Guide blades’ feasibility evaluation and its contribution to performance of a micro-wind turbine resembling lotus in shape

Kaabeche, 2011, Sizing optimization of grid-independent hybrid photovoltaic/wind power generation system, Energy, 36, 1214, 10.1016/j.energy.2010.11.024 Saeidi, 2012, Aerodynamic design and economical evaluation of site specific small vertical axis wind turbines, Applied Energy, 88, 4067 Akwa, 2012, A review on the performance of Savonius wind turbines, Renewable and Sustainable Energy Reviews, 16, 3054, 10.1016/j.rser.2012.02.056 Wang, 2013, 3-Dimensional CFD simulation and analysis on performance of a micro-wind turbine resembling lotus in shape, Energy and Buildings, 65, 66, 10.1016/j.enbuild.2013.05.045 Balduzzi, 2012, Feasibility analysis of a Darrieus vertical-axis turbine installation in the rooftop of a building, Applied Energy, 97, 921, 10.1016/j.apenergy.2011.12.008 Weng, 2000, Guidelines for airflow over complex terrain model developments, Journal Wind Engineering and Industrial Aerodynamics, 86, 169, 10.1016/S0167-6105(00)00009-X Lemelin, 1988, Simple approximations for wind speed-up over hills, Journal Wind Engineering and Aerodynamics, 28, 117, 10.1016/0167-6105(88)90108-0 Gong, 1989, A wind tunnel study of turbulent flow over model hills, Boundary-Layer Meteorology, 49, 113, 10.1007/BF00116408 Walker, 2011, Building mounted wind turbines and their suitability for the urban scale—a review of methods of estimating urban wind resource, Energy and Buildings, 43, 1852, 10.1016/j.enbuild.2011.03.032 Mertens, 2003, Performance of an H-Darrieus in the skewed flow on a roof, Journal of Solar Energy Engineering, 125, 433, 10.1115/1.1629309 Beccali, 2008, Short-term prediction of household electricity consumption: assessing weather sensitivity in a Mediterranean area, Renewable and Sustainable Energy Reviews, 12, 2040, 10.1016/j.rser.2007.04.010 Kwak, 2013, Feasibility study on a novel methodology for short-term real-time energy demand prediction using weather forecasting data, Energy and Buildings, 57, 250, 10.1016/j.enbuild.2012.10.041 Cellura, 2008, Wind speed spatial estimation for energy planning in Sicily: introduction and statistical analysis, Renewable Energy, 33, 1237, 10.1016/j.renene.2007.08.012 Beccali, 2004, Forecasting daily urban electric load profiles using artificial neural networks, Energy Conversion and Management, 45, 2879, 10.1016/j.enconman.2004.01.006 Cellura, 2008, Wind speed spatial estimation for energy planning in Sicily: a neural kriging application, Renewable Energy, 33, 1251, 10.1016/j.renene.2007.08.013 Irabu, 2007, Characteristics of wind power on Savonius rotor using a guide-box tunnel, Experimental Thermal and Fluid Science, 32, 580, 10.1016/j.expthermflusci.2007.06.008 Golecha, 2011, Influence of the deflector plate on the performance of modified Savonius water turbine, Applied Energy, 88, 3207, 10.1016/j.apenergy.2011.03.025 Altan, 2008, An experimental study on improvement of a Savonius rotor performance with curtaining, Experimental Thermal and Fluid Science, 32, 1673, 10.1016/j.expthermflusci.2008.06.006 Nikolakakis, 2011, The optimum mix of electricity from wind and solar-sources in conventional power systems: evaluating the case for New York state, Energy Policy, 39, 6972, 10.1016/j.enpol.2011.05.052 Hoicha, 2011, Solar and wind resource complementarity: advancing options for renewable electricity integration in Ontario, Canada, Renewable Energy, 36, 97, 10.1016/j.renene.2010.06.004 Esteban, 2010, Methodology to estimate the output of a dual solar-wind renewable energy system in Japan, Energy Policy, 38, 7793, 10.1016/j.enpol.2010.08.039 Bekele, 2010, Feasibility study for a standalone solar-wind-based hybrid energy system for application in Ethiopia, Applied Energy, 79, 487, 10.1016/j.apenergy.2009.06.006 Zhou, 2010, Current status of research on optimum sizing of stand-alone hybrid solar-wind power generation systems, Applied Energy, 87, 380, 10.1016/j.apenergy.2009.08.012 Kaabeche, 2011, Techno-economic valuation and optimization of integrated photovoltaic/wind energy conversion system, Solar Energy, 85, 2407, 10.1016/j.solener.2011.06.032 Smith, 2007, Bahrain World Trade Center (BWTC): the first large-scale integration of wind turbines in a building, Structural Design of Tall and Special Buildings, 16, 429, 10.1002/tal.416 Nema, 2009, A current and future state of art development of hybrid energy system using wind and PV-solar: a review, Renewable and Sustainable Energy Reviews, 13, 2096, 10.1016/j.rser.2008.10.006 Chong, 2012, Early development of an innovative building integrated wind, solar and rain water harvester for urban high rise application, Energy and Buildings, 47, 201, 10.1016/j.enbuild.2011.11.041 Li, 2011, Preliminary investigation of a novel solar and wind energy extraction system, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226, 73 Gholamalizadeh, 2013, A comprehensive approach to design and improve a solar chimney power plant: a special case-Kerman project, Applied Energy, 102, 975, 10.1016/j.apenergy.2012.06.012 Mithraratne, 2009, Roof-top wind turbines for micro-generation in urban houses in New Zealand, Energy and Buildings, 41, 1013, 10.1016/j.enbuild.2009.05.003 Sharpe, 2010, Crossflex: concept and early development of a true building integrated wind turbine, Energy and Buildings, 42, 2365, 10.1016/j.enbuild.2010.07.032 Saha, 2008, Optimum design configuration of Savonius rotor through wind tunnel experiments, Journal Wind Engineering and Aerodynamics, 96, 1359, 10.1016/j.jweia.2008.03.005 Alexander, 1978, Wind tunnel tests on a Savonius rotor, Journal Wind Engineering and Aerodynamics, 3, 343, 10.1016/0167-6105(78)90037-5 Saha, 2006, On the performance analysis of Savonius rotor with twisted blades, Renewable Energy, 31, 1776, 10.1016/j.renene.2005.08.030 Ahmed, 2013, A novel small scale efficient wind turbine for power generation, Renewable Energy, 57, 79, 10.1016/j.renene.2013.01.023