Green supplier’s selection using economic and environmental criteria in medical industry
Springer Science and Business Media LLC - Trang 1-22 - 2022
Tóm tắt
The Green Supplier’s Selection (GSS) approach was used in this paper. This approach is focused on environmental and economic criteria when selecting suppliers. This enables the growing demands of different stakeholders to be met. The GSS approach was conducted on the example of the Ghetaldus Brčko Polyclinic with the application of expert decision-making. During the GSS, it is crucial for Ghetaldus Brčko Polyclinic to obtain materials and services that are not harmful to the environment, thus reducing the environmental pollution. The experts assessed the importance of the criteria used and the importance of the observed suppliers. The fuzzy PIPRECIA (Pivot Pairwise Relative Criteria Importance Assessment) method was used to determine the importance of the criteria, while the fuzzy ARAS (Additive Ratio Assessment) method was used to rank suppliers. The results have shown that the most important sub-criteria for experts is the green product and quality when choosing a supplier, and supplier A4 best meets the goals set by the Ghetaldus Brčko Polyclinic. These results were confirmed through the evaluation of the results and by the application of sensitivity analysis. The contribution and importance of this study to provide the methodology that will enable the selection of green suppliers who will provide equipment and materials that are not environmentally harmful and thus the environment is protected because the green supplier cares about environmental protection. The research approach has shown great flexibility because it is adapted to human thinking; thus, it should be used in future studies.
Tài liệu tham khảo
Abdullah, L., Chan, W., & Afshari, A. (2019). Application of PROMETHEE method for green supplier selection: A comparative result based on preference functions. Journal of Industrial Engineering International., 15, 271–285. https://doi.org/10.1007/s40092-018-0289-z
AdeelJafar, R., Shabbir, A., & Kousar, F. (2021). Impact of green practices on buying habits in Pakistan’s food sector. Economics Innovative and Economic Research, 7(2), 19–30. https://doi.org/10.2478/eoik-2019-0012
Ayub, S., Shabir, M., Riaz, M., Mahmood, W., Bozanić, D., & Marinković, D. (2022). Linear diophantine fuzzy rough sets: A new rough set approach with decision making. Symmetry, 14(3), 525. https://doi.org/10.3390/sym14030525
Bakeshlou, E. A., Khamseh, A. A., Asl, M. A. G., Sadeghi, J., & Abbaszadeh, M. (2017). Evaluating a green supplier selection problem using a hybrid MODM algorithm. Journal of Intelligent Manufacturing, 28(4), 913–927. https://doi.org/10.1007/s10845-014-1028-y
Banaeian, N., Mobli, H., Fahimnia, B., Nielsen, I. E., & Omid, M. (2018). Green supplier selection using fuzzy group decision making methods: A case study from the agri-food industry. Computers & Operations Research, 89, 337–347. https://doi.org/10.1016/j.cor.2016.02.015
Božanić, D., Pamučar, D., & Bojanić, D. (2015). Modification of the analytic hierarchy proces (AHP) method using fuzzy logic: Fuzzy AHP approach as a support to the decision making process concerning engagement of the group for additional hindering. Serbian Journal of Management, 10(2), 151–171. https://doi.org/10.5937/sjm10-7223
Çalık, A. (2021). A novel Pythagorean fuzzy AHP and fuzzy TOPSIS methodology for green supplier selection in the Industry 4.0 era. Soft Computing, 25, 2253–2265. https://doi.org/10.1007/s00500-020-05294-9
Đalić, I., Stević, Ž, Karamasa, C., & Puška, A. (2020). A novel integrated fuzzy PIPRECIA: Interval rough SAW model—Green supplier selection. Decision Making: Applications in Management and Engineering, 3(1), 126–145. https://doi.org/10.31181/dmame2003114d
Dickson, G. W. (1966). An analysis of vendor selection systems and decisions. Journal of Purchasing, 2(1), 5–17. https://doi.org/10.1111/j.1745-493X.1966.tb00818.x
Dobos, I., & Vörösmarty, G. (2019). Inventory-related costs in green supplier selection problems with data envelopment analysis (DEA). International Journal of Production Economics, 209, 374–380. https://doi.org/10.1016/j.ijpe.2018.03.022
Ecer, F. (2022). Multi-criteria decision making for green supplier selection using interval type-2 fuzzy AHP: A case study of a home appliance manufacturer. Operational Research, 22, 199–233. https://doi.org/10.1007/s12351-020-00552-y
Freeman, J., & Chen, T. (2015). Green supplier selection using an AHP-entropy-TOPSIS framework. Supply Chain Management: An International Journal, 20(3), 327–340. https://doi.org/10.1108/scm-04-2014-0142
