Hybrid nanofluid flow towards an elastic surface with tantalum and nickel nanoparticles, under the influence of an induced magnetic field
Tóm tắt
Từ khóa
Tài liệu tham khảo
S.U.S. Choi, Enhancing thermal conductivity of fluids with nanoparticles, developments and applications of non-Newtonian flows, FED-Vol.231/MD-Vol. 66 (ASME, New York, 1995), pp. 99–105
J. Sarkar, A critical review on convective heat transfer correlations of nanofluids. Renew. Sustain. Energy Rev. 15(6), 3271–3277 (2011)
W. Yu, H. Xie, A review on nanofluids: preparation, stability mechanisms, and applications. J. Nanomater.2012 (2012)
K.V. Wong, O. De Leon, Applications of nanofluids: current and future. Nanotechnol. Energy 105–132 (2017)
D. Wen, G. Lin, S. Vafaei, K. Zhang, Review of nanofluids for heat transfer applications. Particuology 7(2), 141–150 (2009)
R. Saidur, K.Y. Leong, H.A. Mohammed, A review on applications and challenges of nanofluids. Renew. Sustain. Energy Rev. 15(3), 1646–1668 (2011)
H.A. Mohammed, G. Bhaskaran, N.H. Shuaib, R. Saidur, Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: a review. Renew. Sustain. Energy Rev. 15(3), 1502–1512 (2011)
G. Huminic, A. Huminic, Application of nanofluids in heat exchangers: a review. Renew. Sustain. Energy Rev. 16(8), 5625–5638 (2012)
O. Mahian, A. Kianifar, S.A. Kalogirou, I. Pop, S. Wongwises, A review of the applications of nanofluids in solar energy. Int. J. Heat Mass Transf. 57(2), 582–594 (2013)
L. Cheng, L. Liu, Boiling and two-phase flow phenomena of refrigerant-based nanofluids: fundamentals, applications and challenges. Int. J. Refrig. 36(2), 421–446 (2013)
E.E. Michaelides, Nanofluidics: thermodynamic and transport properties (Springer International Publishing, 2014)
E.E. Michaelides, Nanoparticle diffusivity in narrow cylindrical pores. Int. J. Heat Mass Transf. 114, 607–612 (2017)
J. Sarkar, Performance of nanofluid-cooled shell and tube gas cooler in transcritical CO2 refrigeration systems. Appl. Therm. Eng. 31(14–15), 2541–2548 (2011)
C.J. Ho, J.B. Huang, P.S. Tsai, Y.M. Yang, On laminar convective cooling performance of hybrid water-based suspensions of Al2O3 nanoparticles and MEPCM particles in a circular tube. Int. J. Heat Mass Transf. 54(11–12), 2397–2407 (2011)
D. Madhesh, R. Parameshwaran, S. Kalaiselvam, Experimental investigation on convective heat transfer and rheological characteristics of Cu-TiO2 hybrid nanofluids. Exp. Therm. Fluid Sci. 52, 104–115 (2014)
S. Suresh, K.P. Venkitaraj, P. Selvakumar, M. Chandrasekar, Effect of Al2O3-Cu/water hybrid nanofluid in heat transfer. Exp. Therm. Fluid Sci. 38, 54–60 (2012)
M. Baghbanzadeh, A. Rashidi, A.H. Soleimanisalim, D. Rashtchian, Investigating the rheological properties of nanofluids of water/hybrid nanostructure of spherical silica/MWCNT. Thermochim. Acta 578, 53–58 (2014)
Y. He, S. Vasiraju, L. Que, Hybrid nanomaterial-based nanofluids for micropower generation. RSC Adv. 4(5), 2433–2439 (2014)
L.S. Sundar, M.K. Singh, A.C. Sousa, Enhanced heat transfer and friction factor of MWCNT-Fe3O4/water hybrid nanofluids. Int. Commun. Heat Mass Transf. 52, 73–83 (2014)
Y. Xuan, H. Duan, Q. Li, Enhancement of solar energy absorption using a plasmonic nanofluid based on TiO2/Ag composite nanoparticles. RSC Adv. 4(31), 16206–16213 (2014)
T.T. Baby, S. Ramaprabhu, Synthesis and nanofluid application of silver nanoparticles decorated graphene. J. Mater. Chem. 21(20), 9702–9709 (2011)
