Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes

Kim, 2013, Metallic anodes for next generation secondary batteries, Chem. Soc. Rev., 42, 9011, 10.1039/c3cs60177c Cheng, 2017, Toward safe lithium metal anode in rechargeable batteries: a review, Chem. Rev., 117, 10403, 10.1021/acs.chemrev.7b00115 Lin, 2017, Reviving the lithium metal anode for high-energy batteries, Nat. Nanotechnol., 12, 194, 10.1038/nnano.2017.16 Lang, 2017, High performance lithium metal anode: progress and prospects, Energy Storage Mater., 7, 115, 10.1016/j.ensm.2017.01.006 Xu, 2014, Lithium metal anodes for rechargeable batteries, Energy Environ. Sci., 7, 513, 10.1039/C3EE40795K Ellis, 2012, Sodium and sodium-ion energy storage batteries, Curr. Opin. Solid State Mater. Sci., 16, 168, 10.1016/j.cossms.2012.04.002 Luo, 2015, Na metal anode: “holy Grail” for room-temperature na-ion batteries?, ACS Cent. Sci., 1, 420, 10.1021/acscentsci.5b00357 Hwang, 2017, Sodium-ion batteries: present and future, Chem. Soc. Rev., 46, 3529, 10.1039/C6CS00776G Wood, 2017, Lithium metal anodes: toward an improved understanding of coupled morphological, electrochemical, and mechanical behavior, ACS Energy Lett., 2, 664, 10.1021/acsenergylett.6b00650 Liu, 2017, Lithium metal anodes with an adaptive “Solid-Liquid” interfacial protective layer, J. Am. Chem. Soc., 139, 4815, 10.1021/jacs.6b13314 Zheng, 2014, Interconnected hollow carbon nanospheres for stable lithium metal anodes, Nat. Nanotechnol., 9, 618, 10.1038/nnano.2014.152 Kozen, 2017, Stabilization of lithium metal anodes by hybrid artificial solid electrolyte interphase, Chem. Mater., 29, 6298, 10.1021/acs.chemmater.7b01496 Kim, 2015, Controlled lithium dendrite growth by a synergistic effect of multilayered graphene coating and an electrolyte additive, Chem. Mater., 27, 2780, 10.1021/cm503447u Liang, 2017, A facile surface chemistry route to a stabilized lithium metal anode, Nat. Energy, 6, 17119, 10.1038/nenergy.2017.119 Wang, 2017, Long lifespan lithium metal anodes enabled by Al2O3 sputter coating, Energy Storage Mater. Zhang, 2014, Dendrite-free lithium deposition with self-aligned nanorod structure, Nano Lett., 14, 6889, 10.1021/nl5039117 Park, 2016, Micro-patterned lithium metal anodes with suppressed dendrite formation for post lithium-ion batteries, Adv. Mater. Interfaces, 3, 1600140, 10.1002/admi.201600140 Lin, 2016, Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes, Nat. Nanotechnol., 11, 626, 10.1038/nnano.2016.32 Li, 2017, Flexible Ti3C2 MXene-lithium film with lamellar structure for ultrastable metallic lithium anodes, Nano Energy, 39, 654, 10.1016/j.nanoen.2017.07.023 Cheng, 2017, Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes, Energy Storage Mater. Liu, 2016, Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode, Nat. Commun., 7, 10992, 10.1038/ncomms10992 Jin, 2017, 3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries, Nano Energy, 37, 177, 10.1016/j.nanoen.2017.05.015 Liang, 2016, Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating, Proc. Natl. Acad. Sci. USA, 113, 2862, 10.1073/pnas.1518188113 Lu, 2017, Lithiophilic Cu–Ni core–shell nanowire network as a stable host for improving lithium anode performance, Energy Storage Mater., 9, 31, 10.1016/j.ensm.2017.06.004 Zhang, 2016, A carbon nanofiber network for stable lithium metal anodes with high Coulombic efficiency and long cycle life, Nano Res., 9, 3428, 10.1007/s12274-016-1219-2 Zhang, 2017, A carbon-based 3D current collector with surface protection for Li metal anode, Nano