasonication time on microstructure, thermal conductivity, and viscosity of ionanofluids with originally ultra-long multi-walled carbon nanotubes, Ultrason. Sonochem., 77, 10.1016/j.ultsonch.2021.105681 Gkaravela, 2022, The use of electrochemical impedance spectroscopy as a tool for the in-situ monitoring and characterization of carbon nanotube aqueous dispersions, Nanomaterials, 12, 4427, 10.3390/nano12244427 Parveen, 2015, Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique, Cem. Concr. Res., 73, 215, 10.1016/j.cemconres.2015.03.006 Sindu, 2017, Properties of carbon nanotube reinforced cement composite synthesized using different types of surfactants, Constr. Build. Mater., 155, 389, 10.1016/j.conbuildmat.2017.08.059 Kang, 2020, Effect of single-walled carbon nanotubes on strength properties of cement composites, Materials, 13, 1305, 10.3390/ma13061305 Danoglidis, 2019, Relationship between the carbon nanotube dispersion state, electrochemical impedance, and capacitance, and mechanical properties of percolative nano reinforced OPC mortars, Carbon, 145, 218, 10.1016/j.carbon.2018.12.088 Banthia, 2004, Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices, Mater. Struct. / Matriaux Et. Constr., 37, 707, 10.1007/BF02480516 Metaxa, 2010, Mechanical properties and nanostructure of cement-based materials reinforced with carbon nanofibers and Polyvinyl Alcohol (PVA) microfibers, Acids Spec. Publ. 270: Adv. Mater. Sci. Concr., 270, 115 Li, 2008, Effect of chemical vapor deposition treatment of carbon fibers on the reflectivity of carbon fiber-reinforced cement-based composites, Compos. Sci. Technol., 68, 1105, 10.1016/j.compscitech.2007.08.003 Danoglidis, 2022, Designing carbon nanotube and nanofiber-polypropylene hybrid cementitious composites with improved pre-and post-crack load carrying and energy absorption capacity, Eng. Fract. Mech., 262, 10.1016/j.engfracmech.2022.108253 Akbar, 2021, Exploring mechanical performance of hybrid MWCNT and GNMP reinforced cementitious composites, Constr. Build. Mater., 267, 10.1016/j.conbuildmat.2020.120721 Du, 2020, Hybrid graphene oxide/carbon nanotubes reinforced cement paste: an investigation on hybrid ratio, Constr. Build. Mater., 261, 10.1016/j.conbuildmat.2020.119815 Voutetaki, 2016, Investigation of a new experimental method for damage assessment of RC beams failing in shear using piezoelectric transducers, Eng. Struct., 114, 226, 10.1016/j.engstruct.2016.02.014 Chalioris, 2021, Flexural damage diagnosis in reinforced concrete beams using a wireless admittance monitoring system-tests and finite element analysis, Sensors, 21, 679, 10.3390/s21030679 Fu, 1996, Self-monitoring of fatigue damage in carbon fiber reinforced cement, Cem. Concr. Res., 26, 15, 10.1016/0008-8846(95)00184-0 Azhari, 2012, A. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing, Cem. Concr. Compos., 34, 866, 10.1016/j.cemconcomp.2012.04.007 Shah, 1995 Gdoutos, 2005 Gdoutos, 2016, Portland cement mortar nanocomposites at low carbon nanotube and carbon nanofiber content: a fracture mechanics experimental study, Cem. Concr. Compos., 70, 110, 10.1016/j.cemconcomp.2016.03.010 Cholker, 2019, Influence of carbon fibers on strain and damage sensing of self compacting concrete under external applied forces, Instrum. Mes. Métrol, 18, 559 Martinelli, 2020, Meso-scale formulation of a cracked-hinge model for hybrid fiber-reinforced cement composites, Fibers, 8, 56, 10.3390/fib8090056 Collins, 2012, The influences of admixtures on the dispersion, workability, and strength of carbon nanotube–OPC paste mixtures, Cem. Concr. Compos., 34, 201, 10.1016/j.cemconcomp.2011.09.013 Shao, 2017, Influence of dispersants on the properties of CNTs reinforced cement-based materials, Constr. Build. Mater., 131, 186, 10.1016/j.conbuildmat.2016.11.053 Kim, 2019, Rheological properties of cement paste mixed with aqueously dispersed single-walled carbon nanotubes, J. Korea Inst. Build. Constr., 19, 113 Wang, 2008, Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites, Mater. Sci. Eng. A, 487, 52, 10.1016/j.msea.2007.09.073 Shah, 1991, Mechanical behavior of fiber reinforced cement-based composites, J. Am. Ceram. Soc., 74, 2727, 10.1111/j.1151-2916.1991.tb06836.x Han, 2012, Fabrication of piezoresistive CNT/CNF cementitious composites with superplasticizer as a dispersant, J. Mater. Civ. Eng., 24, 658, 10.1061/(ASCE)MT.1943-5533.0000435 Ismagilov, 2009, Structure and electrical conductivity of nitrogen-doped carbon nanofibers, Carbon, 47, 1922, 10.1016/j.carbon.2009.02.034 Wen, 2007, Piezoresistivity-based strain sensing in carbon fiber reinforced cement, Acids Mater. J., 104, 171 Anandamurthy, 2017, A review of fibrous reinforcements of concrete, J. Reinf. Plast. Compos., 36, 519, 10.1177/0731684416685168 Thomoglou, 2023, Smart cementitious sensors with nano-, micro-, and hybrid-modified reinforcement: mechanical and electrical properties, Sensors, 23, 2405, 10.3390/s23052405 Hunashyal, 2011, Experimental investigation of the effect of carbon nanotubes and carbon fibres on the behaviour of plain cement composite beams, IES J. Part A Civ. Struct. Eng., 4, 29, 10.1080/19373260.2011.548160 Isleem, 2023, Finite element, analytical, artificial neural network models for carbon fibre reinforced polymer confined concrete filled steel columns with elliptical cross sections, Front. Mater., 9, 1115394, 10.3389/fmats.2022.1115394 Isleem, 2022, Finite element and theoretical investigations on PVC–CFRP confined concrete columns under axial compression, Front. Mater., 9, 1055397, 10.3389/fmats.2022.1055397