High precision 3D evaluation method for Vickers hardness measurement

Lewis, 2019, Investigation of the Influence of Rail Hardness on the Wear of Rail and Wheel Materials Under Dry Conditions (Icri Wear Mapping Project), Wear, 430–431, 383, 10.1016/j.wear.2019.05.030 Songmene, 2018, Machining and Machinability of Tool Steels: Effects of Lubrication and Machining Conditions on Tool Wear and Tool Life Data, Procedia CIRP, 77, 505, 10.1016/j.procir.2018.08.252 Tabor, 2000 Broitman, 2017, Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview, Tribology Letters, 65, 23, 10.1007/s11249-016-0805-5 Wu, 2018, Identification of Anisotropic Plasticity Properties of Materials Using Spherical Indentation Imprint Mapping, Materials Science and Engineering: A, 723, 269, 10.1016/j.msea.2018.02.001 Gadermayr, 2011, Algorithms for Microindentation Measurement in Automated Vickers Hardness Testing Antunes, 2006, Three-dimensional Numerical Simulation of Vickers Indentation Tests, International Journal of Solids and Structures, 43, 784, 10.1016/j.ijsolstr.2005.02.048 Sakharova, 2009, Comparison Between Berkovich, Vickers and Conical Indentation Tests: A Three-dimensional Numerical Simulation Study, International Journal of Solids and Structures, 46, 1095, 10.1016/j.ijsolstr.2008.10.032 Ma, 2007, Investigation of Brinell Indentation Diameter From Confocal Microscope Measurement and FEA Modeling, 19 Moona, 2014, Characterization of Rockwell Hardness Indenter Tip Using Image Processing and Optical Profiler and Evaluation of Measurement Uncertainty, International Journal of Metrology and Quality Engineering, 5, 406, 10.1051/ijmqe/2014020 ISO 6507-1:2018 Metallic materials – Vickers hardness test -Part 1: Test method. ISO 6507-3 Metallic materials – Vickers hardness test - Part 3. Calibration of reference blocks. BIPM, IEC, IFCC, ISO, IUPAC, OIML, Guide to the Expression of Uncertainty in Measurement, International Organisation for Standardisation, Geneva, Switzerland, ISBN 92-67-10188-9, First Edition, 1993. [This Guide is often referred to as the GUM or the ISO TAG4 document after the ISO Technical Advisory Group that drafted it]. Guidelines on the Estimation of Uncertainty in Hardness Measurements, EURAMET cg-16, Version 2.0 (03/2011), Previously EA-10/16.