Grinding of metals: Theory and application

G.I. Alden:Trans. ASME, Paper No. 1446, 1914, pp. 451–460.

A. H. Dall:Modern Machine Shop, 1939.

H. Ernst:Machining-Theory and Practice, pp. 1–4, American Society for Metals, Metals Park, OH, 1950.

L. P. Tarosov:Machining-Theory and Practice, pp. 409–464, American Society for Metals, Metals Park, OH, 1950.

E.D. Doyle and S.K. Dean:Annals of the CIRP, 1980, vol. 29, no. 2, p. 571.

E. D. Doyle and R. L. Aghan:Metall. Trans. B, 1975, vol. 6B, p. 143.

S. Malkin:Proceedings of the Ninth North American Manufacturing Research Conference, SME, 1981, pp. 235–239.

G.W. Rowe and A.G. Wetton:J. Inst. Met., 1969, vol. 97, pp. 193–200.

G.S. Reichenbach, M.C. Shaw, J. E. Mayer, Jr., and S. Kalpakcioglu:Trans. ASME, 1976, vol. 78, pp. 847–859.

R. Snoeys:Annals of the CIRP, 1972, vol. 21, p. 183.

R. Snoeys, J. Peters, and A. Decneut:Annals of the CIRP, 1974, vol. 21, no. 2, p. 227.

G. Werner: Doctoral dissertation, T. H. Aachen, 1971.

G. Werner:Annals of the CIRP, 1978, vol. 27, p. 243.

T. Sasaki and K. Okamura:Memoirs of Faculty, Kyoto University, October 1959, p. 367.

J. Peklenik:Proceedings of the International Conference on Production Engineering, Part 2, JSPE, Tokyo, Japan, 1974, p. 51.

S.M. Pandit and S.M. Wu:J. Eng. Ind. (Trans. ASME), 1973, vol. 95, p. 821.

C. M. Stralkowski, S. M. Wu, and R. E. DeVor:Int. J. Mach. Tool Des. Res., 1969, vol. 9, p. 145.

S.S. Law, S.M. Wu, and A.M. Joglekar:J. Eng. Ind. (Trans. ASME), 1973, vol. 95, p. 983.

H. Yoshikawa and T. Sate:Annals of the CIRP, 1968, vol. 16, p. 297.

R. M. Baul and R. Shilton:Proceedings of the Eighth International Machine Tool Design and Research Conference, Part 2, 1967, p. 923.

W. König and K. Steffens:Annals of the CIRP, 1982, vol. 31, p. 201.

H. Yoshikawa and J. Peklenik:Annals of the CIRP, 1970, vol. 18, p. 361.

E. R. Marshall and M. C. Shaw:Trans. ASME, 1952, vol. 74, p. 51.

W. R. Backer, E. R. Marshall, and M. C. Shaw:Trans. ASME, 1952, vol. 74, p. 51.

M. E. Merchant:J. Appl. Phys., 1945, vol. 16, p. 207.

B.F. von Turkovich:J. Eng. Ind. (Trans. ASME), 1970, vol. 94, p. 151.

S. Malkin:Proceedings of the Third North American Metalworking Research Conference, Carnegie Press, May 1976, p. 453.

S. Malkin and N. Joseph:Wear, 1975, vol. 32, p. 11.

S. Malkin and N. H. Cook:J. Eng. Ind. (Trans. ASME), 1971, vol. 93, p. 1129.

A. M. Beseuyen and J. Verkerk:Annals of the CIRP, 1971, vol. 20, p. 65.

R.P. Lindsay:J. Eng. Ind. (Trans. ASME), 1970, vol. 92, p. 683.

T. Murray and S. Malkin:J. Eng. Ind. (Trans. ASME), 1978, vol. 100, p. 95.

S. Malkin and T. Murray:Proceedings of the Fifth North American Metalworking Research Conference, SME, 1977, p. 278.

M. Foerster and S. Malkin:Proceedings of the Second North American Metalworking Research Conference, SME, May 1974, p. 601.