Res., 10, 1356, 10.1007/s12274-017-1461-2 Zhang, 2016, Li2O-reinforced Cu nanoclusters as porous structure for dendrite-free and long-lifespan lithium metal anode, ACS Appl. Mater. Interfaces, 8, 26801, 10.1021/acsami.6b08775 Li, 2017, 3D porous Cu current collector/Li-metal composite anode for stable lithium-metal batteries, Adv. Funct. Mater., 27, 1606422, 10.1002/adfm.201606422 Yang, 2015, Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes, Nat. Commun., 6, 8058, 10.1038/ncomms9058 Yun, 2016, Chemical dealloying derived 3D porous current collector for Li metal anodes, Adv. Mater., 28, 6932, 10.1002/adma.201601409 Lu, 2016, Free-standing copper nanowire network current collector for improving lithium anode performance, Nano Lett., 16, 4431, 10.1021/acs.nanolett.6b01581 Xie, 2016, Toward dendrite-free lithium deposition via structural and interfacial synergistic effects of 3D Graphene@Ni scaffold, ACS Appl. Mater. Interfaces, 8, 26091, 10.1021/acsami.6b09031 Kang, 2016, Few-layer graphene island seeding for dendrite-free Li metal electrodes, ACS Appl. Mater. Interfaces, 8, 26895, 10.1021/acsami.6b09757 Cheng, 2016, Dendrite-free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries, Adv. Mater., 28, 2888, 10.1002/adma.201506124 Liu, 2016, Stabilizing lithium metal anodes by uniform Li-ion flux distribution in nanochannel confinement, J. Am. Chem. Soc., 138, 15443, 10.1021/jacs.6b08730 Chi, 2017, Prestoring lithium into stable 3D nickel foam host as dendrite-free lithium metal anode, Adv. Funct. Mater., 27, 1700348, 10.1002/adfm.201700348 Zhang, 2017, Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes, Angew. Chem. Int. Ed., 56, 7764, 10.1002/anie.201702099 Matsuda, 2017, Insulative microfiber 3D matrix as a host material minimizing volume change of the anode of Li metal batteries, ACS Energy Lett., 2, 924, 10.1021/acsenergylett.7b00149 Tikekar, 2016, Design principles for electrolytes and interfaces for stable lithium-metal batteries, Nat. Energy, 1, 16114, 10.1038/nenergy.2016.114 Miao, 2014, Novel dual-salts electrolyte solution for dendrite-free lithium-metal based rechargeable batteries with high cycle reversibility, J. Power Sources, 271, 291, 10.1016/j.jpowsour.2014.08.011 Guo, 2015, Vinylene carbonate–LiNO3: a hybrid additive in carbonic ester electrolytes for SEI modification on Li metal anode, Electrochem. Commun., 51, 59, 10.1016/j.elecom.2014.12.008 Markevich, 2017, Very stable lithium metal stripping–plating at a high rate and high areal capacity in fluoroethylene carbonate-based organic electrolyte solution, ACS Energy Lett., 2, 1321, 10.1021/acsenergylett.7b00300 Li, 2015, The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth, Nat. Commun., 6, 7436, 10.1038/ncomms8436 Qian, 2015, High rate and stable cycling of lithium metal anode, Nat. Commun., 6, 6362, 10.1038/ncomms7362 Shim, 2017, 2D boron nitride nanoflakes as a multifunctional additive in gel polymer electrolytes for safe, long cycle life and high rate lithium metal batteries, Energy Environ. Sci., 10.1039/C7EE01095H Zhang, 2017, Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries, Adv. Funct. Mater., 27, 1605989, 10.1002/adfm.201605989 Zhao, 2016, Li2S5-based ternary-salt electrolyte for robust lithium metal anode, Energy Storage Mater., 3, 77, 10.1016/j.ensm.2016.01.007 Liu, 2017, Extending the life of lithium-based rechargeable batteries by reaction of lithium dendrites with a novel silica nanoparticle sandwiched separator, Adv. Mater., 29, 1603987, 10.1002/adma.201603987 Shin, 