Gao, H., Ju, Y., Santibanez Gonzalez, E. D. R., & Zhang, W. (2019). Green supplier selection in electronics manufacturing: An approach based on consensus decision making. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.118781
Gupta, S., Soni, U., & Kumar, G. (2019). Green supplier selection using multi-criterion decision making under fuzzy environment: A case study in automotive industry. Computers & Industrial Engineering., 136, 663–680. https://doi.org/10.1016/j.cie.2019.07.038
Halkos, G. E. (2003). Environmental Kuznets curve for sulfur: Evidence using GMM estimation and random coefficient panel data models. Environment and Development Economics, 8(04), 581–601. https://doi.org/10.1017/s1355770x0300317
Halkos, G. E. (2013). Exploring the economy: Environment relationship in the case of sulphur emissions. Journal of Environmental Planning and Management, 56(2), 159–177. https://doi.org/10.1080/09640568.2012.657756
Halkos, G., Moll de Alba, J., & Todorov, V. (2021). Economies’ inclusive and green industrial performance: An evidence based proposed index. Journal of Cleaner Production, 279, 123516. https://doi.org/10.1016/j.jclepro.2020.123516
Hashemi, S. H., Karimi, A., & Tavana, M. (2015). An integrated green supplier selection approach with analytic network process and improved Grey relational analysis. International Journal of Production Economics, 159, 178–191. https://doi.org/10.1016/j.ijpe.2014.09.027
Javad, M. O. M., Darvishi, M., & Javad, A. O. M. (2020). Green Supplier selection for the steel industry using BWM and fuzzy TOPSIS: A case study of Khouzestan steel company. Sustainable Futures, 2, 100012. https://doi.org/10.1016/j.sftr.2020.100012
Jokić, Ž, Božanić, D., & Pamučar, D. (2021). Selection of fire position of mortar units using LBWA and fuzzy MABAC model. Operational Research in Engineering Sciences: Theory and Applications, 4(1), 115–135. https://doi.org/10.31181/oresta20401156j
Kannan, D., Govindan, K., & Rajendran, S. (2015). Fuzzy Axiomatic design approach based green supplier selection: A case study from Singapore. Journal of Cleaner Production, 96, 194–208. https://doi.org/10.1016/j.jclepro.2013.12.076
Kannan, D., Khodaverdi, R., Olfat, L., Jafarian, A., & Diabat, A. (2013). Integrated fuzzy multi criteria decision making method and multi-objective programming approach for supplier selection and order allocation in a green supply chain. Journal of Cleaner Production, 47, 355–367. https://doi.org/10.1016/j.jclepro.2013.02.010
Kilic, H. S., & Yalcin, A. S. (2020). Modified two-phase fuzzy goal programming integrated with IF-TOPSIS for green supplier selection. Applied Soft Computing, 93, 106371. https://doi.org/10.1016/j.asoc.2020.106371
Konys, A. (2019). Green supplier selection criteria: From a literature review to a comprehensive knowledge base. Sustainability, 11(15), 4208. https://doi.org/10.3390/su11154208
Kuo, T., Hsu, C.-W., & Li, J.-Y. (2015). Developing a green supplier selection model by using the DANP with VIKOR. Sustainability, 7(2), 1661–1689. https://doi.org/10.3390/su7021661
Lo, H.-W., Liou, J. J. H., Wang, H.-S., & Tsai, Y.-S. (2018). An integrated model for solving problems in green supplier selection and order allocation. Journal of Cleaner Production, 190, 339–352. https://doi.org/10.1016/j.jclepro.2018.04.105
Maksimović, A., Osmanović, N., & Puška, A. (2017). Green supplier selection for the need of fruit production using fuzzy logic. Technics Technologies Education Management (TTEM), 12(3), 199–206.
Matić, B., Jovanović, S., Das, D. K., Zavadskas, E. K., Stević, Ž, Sremac, S., & Marinković, M. (2019). A new hybrid MCDM model: Sustainable supplier selection in a construction company. Symmetry, 11, 353. https://doi.org/10.3390/sym11030353
Meksavang, P., Shi, H., Lin, S.-M., & Liu, H.-C. (2019). An Extended picture fuzzy VIKOR approach for sustainable supplier management and its application in the beef Industry. Symmetry, 11(4), 468. https://doi.org/10.3390/sym11040468
Nedeljković, M., Puška, A., Doljanica, S., VirijevićJovanović, S., Brzaković, P., Stević, Ž, & Marinkovic, D. (2021). Evaluation of rapeseed varieties using novel integrated fuzzy PIPRECIA: Fuzzy MABAC model. PLoS ONE, 16(2), e0246857. https://doi.org/10.1371/journal.pone.0246857
Nedeljković, M., Puška, A., Suzić, R., & Maksimović, A. (2022). Multicriteria model of support for the selection of pear varieties in raising orchards in the semberija region (Bosnia and Herzegovina). Sustainability, 14(3), 1584. https://doi.org/10.3390/su14031584
