High-impact strength acrylic denture base material processed by autoclave

Sideridou, 2011 Jagger, 2002, An investigation into the transverse and impact strength of high strength denture base acrylic resins, J Oral Rehabil, 29, 263, 10.1046/j.1365-2842.2002.00830.x Powers, 2012 Mang, 2005, Physical properties of four acrylic denture base resins, J Contemp Dent Pract, 15, 93, 10.5005/jcdp-6-4-93 McCabe, 2008 Powers, 2008 Azzari, 2003, Effect of the curing conditions on the properties of an acrylic denture base resin microwave polymerized, J Dent, 31, 463, 10.1016/S0300-5712(03)00090-3 Banerjee, 2010, Influence of the processing technique on the flexural fatigue strength of denture base resins: an in vitro investigation, Indian Dent Assoc, 21, 391, 10.4103/0970-9290.70810 Undurwade, 1989, Curing acrylic resin in a domestic pressure cooker: a study of residual monomer content, Quintessence Int, 20, 123 Durkan, 2008, In vitro, comparison of autoclave polymerization on the transverse strength of denture base resins, Dent Mater J, 27, 640, 10.4012/dmj.27.640 Abdulwahhab, 2012, The effect of autoclave processing on some properties of heat cured denture base material, J Bagh Coll Dent, 24, 13 1999 ISO 179-1, 2000 Rodrigues Garcia, 1996, Accuracy and porosity of denture bases submitted to two polymerization cycles, Indian J Dent Res, 7, 122 Al-Fahdawi, 2009, The effect of the poly vinyl pyrrolidone (PVP) addition on some properties of heat-cured acrylic resin denture base material, J Bagh Coll Dent, 21, 1 Judelson, 2004, Operation of the autoclaves Oyawale, 2007, Design and construction of an autoclave, Pac J Sci Technol, 8, 224 Anusavice, 2007 Monson, 1988, The pressure cooker as a steam sterilizer, Trop Doct, 18, 159, 10.1177/004947558801800406 Powers, 2006 O‘Brien, 2002 Stafford, 1980, A review of the properties of some denture base polymers, J Dent, 8, 292, 10.1016/0300-5712(80)90043-3 Nicholson, 1997 Unalan, 2007, Effects of mica and glass on surface hardness of acrylic tooth material, Dent Mater J, 26, 545, 10.4012/dmj.26.545 Jagger, 1978, Effect of curing cycle on some properties of PMMA denture base materials, J Oral Rehabil, 5, 151, 10.1111/j.1365-2842.1978.tb01208.x Yannikakis, 2002, Andreopoulos evaluation of porosity in microwave-processed acrylic resin using a photographic method, J Prosthet Dent, 87, 613, 10.1067/mpr.2002.124490 Reitz, 1985, The curing of denture acrylic resins by microwave energy: physical properties, Quintessence Int, 16, 547 Wolfaardt, 1986, The occurrence of porosity in a heat-cured poly(methyl methacrylate) denture base resin, J Prosthet Dent, 55, 393, 10.1016/0022-3913(86)90128-9 Noort, 2008