Human-robot collaboration while sharing production activities in dynamic environment: SPADER system

Krüger, 2009, Cooperation of human and machines in assembly lines, CIRP Ann. - Manuf. Technol., 58, 628, 10.1016/j.cirp.2009.09.009 Kronander, 2014, Learning compliant manipulation through kinesthetic and tactile human-robot interaction, IEEE Trans. Haptics, 7, 367, 10.1109/TOH.2013.54 G. Maeda, M. Ewerton, R. Lioutikov, H. Ben Amor, J. Peters, G. Neumann, Learning interaction for collaborative tasks with probabilistic movement primitives, in: Proceedings of the 4th IEEE-RAS International Conference on Humanoid Robots (Humanoids), 2014, pp. 527–534. G. Reinhart, R. Spillner, Y. Shen, Approaches of applying human-robot-interaction-technologies to assist workers with musculoskeletal disorders in production, in: Intelligent Robotics and Applications, Lecture Notes in Computer Science, Springer Berlin Heidelberg, 2012, pp. 74–84. Esperance, 2014, Safety hierarchy for planning with time constraints in unknown dynamic environments, IEEE Trans. Robot., 30, 1398, 10.1109/TRO.2014.2354933 Wu, 2009, Development of a configuration space motion planner for robot in dynamic environment, Robot. Comput.-Integr. Manuf., 25, 13, 10.1016/j.rcim.2007.04.004 S. David, C. Hoam, K. Hyoun Jin, S. Shankar, Autonomous Exploration In Unknown Urban Environments For Unmanned Aerial Vehicles, AIAA Guidance, Navigation, and Control Conference and Exhibit, Guidance, Navigation, and Control and Co-located Conferences: American Institute of Aeronautics and Astronautics, 2005. Khoukhi, 2008, A hierarchical neuro-fuzzy system to near optimal-time trajectory planning of redundant manipulators, Eng. Appl. Artif. Intell., 21, 974, 10.1016/j.engappai.2007.12.004 Gasparetto, 2012, Trajectory planning in robotics, Math. Comput. Sci., 6, 269, 10.1007/s11786-012-0123-8 Persson, 2014, Sampling-based A* algorithm for robot path-planning, Int. J. Robot. Res., 33, 1683, 10.1177/0278364914547786 Tang, 2012, A review on robot motion planning approaches, Pertanika J. Sci. Technol., 20, 15 P. Chotiprayanakul, D. Liu, D. Wang, G. Dissanayake, Collision-Free Trajectory planning for manipulator using virtual force based approach, in: Proceedings of the International Conference on Engineering on Applied Sciences, and Technology (ICEAST), Bangkok, Thailand, 2007, pp. 4. M. Geravand, F. Flacco, A.De Luca, Human-robot physical interaction and collaboration using an industrial robot with a closed control architecture, in: Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), Karlsruhe, Germany, 2013, pp. 4000–4007. O. Khatib, Real-time obstacle avoidance for manipulators and mobile robots, in: Proceedings of the IEEE International Conference on Robotics and Automation, 1985, pp. 500– 505. F. Flacco, T. Kroger, A. De Luca, O. Khatib, A depth space approach to human-robot collision avoidance, in: Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), RiverCentre, Saint Paul, Minnesota - USA, 2012, pp. 338–345. Khansari-Zadeh, 2012, A dynamical system approach to realtime obstacle avoidance, Auton. Robots, 32, 433, 10.1007/s10514-012-9287-y Agudelo-Toro, 2010, Transition management for the smooth flight of a small autonomous helicopter, J. Intell. Robot. Syst., 58, 69, 10.1007/s10846-009-9344-8 Yongguo, 2010, Trajectory planning algorithm based on quaternion for 6-DOF aircraft wing automatic position and pose adjustment method, Chin. J. Aeronaut., 23, 707, 10.1016/S1000-9361(09)60273-9 Lin, 2014, A fast and unified method to find a minimum-jerk robot joint trajectory using particle swarm optimization, J. Intell. Robot. Syst., 75, 379, 10.1007/s10846-013-9982-8 L. Biagiotti, C. Melchiorri, Online trajectory planning and filtering for robotic applications via B-spline smoothing filters, in: Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2013, pp. 5668–5673. Fang, 2012, Interactive robot trajectory planning and simulation using Augmented Reality, Robot. Comput.