High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions

Baltar de Souza Leão, 2019, Carbon accounting approaches and reporting gaps in urban emissions: an analysis of the Greenhouse Gas inventories and climate action plans in Brazilian cities, J. Clean. Prod. Tarigan, 2019, Expectations, attitudes, and preferences regarding support and purchase of eco-friendly fuel vehicles, J. Clean. Prod., 10.1016/j.jclepro.2019.04.190 Del Pero, 2017, The effect of lightweighting in automotive LCA perspective: Estimation of mass-induced fuel consumption reduction for gasoline turbocharged vehicles, J. Clean. Prod., 10.1016/j.jclepro.2017.04.013 Fan, 2016, An introduction to lightweight composite materials and their use in transport structures Dasgupta, 2019, Gradient platform for combinatorial screening of thermoset polymers for biomedical applications, Mater. Sci. Eng. C, 10.1016/j.msec.2018.10.023 Supian, 2018 Raman Bharath, 2015, Kenaf fibre reinforced composites: a review, ARPN Journal of Engineering and Applied Sciences Alkbir, 2016, Fibre properties and crashworthiness parameters of natural fibre-reinforced composite structure: a literature review, Compos. Struct., 10.1016/j.compstruct.2016.01.098 Polanský, 2014, Determination of the thermal endurance of PCB FR4 epoxy laminates via thermal analyses, Polym. Degrad. Stabil., 10.1016/j.polymdegradstab.2014.03.043 Lobanov, 2019, The fatigue durability GFRP under increased temperatures, Procedia Structural Integrity, 10.1016/j.prostr.2019.08.087 Jafari, 2019, Effect of fibers configuration and thickness on tensile behavior of GFRP laminates subjected to elevated temperatures, Construct. Build. Mater., 10.1016/j.conbuildmat.2019.01.003 Gliszczynski, 2019, The response of laminated composite plates and profiles under low-velocity impact load, Compos. Struct., 10.1016/j.compstruct.2018.09.005 Li, 2015, Correlation of acoustic emission with optically observed damage in a glass/epoxy woven laminate under tensile loading, Compos. Struct. Chen, 2017, Quasi-static and dynamic tensile properties of fiberglass/epoxy laminate sheet, Construct. Build. Mater. Shivamurthy, 2013, Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites, Mater. Des., 10.1016/j.matdes.2012.07.059 Lampani, 2018, Analysis of damage in composite laminates with embedded piezoelectric patches subjected to bending action, Compos. Struct., 10.1016/j.compstruct.2018.04.073 Lomakin, 2018, Nonlinear deformation and failure analysis of laminated composites Tatariants, 2018, Recovery of gold, other metallic and non-metallic components of full-size waste random access memory, J. Clean. Prod., 10.1016/j.jclepro.2017.11.132 Yousef, 2018, Recycling of bare waste printed circuit boards as received using an organic solvent technique at a low temperature, J. Clean. Prod., 10.1016/j.jclepro.2018.03.227 Tatariants, 2018, Separation and purification of metal and fiberglass extracted from waste printed circuit boards using milling and dissolution techniques Yousef, 2018, Mechanical and thermal characterizations of non-metallic components recycled from waste printed circuit boards, J. Clean. Prod. Tatariants, 2017, Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures, RSC Adv., 10.1039/C7RA07034A Devnani, 2019, Effect of nanofillers on the properties of natural fiber reinforced polymer composites, Mater. Today: Mater. Today. Proc. Kiran, 2018, Evaluation of mechanical properties of glass fiber reinforced epoxy polymer composites with alumina, titanium dioxide and silicon carbide Kiran, 2018, Review-effect of fillers on mechanical properties of polymer matrix composites Sharma, 2018, Enhanced thermomechanical and electrical properties of multiwalled carbon nanotube paper reinforced epoxy laminar composites, Compos. Appl. Sci. Manuf., 10.1016/j.compositesa.2017.10.023 Kelkar, 2016, Boron nitride nanoparticle enhanced prepregs: a novel route for manufacturing aerospace structural composite laminate, Mater. Chem. Phys., 10.1016/j.matchemphys.2016.03.044 Seretis, 2017, On the graphene nanoplatelets reinforcement of hand lay-up glass fabric/epoxy laminated composites, Compos. B Eng., 10.1016/j.compositesb.2017.03.015 Longitudinal and Transverse Compressive Properties of Alumina Nanoparticles Filled Epoxy/unidirectional Glass Fiber Composite Laminate under In-Plane Loading. Nayak, 2019, Influence of seawater aging on mechanical properties of nano-Al2O3 embedded glass fiber reinforced polymer nanocomposites, Construct. Build. Mater., 10.1016/j.conbuildmat.2019.06.043 Nayak, 2018, Influence of seawater absorption on retention of mechanical properties of nano-TiO2 embedded glass fiber reinforced epoxy polymer matrix composites, Archives of Civil and Mechanical Engineering, 10.1016/j.acme.2018.07.002 Deep, 2018, Effect of nano and macro carbon fillers on flexural properties of glass fiber/epoxy composite laminates, IOP Conf. Ser. Mater. Sci. Eng., 10.1088/1757-899X/455/1/012007 Dalina, 2016, Properties of fiberglass/MWCNT buckypaper/epoxy laminated composites, Procedia Chemistry, 10.1016/j.proche.2016.03.138 Aly, 2018, In-situ monitoring of woven glass fiber reinforced composites under flexural loading through embedded aligned carbon nanotube sheets, J. Compos. Mater., 10.1177/0021998317754128 Musthak, 2017, Study on effects of E-glass fiber hybrid composites