Graphene as a promising additive to hierarchically porous carbon monoliths for enhanced H2 and CO2 sorption

Xia, 2013, Porous carbon-based materials for hydrogen storage: advancement and challenges, J. Mater. Chem. A, 1, 9365, 10.1039/c3ta10583k Xia, 2021, Tuning the pore structure and surface chemistry of porous graphene for CO2 capture and H2 storage, Colloids Surf. A: Physicochem. Eng. Asp., 622, 10.1016/j.colsurfa.2021.126640 Li, 2020, Progress on synthesis and applications of porous carbon materials, Int. J. Electrochem. Sci., 15, 1363, 10.20964/2020.02.04 Blankenship, 2017, Oxygen-rich microporous carbons with exceptional hydrogen storage capacity, Nat. Commun., 8, 1545, 10.1038/s41467-017-01633-x Romanos, 2018, Nanoporous graphene monolith for hydrogen storage, Mater. Today.: Proc., 5, 17478 Ioannatos, 2010, H2 storage on single- and multi-walled carbon nanotubes, Int. J. Hydrog. Energy, 35, 622, 10.1016/j.ijhydene.2009.11.029 Zhang, 2020, Preparation of nitrogen-doped hierarchical porous carbon materials by a template-free method and application to CO2 capture, J. Environ. Chem. Eng., 8, 10.1016/j.jece.2020.103732 Almáši, 2021, Anionic zinc(II) metal-organic framework post-synthetically modified by alkali-ion exchange: Synthesis, characterization and hydrogen adsorption properties, Inorg. Chim. Acta, 526, 10.1016/j.ica.2021.120505 Hirscher, 2010, Metal-organic frameworks for hydrogen storage, Microporous Mesoporous Mater., 129, 335, 10.1016/j.micromeso.2009.06.005 Almáši, 2021, Zinc(II) and cadmium(II) amorphous metal–organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases, RSC Adv., 11, 20137, 10.1039/D1RA02938J Garg, 2022, Gd(III) metal-organic framework as an effective humidity sensor and its hydrogen adsorption properties, Chemosphere, 305, 10.1016/j.chemosphere.2022.135467 M. Nemiwal, V. Sharma, D. Kumar, Improved Designs of Multifunctional Covalent-Organic Frameworks: Hydrogen Storage, Methane Storage, and Water Harvesting, Mini-Reviews in Organic Chemistry. 18 (n.d.) 1026–1036. Dong, 2007, Hydrogen storage in several microporous zeolites, Int. J. Hydrog. Energy, 32, 4998, 10.1016/j.ijhydene.2007.08.009 M.O. Ozbek, B. Ipek, A. Theoretical Investigation of Cu+, Ni2+ and Co2+-Exchanged Zeolites for Hydrogen Storage, ChemPhysChem. n/a (n.d.) e202200272. https://doi.org/10.1002/cphc.202200272. Liu, 2021, Efficient separation of acetylene and carbon dioxide in a decorated zeolite, Angew. Chem. Int. Ed., 60, 6526, 10.1002/anie.202014680 Ahsan, 2022, A comprehensive comparison of zeolite-5A molecular sieves and amine-grafted SBA-15 silica for cyclic adsorption-desorption of carbon dioxide in enclosed environments, Chem. Eng. J., 437, 10.1016/j.cej.2022.135139 Policicchio, 2020, Hydrogen storage performances for mesoporous silica synthesized with mixed tetraethoxysilane and methyltriethoxysilane precursors in acidic condition, Colloids Surf. A: Physicochem. Eng. Asp., 601, 10.1016/j.colsurfa.2020.125040 Mohan, 2019, Hydrogen storage in carbon materials—A review, Energy Storage, 1, 10.1002/est2.35 Abd, 2021, A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement, Environ. Sci. Pollut. Res, 28, 43329, 10.1007/s11356-021-15121-9 Ghanbari, 2019, Characteristics of oat hull based biosorbent for natural gas dehydration in a PSA process, J. Nat. Gas. Sci. Eng., 61, 320, 10.1016/j.jngse.2018.11.014 Cabria, 2007, The optimum average nanopore size for hydrogen storage in carbon nanoporous materials, Carbon, 45, 2649, 10.1016/j.carbon.2007.08.003 Gogotsi, 2009, Importance of pore size in high-pressure hydrogen storage by porous carbons, Int. J. Hydrog. Energy, 34, 6314, 10.1016/j.ijhydene.2009.05.073 Zhang, 2021, Hierarchical porous graphene oxide/carbon foam nanocomposites derived from larch for enhanced CO2 capture and energy storage performance, J. CO2 Util., 52, 10.1016/j.jcou.2021.101666 Rehman, 2018, Comparative study of activation methods to design nitrogen-doped ultra-microporous