Pamučar, D., Puška, A., Stević, Ž, & Ćirović, G. (2021). A new intelligent MCDM model for HCW management: The integrated BWM-MABAC model based on D numbers. Expert Systems with Applications, 175, 114862. https://doi.org/10.1016/j.eswa.2021.114862
Pimenta, H. C. D., & Ball, P. D. (2015). Analysis of environmental sustainability practices across upstream supply chain management. Procedia CIRP, 26, 677–682. https://doi.org/10.1016/j.procir.2014.07.036
Puška, A., Kozarević, S., Stević, Ž, & Stovrag, J. (2018). A new way of applying interval fuzzy logic in group decision making for supplier selection. Economic Computation and Economic Cybernetics Studies and Research, 52(2), 217–234. https://doi.org/10.24818/18423264/52.2.18.13
Puška, A., Nedeljković, M., Zolfani, S. H., & Pamučar, D. (2021). Application of interval fuzzy logic in selecting a sustainable supplier on the example of agricultural production. Symmetry, 13(5), 774. https://doi.org/10.3390/sym13050774
Puška, A., Stojanović, I., & Maksimović, A. (2019). Evaluation of sustainable rural tourism potential in Brcko district of Bosnia and Herzegovina using multi-criteria analysis. Operational Research in Engineering Sciences: Theory and Applications, 2(2), 40–54. https://doi.org/10.31181/oresta190261p
Račić, ŽV. (2018). Fuzzification: Decision making in terms of uncertainty. Economics—Innovative and Economic Research, 6(2), 87–94. https://doi.org/10.2478/eoik-2018-0022
Radović, D., Stević, Ž, Pamučar, D., Zavadskas, E., Badi, I., Antuchevičiene, J., & Turskis, Z. (2018). Measuring performance in transportation companies in developing countries: A novel rough ARAS model. Symmetry, 10(10), 434. https://doi.org/10.3390/sym10100434
Riaz, M., Faridm, H. M. A., Aslam, M., Pamucar, D., & Bozanić, D. (2021). Novel approach for third-party reverse logistic provider selection process under linear diophantine fuzzy prioritized aggregation operators. Symmetry., 13(7), 1152.
Rouyendegh, B. D., Yildizbasi, A., & Üstünyer, P. (2019). Intuitionistic Fuzzy TOPSIS method for green supplier selection problem. Soft Computing. https://doi.org/10.1007/s00500-019-04054-8
Sénquiz-Díaz, C. (2021). Transport infrastructure quality and logistics performance in exports. Economics: Innovative and Economic Research, 9(1), 107–124. https://doi.org/10.2478/eoik-2021-0008
SeyedHaeri, S. A., & Rezaei, J. (2019). A grey-based green supplier selection model for uncertain environments. Journal of Cleaner Production, 221, 768–784. https://doi.org/10.1016/j.jclepro.2019.02.193
Stanujkić, D., Zavadskas, E. K., Karabasević, D., Smarandache, F., & Turskis, Z. (2017). The use of the pivot pairwise relative criteria importance assessment (PIPRECIA) method for determining the weights of criteria. Romanian Journal of Economic Forecasting, 20(4), 118–136.
Stević, Ž, Stjepanović, Ž, Božičković, Z., Das, D., & Stanujkić, D. (2018). Assessment of conditions for implementing information technology in a warehouse system: A novel fuzzy PIPRECIA method. Symmetry, 10(11), 586. https://doi.org/10.3390/sym10110586
Stević, Ž, Vasiljević, M., Puška, A., Tanackov, I., Junevičius, R., & Vesković, S. (2019). Evaluation of suppliers under uncertainty: A multiphase approach based on fuzzy AHP and fuzzy EDAS. Transport, 34(1), 52–66. https://doi.org/10.3846/transport.2019.7275
Stojanović, I., Ateljević, J., & Stević, R. S. (2016). Good Governance as a tool of sustainable development. European Journal of Sustainable Development, 5(4), 558. https://doi.org/10.14207/ejsd.2016.v5n4p558
Wang Chen, H. M., Chou, S.-Y., Luu, Q. D., & Yu, T.H.-K. (2016). A fuzzy MCDM approach for green supplier selection from the economic and environmental aspects. Mathematical Problems in Engineering. https://doi.org/10.1155/2016/8097386
Wei, C., Wu, J., Guo, Y., & Wei, G. (2021). Green supplier selection based on codas method in probabilistic uncertain linguistic environment. Technological and Economic Development of Economy, 27(3), 530–549. https://doi.org/10.3846/tede.2021.14078
Yazdani, M., Chatterjee, P., Zavadskas, E. K., & HashemkhaniZolfani, S. (2017). Integrated QFD-MCDM framework for green supplier selection. Journal of Cleaner Production, 142, 3728–3740. https://doi.org/10.1016/j.jclepro.2016.10.095
Yu, Q., & Hou, F. (2016). An approach for green supplier selection in the automobile manufacturing industry. Kybernetes, 45(4), 571–588. https://doi.org/10.1108/k-01-2015-0034
Zavadskas, E. K., & Turskis, Z. (2010). A new additive ratio assessment (ARAS) method in multicriteria decision-making. Technological and Economic Development of Economy, 16(2), 159–172. https://doi.org/10.3846/tede.2010.10