H. Tsuwa and S. Kawamura:Bull. Jpn. Soc. Precis. Eng., 1966, vol. 2, p. 40.

J. A. Kirk:J. Eng. Ind. (Trans. ASME), 1967, vol. 98, p. 189.

R. Komanduri:Annals of the CIRP, 1976, vol. 25, no. 1, p. 191.

J. Verkerk:Annals of the CIRP, 1977, vol. 26, no. 1, p. 127.

L. Coes:Ind. Eng. Chem., 1955, vol. 47, p. 2493.

L. Coes:Abrasives, Springer Verlag, 1971.

G.J. Goepfert and J.L. Williams:Mech. Eng., ASME, 1969, vol. 81, no. 4, p. 69.

N. S. Eiss and R. C. Fabiniak:J. Amer. Ceram. Soc., 1966, vol. 49, p. 221.

R. E. Schofield and S. J. Hollands:Proceedings of the International Conference on Production Engineering, Part 1, JSPE, Tokyo, Japan, 1971, p. 677.

S. Yossifon and C. Rubenstein:Int. J. Mach. Tool Des. Res., 1982, vol. 22, p. 159.

H. Yoshikawa:Annals of the CIRP, 1966, vol. 14, p. 347.

S. Malkin and N.H. Cook:J. Eng. Ind. (Trans. ASME), 1971, vol. 93, p. 1134.

R.S. Hahn and R. Lindsay:Annals of the CIRP, 1967, vol. 15, p. 197.

S. Malkin:J. Eng. Ind. (Trans. ASME), 1976, vol. 98, p. 56.

S. Kannappan and S. Malkin:J. Eng. Ind. (Trans. ASME), 1972, vol. 94, p. 833.

T. Shonozaki and H. Shigematu:Bull. Jpn. Soc. Precis. Eng., 1966, vol. 2, p. 8.

N. Takenaka:Annals of the CIRP, 1966, vol. 13, p. 183.

K. Okamura and T. Nakajima: “New Developments in Grinding,”Proceedings of the International Grinding Conference, Carnegie Press, 1972, p. 305.

R. S. Hahn:Proceedings of the International Machine Tool Design and Research Conference, 1963, p. 129.

A. J. Sedriks and T.O. Mulhearn:Wear, 1963, vol. 6, p. 457.

T.O. Mulhearn and L.E. Samuels:Wear, 1962, vol. 5, p. 478.

L. E. Samuels:Metallographic Polishing by Mechanical Methods, 3rd ed., Chap. 3, ASM, 1982.

D. L. Thompson and S. Malkin:Proceedings of the International Conference on Production Engineering, Part 1, JSPE, Tokyo, Japan, 1974, p. 727.

S. Malkin:Annals of the CIRP, 1979, vol. 28, p. 209.

R. Snoeys, M. Maris, and J. Peters:Annals of the CIRP, 1978, vol. 27, no. 2, p. 571.

A. A. Torrance:Proceedings of the 19th International Machine Tool Design and Research Conference, 1978, p. 637.

W. E. Littman and J. Wulff:Trans. ASM, 1955, vol. 47, p. 692.

A.G. Wetton:J. Mech. Eng. Sci., 1969, vol. 11, no. 4, p. 412.

M. Maris and R. Snoeys:Proceedings of the 14th International Machine Tool Design and Research Conference, Paper 604, 1973.

J. O. Outwater and M. C. Shaw:Trans. ASME, 1952, vol. 75, p. 73.

T. N. Loladze, G. V. Bokuchava, and A. M. Siradze:Proceedings of the International Conference on Production Engineering, Part 1, JSPE, Tokyo, Japan, 1974, p. 713.