carbons as efficient contenders for CO2 capture, Chem. Eng. J., 352, 539, 10.1016/j.cej.2018.07.046 Rehman, 2019, Tunable nitrogen-doped microporous carbons: Delineating the role of optimum pore size for enhanced CO2 adsorption, Chem. Eng. J., 362, 731, 10.1016/j.cej.2019.01.063 Attia, 2020, Facile synthesis of hybrid porous composites and its porous carbon for enhanced H2 and CH4 storage, Int. J. Hydrog. Energy, 45, 32797, 10.1016/j.ijhydene.2020.03.004 Yeon, 2010, Enhanced volumetric hydrogen and methane storage capacity of monolithic carbide-derived carbon, Microporous Mesoporous Mater., 131, 423, 10.1016/j.micromeso.2010.02.002 Dutta, 2014, Hierarchically porous carbon derived from polymers and biomass: effect of interconnected pores on energy applications, Energy Environ. Sci., 7, 3574, 10.1039/C4EE01075B Szczęśniak, 2017, Gas adsorption properties of graphene-based materials, Adv. Colloid Interface Sci., 243, 46, 10.1016/j.cis.2017.03.007 Alvial-Palavicino, 2019, The rise of graphene expectations: Anticipatory practices in emergent nanotechnologies, Futures, 109, 192, 10.1016/j.futures.2018.10.008 Pei, 2020, Hydrogen storage mechanism in transition metal decorated graphene oxide: The symbiotic effect of oxygen groups and high layer spacing, Int. J. Hydrog. Energy, 45, 6713, 10.1016/j.ijhydene.2019.12.095 Xia, 2014, Hierarchical porous graphene-based carbons prepared by carbon dioxide activation and their gas adsorption properties, Int. J. Hydrog. Energy, 39, 11047, 10.1016/j.ijhydene.2014.05.059 Hotová, 2015, Effect of pyrolysis temperature and thermal oxidation on the adsorption properties of carbon cryogels, Thermochim. Acta, 614, 45, 10.1016/j.tca.2015.06.001 Bulavová, 2018, Facile synthesis of soft-templated carbon monoliths with hierarchical porosity for fast adsorption from liquid media, Microporous Mesoporous Mater., 272, 155, 10.1016/j.micromeso.2018.06.024 Zelenková, 2021, Thermoporometry of porous carbon: The effect of the carbon surface chemistry on the thickness of non-freezable pore water layer (delta layer, Microporous Mesoporous Mater., 326, 10.1016/j.micromeso.2021.111358 Kapkowski, 2021, Toward a viable ecological method for regenerating a commercial SCR catalyst – Selectively leaching surface deposits and reconstructing a pore landscape, J. Clean. Prod., 316, 10.1016/j.jclepro.2021.128291 Capková, 2022, Influence of metal-organic framework MOF-76(Gd) activation/carbonization on the cycle performance stability in Li-S battery, J. Energy Storage, 51, 10.1016/j.est.2022.104419 Zelenka, 2022, Carbon dioxide and hydrogen adsorption study on surface-modified HKUST-1 with diamine/triamine, Sci. Rep., 12, 17366, 10.1038/s41598-022-22273-2 Szczęśniak, 2018, Effect of graphene oxide on the adsorption properties of ordered mesoporous carbons toward H2, C6H6, CH4 and CO2, Microporous Mesoporous Mater., 261, 105, 10.1016/j.micromeso.2017.10.054 Mohan, 2017, Quantification and analysis of Raman spectra of graphene materials, Graph. Technol., 2, 47, 10.1007/s41127-017-0012-7 Tang, 2014, Three dimensional graphene aerogels and their electrically conductive composites, Carbon, 77, 592, 10.1016/j.carbon.2014.05.063 E.I. Bîru, H. Iovu, Graphene Nanocomposites Studied by Raman Spectroscopy, in: G.M. do Nascimento (Ed.), Raman Spectroscopy, InTech, 2018. https://doi.org/10.5772/intechopen.73487. Alizadeh, 2020, Effect of graphene oxide on morphological and structural properties of graphene reinforced novolac-derived carbon aerogels: A modified Quasi-Percolation Model, Ceram. Int., 46, 11179, 10.1016/j.ceramint.2020.01.139 Huang, 2012, Preparation and swelling properties of graphene oxide/poly(acrylic acid-co-acrylamide) super-absorbent hydrogel nanocomposites, Colloids Surf. A: Physicochem. Eng. Asp., 401, 97, 10.1016/j.colsurfa.2012.03.031 Khalaj, 2017, Structural, mechanical and thermal behaviors of novolac/graphene oxide nanocomposite aerogels, J. Non-Cryst. Solids, 460, 19, 