-Integr. Manuf., 28, 227, 10.1016/j.rcim.2011.09.003 Liu, 2013, Time-optimal and jerk-continuous trajectory planning for robot manipulators with kinematic constraints, Robot. Comput.-Integr. Manuf., 29, 309, 10.1016/j.rcim.2012.08.002 Chang, 2014, A collision-free G2 continuous path-smoothing algorithm using quadratic polynomial interpolation, Int. J. Adv. Robot. Syst., 11, 1, 10.5772/59463 Abe, 2011, Trajectory planning for flexible Cartesian robot manipulator by using artificial neural network: numerical simulation and experimental verification, Robotica, 29, 797, 10.1017/S0263574710000767 Tang, 2014, Predicting the motion of a robot manipulator with unknown trajectories based on an artificial neural network, Int. J. Adv. Robot. Syst., 1 C. Silva, M. Crisostomo, B. Ribeiro, MONODA: a neural modular architecture for obstacle avoidance without knowledge of the environment, in: Proceedings of the IEEE-INNS-ENNS International Joint Conference on Neural Networks, Vol. 6, 2000, pp. 334–339. Daachi, 2012, Adaptive neural controller for redundant robot manipulators and collision avoidance with mobile obstacles, Neurocomputing, 79, 50, 10.1016/j.neucom.2011.10.001 Kumar, 2012, A neural network based path planning algorithm for extinguishing forest fires, Int. J. Comput. Sci. Issues, 9, 563 Duguleana, 2012, Obstacle avoidance of redundant manipulators using neural networks based reinforcement learning, Robot. Comput.-Integr. Manuf., 28, 132 M. Haddad, T. Chettibi, W. Khalil, H. Lehtihet, "Trajectory Generation," Modeling, Performance Analysis and Control of Robot Manipulators, ISTE, 2010, pp. 189–239. Khalil, 2004, Chapter 13 - Trajectory generation, 313 Craig, 2005 Chun-Shin, 1983, Formulation and optimization of cubic polynomial joint trajectories for industrial robots, IEEE Trans. Autom. Control, 28, 1066, 10.1109/TAC.1983.1103181 Latré, 2011, A survey on wireless body area networks, Wirel. Netw., 17, 1, 10.1007/s11276-010-0252-4 P. Li, R. Meziane, M.J.-.D. Otis, H. Ezzaidi, P. Cardou, A Smart Safety Helmet using IMU and EEG sensors for worker fatigue detection, in: Proceedings of the IEEE International Symposium on RObotic and SEnsors Environments (ROSE), Timisoara, Romania. E. Barkallah, M.J.-.D. Otis, S. Ngomo, M. Heraud, Measuring Operator’s Pain: Toward Evaluating Musculoskeletal Disorder at Work, in: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2015. R. Meziane, P. Li, M.J.-.D. Otis, H. Ezzaidi, P. Cardou, Safer hybrid workspace using human-robot interaction while sharing production activities, in: Proceedings of the IEEE International Symposium on RObotic and SEnsors Environments (ROSE), Timisoara, Romania, 2014. M.J.D. Otis, T.-.L. Nguyen-Dang, D. Laurendeau, C. Gosselin, Interference estimated time of arrival on a 6-DOF cable-driven haptic foot platform, in: Proceedings of the IEEE International Conference on Robotics and Automation ICRA '09, 2009, pp. 1067–1072. D. Henrich, C. Wurll, H. Worn, Online path planning with optimal C-space discretization, in: Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications, 1998, pp. 1479–1484. Wurll, 2001, Point‐to‐point and multi‐goal path planning for industrial robots, J. Robot. Syst., 18, 445, 10.1002/rob.1036 Rubio, 2016, Industrial robot efficient trajectory generation without collision through the evolution of the optimal trajectory, Robot. Auton. Syst., 86, 106, 10.1016/j.robot.2016.09.008 H. Wada, A. Kanazawa, K. Konada, Y. Wakabayashi, M. Kamioka, S. Kondo, J. Kinugawa, K. Kosuge, Dynamic collision avoidance method for co-worker robot using time augmented configuration-space, in: Proceedings of the 2016 IEEE International Conference on Mechatronics and Automation, 2016, pp. 2564–2569. Negnevitsky, 2005 AssociationFrançaise de Normalisation, "NF EN ISO 10218-1: Norme européenne: Norme française: Robots pour environnements industriels," AFNOR, 2006.