S. Malkin:J. Eng. Ind. (Trans. ASME), 1974, vol. 96, p. 1184.

S. Malkin:Annals of the CIRP, 1978, vol. 27, p. 233.

N. R. Des Ruisseaux and R. D. Zerkle:J. Eng. Ind. (Trans. ASME), 1970, vol. 92, p. 428.

J. C. Jaeger:Proceedings of the Royal Society N.S.W., 1942, vol. 76, p. 263.

K. Sato:Bull. Jpn. Soc. Grind. Eng., 1961, vol. 1, p. 31.

S. Malkin and R.B. Anderson:J. Eng. Ind. (Trans. ASME), 1974, vol. 96, p. 1177.

K. Takazawa:Bull. Jpn. Soc. Precis. Eng., 1966, vol. 2, no. 1, p. 14.

J.H. Hollomon and J.D. Jaffee: AIME Technical Publication 1831, February 1945.

N. R. Des Ruisseaux and R. D. Zerkle:J. Heat Trans. (Trans. ASME), 1970, vol. 92, p. 456.

D. G. Lee, R. D. Zerkle, and N. R. Des Ruisseaux:J. Eng. Ind. (Trans. ASME), 1972, vol. 94, p. 1206.

W. E. Littman:Proceedings of the International Conference, Manufacturing Technology, ASTME, 1967, p. 1303.

W. E. Littman: ASTME Paper No. MR67-593, 1967.

Grinding Stresses, Cause, Effect, and Control, Collected Papers, Grinding Wheel Institute, Cleveland, OH, 1960.

M. Wakabayashi and M. Nakayama:Bull. Jpn. Soc. Precis. Eng., 1979, vol. 13, no. 2, p. 75.

R. S. Hahn:Annals of the CIRP, 1976, vol. 25, p. 203.

S.O. A. El-Helieby and G.W. Rowe:Wear, 1980, vol. 58, p. 155.

A. Mishra, U. R. K. Rao, and R. Natarajan:Proceedings of the International Conference on Production Engineering, Institute of Mechanical Engineers (India) and CIRP, New Delhi, India, 1977, p. VI-40.

N. Skalli, A. Turbat, and J. F. Flavenot:Annals of the CIRP, 1982, vol. 31, p. 451.

R. Snoeys, J. Peters, and A. Decneut:Annals of the CIRP, 1974, vol. 23, pp. 227–237.

T. Murray and S. Malkin:J. Eng. Ind. (Trans. ASME), 1978, vol. 100, pp. 297–302.

S. Malkin and T. Murray:Proceedings of the Fifth North American Metalworking Research Conference, SME, May 1977, p. 278.

R. Snoeys and M. Maris:Proceedings of the International Conference on Production Engineering, Part 2, JSPE, Tokyo, Japan, 1974, p. 70.

R. Snoeys and D. Brown:Proceedings of the 10th International Machine Tool Design and Research Conference, 1969, p. 325.

B. Bartalucci and G.G. Lisini:J. Eng. Ind. (Trans. ASME), 1969, vol. 91, p. 1139.

S. Shiozaki, M. Miyashita, and Y. Furukawa:Bull. Jpn. Soc. Mech. Eng., 1970, vol. 13, no. 63, p. 3.

R. A. Thompson:J. Eng. Ind. (Trans. ASME), 1974, vol. 96, p. 275.

R. S. Hahn:J. Eng. Ind. (Trans. ASME), 1964, vol. 96, p. 287.

R. S. Hahn and R. P. Lindsay: “Principles of Grinding,” 5-part series inMachinery Magazine, New York, 1971.

R. P. Lindsay: SME Paper No. MR75–604, 1975.

G. Amitay, S. Malkin, and Y. Koren:J. Eng. Ind. (Trans. ASME), 1981, vol. 103, pp. 103–108.

K. Iwata, K. Takazawa, Y. Yamamoto, and M. Horike:Proceedings of the Fifth North American Metalworking Research Conference, SME, May 1977, p. 284.

S. Malkin and Y. Koren:Annals of the CIRP, 1980, vol. 29, p. 213.

S. Malkin:Annals of the CIRP, 1981, vol. 30, p. 223.