T.T. Baby, S. Ramaprabhu, Experimental investigation of the thermal transport properties of a carbon nanohybrid dispersed nanofluid. Nanoscale 3(5), 2208–2214 (2011)
L. Chen, W. Yu, H. Xie, Enhanced thermal conductivity of nanofluids containing Ag/MWNT composites. Powder Technol. 231, 18–20 (2012)
S.S. Jyothirmayee Aravind, S. Ramaprabhu, Graphene wrapped multiwalled carbon nanotubes dispersed nanofluids for heat transfer applications. J. Appl. Phys. 112(12), 124304 (2012)
S.J. Aravind, S. Ramaprabhu, Graphene-multiwalled carbon nanotube-based nanofluids for improved heat dissipation. RSC Adv. 3(13), 4199–4206 (2013)
A.R. Abdel Fattah, T. Majdi, A.M. Abdalla, S. Ghosh, I.K. Puri, Nickel nanoparticles entangled in carbon nanotubes: novel ink for nanotube printing. ACS Appl. Mater. Interfaces 8(3), 1589–1593 (2016)
I. Bibi, S. Kamal, A. Ahmed, M. Iqbal, S. Nouren, K. Jilani, N. Nazar, M. Amir, A. Abbas, S. Ata, F. Majid, Nickel nanoparticle synthesis using Camellia sinensis as reducing and capping agent: growth mechanism and photo-catalytic activity evaluation. Int. J. Biol. Macromol. 103, 783–790 (2017)
H. Ni, J. Zhu, Z. Wang, H. Lv, Y. Su, X. Zhang, A brief overview on grain growth of bulk electrodeposited nanocrystalline nickel and nickel-iron alloys. Rev. Adv. Mater. Sci. 58(1), 98–106 (2019)
A.R. Mary, C.S. Sandeep, T.N. Narayanan, R. Philip, P. Moloney, P.M. Ajayan, M.R. Anantharaman, Nonlinear and magneto-optical transmission studies on magnetic nanofluids of non-interacting metallic nickel nanoparticles. Nanotechnology 22(37), 375702 (2011)
Y. Cheng, M. Guo, M. Zhai, Y. Yu, J. Hu, Nickel nanoparticles anchored onto Ni foam for supercapacitors with high specific capacitance. J. Nanosci. Nanotechnol. 20(4), 2402–2407 (2020)
S. Kiran, M.A. Rafique, S. Iqbal, S. Nosheen, S. Naz, A. Rasheed, Synthesis of nickel nanoparticles using Citrullus colocynthis stem extract for remediation of Reactive Yellow 160 dye. Environ. Sci. Pollut. Res. 27(20), 32998–33007 (2020)
M.M. Barsan, T.A. Enache, N. Preda, G. Stan, N.G. Apostol, E. Matei, A. Kuncser, V.C. Diculescu, Direct immobilization of biomolecules through magnetic forces on Ni electrodes via Ni nanoparticles: applications in electrochemical biosensors. ACS Appl. Mater. Interfaces 11(16), 19867–19877 (2019)
D. Hill, A.R. Barron, S. Alexander, Comparison of hydrophobicity and durability of functionalized aluminium oxide nanoparticle coatings with magnetite nanoparticles-links between morphology and wettability. J. Colloid Interface Sci. 555, 323–330 (2019)
A. Sagasti, V. Palomares, J.M. Porro, I. Orúe, M.B. Sánchez-Ilárduya, A.C. Lopes, J. Gutiérrez, Magnetic, magnetoelastic and corrosion resistant properties of (Fe-Ni)-based metallic glasses for structural health monitoring applications. Materials 13(1), 57 (2020)
D. Wang, Y. Jia, Y. He, L. Wang, J. Fan, H. Xie, W. Yu, Enhanced photothermal conversion properties of magnetic nanofluids through rotating magnetic field for direct absorption solar collector. J. Colloid Interface Sci. 557, 266–275 (2019)
R.E. Abo-Elkhair, M.M. Bhatti, K.S. Mekheimer, Magnetic force effects on peristaltic transport of hybrid bio-nanofluid (AuCu nanoparticles) with moderate Reynolds number: an expanding horizon. Int. Commun. Heat Mass Transf. 123, 105228 (2021)
