How to Prepare SMC and BMC-like Compounds to Perform Relevant Rheological Experiments?
Tóm tắt
The study of the rheology of injected or compression moulded compounds like SMC or BMC is made particularly difficult by the high content and the intricate arrangement of their fibrous reinforcement. For these two types of compounds, inappropriate rheological testing protocols and rheometers are often used, which leads to a very large scatter of the experimental data. This study describes specific sampling and specimen’s preparation methods, as well as dedicated rheometry devices to test their rheology. Following the proposed protocols, it is possible to obtain rheological measurements showing low scatter of the recorded stress values: about ±10% for SMC and about ±15% for BMC-like compounds.
Tài liệu tham khảo
Le Corre, S., Orgéas, L., Favier, D., Tourabi, A., Maazouz, A., Venet, C.: Shear and compression behaviour of sheet moulding compounds. Compos. Sci. Technol. 62, 571–577 (2002)
Dumont, P., Orgéas, L., Le Corre, S., Favier, D.: Anisotropic viscous behavior of Sheet Molding Compounds (SMC) during compression molding. Int. J. Plast. 19(5), 625–646 (2003)
Kanit, T., Forest, S., Galliet, I., Mounoury V., Jeulin, D.: Determination of the size of the representative volume element for random composites: statistical and numerical approach. Int. J. Solids Struct. 40(13–14), 3647–3679 (2003)
Auriault, J.-L., Boutin, C., Geindreau, C.: Homogenization of Coupled Phenomena in Heterogenous Media. Wiley-ISTE, ISBN: 978-1-84821-161-2 (2009)
Kotsikos, G., Gibson, A.G.: Investigation of the squeeze flow behaviour of sheet moulding compounds (SMC). Compos., Part A 29(12), 1569–1577 (1998)
Silva-Nieto, R.J., Fisher, B.C., Birley, A.W.: Rheological characterization of unsaturated polyester resin sheet molding compounds. Polym. Eng. Sci. 21(8), 499–506 (1981)
Lee, L.J., Marker, L.F., Griffith, R.M.: The rheology and mold flow of polyester sheet molding compound. Polym. Compos. 2(4), 209–218 (1981)
Lin, C.M., Weng, C.I., Ho, C.T.: Anisotropy in sheet molding compounds during compression molding. Polym. Compos. 18(5), 613–622 (1997)
Lin, C.M., Weng, C.I.: Simulation of compression molding for sheet molding compound considering the anisotropic effect. Polym. Compos. 20(1), 98–113 (1999)
Ericsson, K.A., Toll, S., Månson, J.-A.E.: Sliding plate rheometry of planar orientated concentrated fiber suspensions. Rheol. Acta 36, 397–405 (1997)
Rabinovich, M., Olsavsky, K.L., Leach, B., et al.: J. Appl. Polym. Sci. 109, 2465–2471 (2008)
Orgéas, L., Dumont, P.J.J.: Sheet molding compounds. In: Nicolais, L., Borzacchiello, A., Lee, S.M. (eds.) Wiley Encyclopedia of Composites, 2nd edn., ISBN: 978-0-470-12828-2, Wiley, 2683-2718 (2012)
Castro, J.M., Tomlinson, G.: Predicting molding forces in SMC compression molding. Polym. Eng. Sci. 30(24), 1568–573 (1990)
Davis, M., McAlea, K.P.: Stamping rheology of glass mat reinforced thermoplastic composites. Polym. Compos. 11(6), 368–378 (1990)
Engmann, J., Servais, C., Burbidge, A.S.: Squeeze flow theory and applications to rheometry: a review. J. Non-Newton. Fluid Mech. 132, 1–27 (2005)
Comte, E., Merhi, D., Michaud, V., Månson, J.A.E.: Void formation and transport during SMC manufacturing: effect of the glass fiber sizing. Polym. Compos. 27(3), 289–298 (2006)
Chalencon, F., Orgéas, L., Dumont, P.J.J., Foray, G., Cavaillé, J.-Y., Maire, E., Rolland du Roscoat, S.: Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar. Rheol. Acta 49(3), 221–235 (2010)
Guiraud, O., Dumont, P.J.J., Orgéas, L., Vassal, J.-P., Le, T.-H., Favier, D.: Towards the simulation of mould filling with polymer composites reinforced with mineral fillers and short fibres. Int. J. Mater. Forming 3, 1313–1326 (2010)
Orgéas, L., Dumont, P.J.J., Le, T.-H., Favier, D.: Lubricated compression of BMC, a concentrated and fibre-reinforced granular polymer suspension. Rheol. Acta 47(5–6), 677–688 (2008)
System for injecting composite substance inside a forming mould, Inventors: Bosg Patrick, Vergne Laurent, Applicant: Inoplast, Application number: EP98903095, Priority number: EP1007319 (1999)
Le, T.-H., Dumont, P., Orgéas, L., Favier, D., Salvo, L., Boller, E.: X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites. Compos., Part A, 39, 91–103 (2008)
Coussot, P.: Rhéophysique des pâtes et des suspensions. EDP Science, Les Ulis, France (1999)
Coussot, P., Ancey, C.: Rheophysical classification of concentrated suspensions. Phys. Rev. E 59, 4445–4457 (1999)