10.1016/j.jnoncrysol.2017.01.026 Peng, 2016, Comparison of Pb(II) adsorption onto graphene oxide prepared from natural graphites: Diagramming the Pb(II) adsorption sites, Appl. Surf. Sci., 364, 620, 10.1016/j.apsusc.2015.12.208 Ţucureanu, 2016, FTIR Spectroscopy for Carbon Family Study, Crit. Rev. Anal. Chem., 46, 502, 10.1080/10408347.2016.1157013 Liu, 2013, The preparation and characterization graphene-cross-linked phenol–formaldehyde hybrid carbon xerogels, J. Sol. -Gel Sci. Technol., 67, 304, 10.1007/s10971-013-3080-z Yang, 2018, Graphene functionalized bio-carbon xerogel for achieving high-rate and high-stability supercapacitors, Electrochim. Acta, 282, 813, 10.1016/j.electacta.2018.06.131 Vinayan, 2012, Synthesis of graphene-multiwalled carbon nanotubes hybrid nanostructure by strengthened electrostatic interaction and its lithium ion battery application, J. Mater. Chem., 22, 9949, 10.1039/c2jm16294f Lei, 2016, Effects of graphene oxide addition on the synthesis and supercapacitor performance of carbon aerogel particles, RSC Adv., 6, 40683, 10.1039/C6RA07888E Dubey, 2014, Synthesis of graphene–carbon sphere hybrid aerogel with silver nanoparticles and its catalytic and adsorption applications, Chem. Eng. J., 244, 160, 10.1016/j.cej.2014.01.042 Thommes, 2015, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report, Pure Appl. Chem., 87, 1051, 10.1515/pac-2014-1117 Taraba, 2017, Study of micropores accessibility in coals and activated carbon using immersion heats with C1–C4 alkanols, J. Therm. Anal. Calor., 128, 1505, 10.1007/s10973-016-6041-2 Zelenka, 2016, Adsorption and desorption of nitrogen at 77 K on micro- and meso- porous materials: Study of transport kinetics, Microporous Mesoporous Mater., 227, 202, 10.1016/j.micromeso.2016.03.009 Veselá, 2016, The influence of pyrolytic temperature on sorption ability of carbon xerogel based on 3-aminophenol-formaldehyde polymer for Cu(II) ions and phenol, J. Anal. Appl. Pyrolysis, 121, 29, 10.1016/j.jaap.2016.06.016 Kryeziu, 2022, Porous carbon monoliths from ice-NaOH templated dissolved cellulose, Ind. Crops Prod., 183, 10.1016/j.indcrop.2022.114961 Štefelová, 2017, Biosorption (removing) of Cd(II), Cu(II) and methylene blue using biochar produced by different pyrolysis conditions of beech and spruce sawdust, Wood Sci. Technol., 51, 1321, 10.1007/s00226-017-0928-3 Ravikovitch, 2000, Unified approach to pore size characterization of microporous carbonaceous materials from N2, Ar, and CO2 adsorption isotherms, Langmuir, 16, 2311, 10.1021/la991011c Qiu, 2017, Graphene-containing ordered mesoporous carbons synthesized by one-pot aqueous route and its electrochemical performance, Polym. Compos., 38, 1438, 10.1002/pc.23711 Xing, 2014, Oxygen-containing functional group-facilitated CO2 capture by carbide-derived carbons, Nanoscale Res. Lett., 9, 189, 10.1186/1556-276X-9-189 Zhu, 2014, Nitrogen-enriched and hierarchically porous carbon macro-spheres – ideal for large-scale CO 2 capture, J. Mater. Chem. A, 2, 5481, 10.1039/C4TA00438H Yurdusen, 2020, The role of ultramicropores on the CO2 adsorption capacity of Fe-BTC crystallites synthesized with a perturbation assisted nanofusion synthesis strategy, CrystEngComm, 22, 10.1039/C9CE01626K Qin, 2022, A microporous 2D cobalt-based MOF with pyridyl sites and open metal sites for selective adsorption of CO2, Microporous Mesoporous Mater., 341, 10.1016/j.micromeso.2022.112098 Muhammad, 2018, Harnessing electron-rich framework in cyclophosphazene derived hybrid nanoporous materials for organocatalytic CC bond formation and gas sorption applications, J. CO2 Util., 25, 302, 10.1016/j.jcou.2018.04.008 Hao, 2013, Porous carbon nanosheets with precisely tunable thickness and selective CO2 adsorption properties, Energy Environ. Sci., 6, 3740, 10.1039/c3ee41906a Guo, 2018, Polyacrylonitrile-derived sponge-like micro/macroporous carbon for selective CO2 separation, Chem. – A Eur. J., 24, 8369, 10.1002/chem.201800631