G. Mohandas, N. Oskolkov, M.T. McMahon, P. Walczak, M. Janowski, Porous tantalum and tantalum oxide nanoparticles for regenerative medicine. Acta Neurobiol Exp (Wars) 74(2), 188–196 (2014)
C.S. Tiwari, A. Pratap, P.K. Jha, Influence of size, shape and dimension on glass transition and Kauzmann temperature of silver (Ag) and tantalum (Ta) nanoparticles. J. Nanopart. Res. 22(8), 1–10 (2020)
Z. Xiong, L. Wenbin, H. Qian, T. Lei, X. He, Y. Hu, P. Lei, Tantalum nanoparticles reinforced PCL scaffolds using direct 3D printing for bone tissue engineering. Front. Mater. 8, 10 (2021)
M. Hassan, M. Marin, R. Ellahi, S.Z. Alamri, Exploration of convective heat transfer and flow characteristics synthesis by Cu-Ag/water hybrid-nanofluids. Heat Transf. Res. 49(12), 1837–1848 (2018)
M.I. Afridi, I. Tlili, M. Goodarzi, M. Osman, N.A. Khan, Irreversibility analysis of hybrid nanofluid flow over a thin needle with effects of energy dissipation. Symmetry 11(5), 663 (2019)
S. Dinarvand, M.N. Rostami, R. Dinarvand, I. Pop, Improvement of drug delivery micro-circulatory system with a novel pattern of CuO-Cu/blood hybrid nanofluid flow towards a porous stretching sheet. Int. J. Numer. Methods Heat Fluid Flow 29(11), 4408–4429 (2019)
A.J. Chamkha, A.S. Dogonchi, D.D. Ganji, Magneto-hydrodynamic flow and heat transfer of a hybrid nanofluid in a rotating system among two surfaces in the presence of thermal radiation and Joule heating. AIP Adv. 9(2), 025103 (2019)
I. Tlili, H.A. Nabwey, G.P. Ashwinkumar, N. Sandeep, 3-D magnetohydrodynamic AA7072-AA7075/methanol hybrid nanofluid flow above an uneven thickness surface with slip effect. Sci. Rep. 10(1), 1–13 (2020)
U. Khan, A. Shafiq, A. Zaib, D. Baleanu, Hybrid nanofluid on mixed convective radiative flow from an irregular variably thick moving surface with convex and concave effects. Case Stud. Therm. Eng. 21, 100660 (2020)
P. Sreedevi, P.S. Reddy, A. Chamkha, Heat and mass transfer analysis of unsteady hybrid nanofluid flow over a stretching sheet with thermal radiation. SN Appl. Sci. 2(7), 1–15 (2020)
I. Waini, A. Ishak, I. Pop, Hybrid nanofluid flow towards a stagnation point on a stretching/shrinking cylinder. Sci. Rep. 10(1), 1–12 (2020)
A. Rehman, Z. Salleh, Approximate analytical analysis of unsteady MHD mixed flow of non-Newtonian hybrid nanofluid over a stretching surface. Fluids 6(4), 138 (2021)
W. Jamshed, S.U. Devi, K.S. Nisar, Single phase based study of Ag-Cu/EO Williamson hybrid nanofluid flow over a stretching surface with shape factor. Phys. Scr. 96(6), 065202 (2021)
L. Zhang, T. Nazar, M.M. Bhatti, E.E. Michaelides, Stability analysis on the kerosene nanofluid flow with hybrid zinc/aluminum-oxide (ZnO-Al2O3) nanoparticles under Lorentz force. Int. J. Numer. Methods Heat Fluid Flow (2021). https://doi.org/10.1108/HFF-02-2021-0103
T.R. Mahapatra, A.S. Gupta, Heat transfer in stagnation-point flow towards a stretching sheet. Heat Mass Transf. 38(6), 517–521 (2002)
A. Ishak, R. Nazar, I. Pop, Mixed convection boundary layers in the stagnation-point flow toward a stretching vertical sheet. Meccanica 41(5), 509–518 (2006)
R. Nazar, N. Amin, D. Filip, I. Pop, Unsteady boundary layer flow in the region of the stagnation point on a stretching sheet. Int. J. Eng. Sci. 42(11–12), 1241–1253 (2004)
F.M. Ali, R. Nazar, N.M. Arifin, I. Pop, MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field. Appl. Math. Mech. 32(4), 409–418 (2011)