2015, Effective suppression of dendritic lithium growth using an ultrathin coating of nitrogen and sulfur codoped graphene nanosheets on polymer separator for lithium metal batteries, ACS Appl. Mater. Interfaces, 7, 23700, 10.1021/acsami.5b07730 Liu, 2017, Making Li-metal electrodes rechargeable by controlling the dendrite growth direction, Nat. Energy, 2, 17083, 10.1038/nenergy.2017.83 Chazalviel, 1990, Electrochemical aspects of the generation of ramified metallic electrodeposits, Phys. Rev. A, 42, 7355, 10.1103/PhysRevA.42.7355 Brissot, 1999, Dendritic growth mechanisms in lithium/polymer cells, J. Power Sources, 81, 925, 10.1016/S0378-7753(98)00242-0 Seh, 2015, A highly reversible room-temperature sodium metal anode, ACS Cent. Sci., 1, 449, 10.1021/acscentsci.5b00328 Cao, 2016, Enabling room temperature sodium metal batteries, Nano Energy, 30, 825, 10.1016/j.nanoen.2016.09.013 Song, 2015, Dendrite-free polygonal sodium deposition with excellent interfacial stability in a NaAlCl4–2SO2 inorganic electrolyte, ACS Appl. Mater. Interfaces, 7, 27206, 10.1021/acsami.5b08111 Luo, 2017, Ultrathin surface coating enables the stable sodium metal anode, Adv. Energy Mater., 7, 1601526, 10.1002/aenm.201601526 Zhao, 2017, Superior stable and long life sodium metal anodes achieved by atomic layer deposition, Adv. Mater., 29, 1606663, 10.1002/adma.201606663 Kim, 2017, Enhancing the cycling stability of sodium metal electrodes by building an inorganic–organic composite protective layer, ACS Appl. Mater. Interfaces, 9, 6000, 10.1021/acsami.6b14437 Luo, 2017, Encapsulation of metallic Na in an electrically conductive host with porous channels as a highly stable na metal anode, Nano Lett., 17, 3792, 10.1021/acs.nanolett.7b01138 Cohn, 2017, Anode-free sodium battery through in situ plating of sodium metal, Nano Lett., 17, 1296, 10.1021/acs.nanolett.6b05174 Plowman, 2015, Building with bubbles: the formation of high surface area honeycomb-like films via hydrogen bubble templated electrodeposition, Chem. Commun., 51, 4331, 10.1039/C4CC06638C Kim, 2008, Preparation of copper foam with 3-dimensionally interconnected spherical pore network by electrodeposition, Electrochem. Commun., 10, 1148, 10.1016/j.elecom.2008.05.035 Zhang, 2012, Role of LiNO3 in rechargeable lithium/sulfur battery, Electrochim. Acta, 70, 344, 10.1016/j.electacta.2012.03.081 Zhang, 2016, A new finding on the role of LiNO3 in lithium-sulfur battery, J. Power Sources, 322, 99, 10.1016/j.jpowsour.2016.05.009 Jia, 2016, Extremely accessible potassium nitrate (KNO3) as the highly efficient electrolyte additive in lithium battery, ACS Appl. Mater. Interfaces, 8, 15399, 10.1021/acsami.6b03897 Cheng, 2016, A review of solid electrolyte interphases on lithium metal anode, Adv. Sci., 3, 1500213, 10.1002/advs.201500213 Busche, 2016, Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts, Nat. Chem., 8, 426, 10.1038/nchem.2470 Dedryvère, 2006, XPS valence characterization of lithium salts as a tool to study electrode/electrolyte interfaces of Li-Ion batteries, J. Phys. Chem. B, 110, 12986, 10.1021/jp061624f Aurbach, 2009, On the surface chemical aspects of very high energy density, rechargeable Li–sulfur batteries, J. Electrochem. Soc., 156, A694, 10.1149/1.3148721 Ely, 2013, Heterogeneous nucleation and growth of lithium electrodeposits on negative electrodes, J. Electrochem. Soc., 160, A662, 10.1149/1.057304jes Pei, 2017, Nanoscale nucleation and growth of electrodeposited lithium metal, Nano Lett., 17, 1132, 10.1021/acs.nanolett.6b04755