enhanced with multi-walled carbon nanotubes under tensile load using full factorial design of experiments, Appl. Nanosci. Sharma, 2018, Enhanced thermomechanical and electrical properties of multiwalled carbon nanotube paper reinforced epoxy laminar composites, Compos. Appl. Sci. Manuf., 10.1016/j.compositesa.2017.10.023 Ranjbar, 2019, Mechanical and low-velocity impact properties of epoxy-composite beams reinforced by MWCNTs, J. Compos. Mater., 10.1177/0021998318790049 Han, 2019, Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis, Compos. Appl. Sci. Manuf., 10.1016/j.compositesa.2019.02.027 Yousef, 2013, Effects of increasing electrodes on CNTs yield synthesized by using arc-discharge technique, J. Nanomater., 10.1155/2013/392126 Yoonessi, 2014, Carbon nanotube epoxy nanocomposites: the effects of interfacial modifications on the dynamic mechanical properties of the nanocomposites, ACS Appl. Mater. Interfaces, 10.1021/am5056849 Khare, 2014, Effect of carbon nanotube functionalization on mechanical and thermal properties of cross-linked epoxy-carbon nanotube nanocomposites: Role of strengthening the interfacial interactions, ACS Appl. Mater. Interfaces, 10.1021/am405317x Salam, 2013, Improvement in mechanical and thermo-mechanical properties of epoxy composite using two different functionalized multi-walled carbon nanotubes, Open J. Compos. Mater., 10.4236/ojcm.2013.32A001 Chen, 2008, Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes, Mater. Sci. Eng., 10.1016/j.msea.2008.04.044 Meier, 2016, Evaluating vibration assisted vacuum infusion processing of hexagonal boron nitride sheet modified carbon fabric/epoxy composites in terms of interlaminar shear strength and void content, Compos. Sci. Technol., 10.1016/j.compscitech.2016.03.022 Panchagnula, 2019, Improvement in the mechanical properties of neat GFRPs with multi-walled CNTs, Journal of Materials Research and Technology, 10.1016/j.jmrt.2018.02.009 Yousef, 2016, Mass production of CNTs using CVD multi-quartz tubes, J. Mech. Sci. Technol., 10.1007/s12206-016-1031-7 Mohamed, 2017, Photocatalytic degradation of organic dyes and enhanced mechanical properties of PAN/CNTs composite nanofibers, Separ. Purif. Technol., 10.1016/j.seppur.2017.03.051 Seretis, 2018, Effect of sonication on the mechanical response of graphene nanoplatelets/glass fabric/epoxy laminated nanocomposites, Compos. B Eng., 10.1016/j.compositesb.2018.04.034 Turner, 2015, Greenhouse gas emission factors for recycling of source-segregated waste materials, Resour. Conserv. Recycl., 10.1016/j.resconrec.2015.10.026 Yousef, 2020, Sustainable green technology for recovery of cotton fibers and polyester from textile waste, J. Clean. Prod., 10.1016/j.jclepro.2020.120078 Yousef, 2019, Sustainable technology for mass production of Ag nanoparticles and Al microparticles from damaged solar cell wafers, Waste Manag., 10.1016/j.wasman.2019.08.019 Yousef, 2019, A sustainable bioenergy conversion strategy for textile waste with self-catalysts using mini-pyrolysis plant, Energy Convers. Manag., 10.1016/j.enconman.2019.06.050 Yousef, 2016, Polymer nanocomposite components: a case study on gears Wang, 2017, Efficient surface modification of carbon nanotubes for fabricating high performance CNT based hybrid nanostructures, Carbon Roy, 2018, Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites, Nanotechnol. Rev., 10.1515/ntrev-2018-0068 Yousef, 2015, Wear characterization of carbon nanotubes reinforced acetal spur, helical, bevel and worm gears using a TS universal test rig, JOM, 10.1007/s11837-014-1268-5 Yousef, 2016, Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil, Polym. Adv. Technol., 10.1002/pat.3801 Liu, 2017, Characterization of enhanced interfacial bonding between epoxy and plasma functionalized carbon nanotube films, Compos. Sci. Technol. Tanabi, 2019, Effect of CNTs dispersion on electrical, mechanical and strain sensing properties of CNT/epoxy nanocomposites, Results in Physics, 10.1016/j.rinp.2018.11.081 Godara, 2009, Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites, Carbon, 10.1016/j.carbon.2009.06.039 Gliszczynski, 2019, The response of laminated composite plates and profiles under low-velocity impact load, Compos. Struct., 10.1016/j.compstruct.2018.09.005 Mishra, 2010, Failure initiation in composite structures under low-velocity impact: Analytical studies, Compos. Struct., 10.1016/j.compstruct.2009.08.024 Ferreira, 2015, Impact response of nano reinforced mat glass/epoxy laminates, Fibers Polym., 10.1007/s12221-015-0173-z Sadykov, 2017, Hybrid woven glass fibre fabric-multi-walled carbon nanotube-epoxy composites under low rate impact, Journal of Composites Science, 10.3390/jcs1010010 Kobzev, 2018, Structural and functional properties of composites with carbon nanotubes for space applications Li, 2019, Interlaminar properties of GFRP laminates toughened by CNTs buckypaper interlayer, Compos. Struct. Ranjbar, 2019, Mechanical and low-velocity impact properties of epoxy-composite beams reinforced by MWCNTs, J. Compos. Mater., 10.1177/0021998318790049 Tatariants, 2017, Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures, RSC Adv., 10.1039/C7RA07034A Fredi, 2018, Multifunctional epoxy/carbon fiber laminates for thermal energy storage and release, Compos. Sci. Technol., 10.1016/j.compscitech.2018.02.005