Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Mở rộng lỗ trên nhiều loại thép tấm
Tóm tắt
Việc mở rộng lỗ khoan là một thực hành chế tạo phổ biến và các vấn đề trong các hoạt động này không phải là điều hiếm gặp. Damczyk và Michal trước đây đã phát triển một phương trình cho sự mở rộng tối đa lỗ khoan của thép HSLA, đối với lỗ khoan trong điều kiện đã cắt và sau đó được làm mịn. Bài báo này mở rộng công trình của các tác giả trên. Mười chín loại thép ferritic, thép inox ferritic và thép inox austenitic đã được đánh giá về khả năng mở rộng lỗ khoan bằng cách sử dụng các điều kiện mép lỗ khác nhau. Kết quả cho thấy hành vi của các loại thép có lỗ khoan hoàn thiện rất khác biệt so với các mẫu thử trong điều kiện đã cắt.
Từ khóa
#mở rộng lỗ #thép HSLA #thép ferritic #thép inox #tính chất cơ học kéoTài liệu tham khảo
R.D. Adamczyk, D.W. Dickinson, and K.P. Krupitzer, The Edge Formability of High-Strength Cold-Rolled Steel, 1983, SAE Paper 830237
H. Lawrence and V. Vlack, Correlation of Machinability with Inclusion Characteristics in Resulphurized Bessemer Steels,Trans. ASM, 1953,45, p 741–757
E.J. Paliwoda, The Influence of Chemical Composition on the Machinability of Rephosphorized Open Hearth Screw Steel,Trans. ASM, 1955,47, p 680–691
E.J. Lichy, G.C. Duderstadt and N.L. Samways, Control of Sulfide Shape in Low Carbon Al-Killed Steel,J. Metals, 1965, p 769–775
E.C. Sims and F.W. Boulger, Discussion of Control of Sulfide Shape in Low Carbon Al-Killed Steel,J. Metals, 1965, p 775
L. Luyckx, J.R. Bell, A. McLean, and M. Korchynsky, Sulfide Shape Control in High Strength Low Alloy Steels,Met. Trans., 1970,1, p 3341–3350
R.D. Adamczyk and G.M. Michal, Sheared Edge Extension of High-Strength Cold-Rolled Steels,J. Appl. Metalwork., 1986,4(2), p 157–163
E.G. Dieter,Mechanical Metallurgy, 3rd ed., McGraw-Hill, 1986, p 671–675
W.F. Hosford and R.M. Caddel,Metal Forming: Mechanics and Metallurgy, Prentice-Hall, 1983, p 264–265, 299–302
B. Taylor, Formability Testing of Sheet Metals,Metals Handbook, Vol 14, Forming and Forging, 9th ed., ASM, 1988, p 877–899
D. Bhattacharya and R.S. Patil, Edge Formability Properties of a Hot Rolled HSLA Steel Desulfurized by Various Methods, ASM Paper 8306-085, ASM, 1984, p 429–441
R.G. Davies, Edge Cracking in High Strength Steels,J. Appl. Metalwork., 1983,2(4), p 293–299
Piercing of Low-Carbon Steel,Metals Handbook, 9th ed., Vol. 14, Forming and Forging, ASM, 1988, p 459–471
F.-L. Cheng and D. Aichbhaumik, The Effect of Hot-Dipped Galvanized Coating on the Edge and Plane Strain Formabilities of High Strength Steels,J. Appl. Metalwork., 1986,4(2), p 176–182
K.-I. Sugimoto, K. Nakano, S.-M. Song, and T. Kashima, Retained Austenite Characteristics and Stretch-Flangeability of High-Strength Low-Alloy TRIP Type Bainitic Sheet Steels,ISIJ Int., 2002,42(4), p 450–455
P. Stuart, X. Keeler, and W.G. Brazier, Relationship Between Laboratory Material Characterization and Press-Shop Formability,Micro-Alloying, 1977,75, p 517–530
H.T. Courtney,Mechanical Behavior of Materials, McGraw-Hill, Inc., 1990, p 480
V.F. Zackay, E.R. Parker, J.W. Morris, Jr., and G. Thomas, The Application of Materials Science to the Design of Engineering Alloys: A Review,Mater. Sci. Eng., 1974,16, p 201–221