Generation of micro-nano bubbles by self-developed swirl-type micro-nano bubble generator

Mian Wu1, Haoyuan Song1, Xing Liang1,2, Neng Huang3, Xiaobing Li2
1School of Chemical Engineering and Technology, China University of Mining and Technology, Xuzhou, Jiangsu 221116, PR China
2National Center for Coal Preparation and Purification Engineering Research, China University of Mining and Technology, No.1 Daxue Road, South, Xuzhou, Jiangsu 221116, PR China
3University of Kentucky Center for Applied Energy Research, Lexington, KY 40511, USA

Tài liệu tham khảo

Hu, 2018, Application of ozone micro-nano-bubbles to groundwater remediation, J. Hazard. Mater., 342, 446, 10.1016/j.jhazmat.2017.08.030 Kim, 2020, Effect of nanobubbles for improvement of water quality in freshwater: flotation model simulation, Sep. Purif. Technol., 241, 116731, 10.1016/j.seppur.2020.116731 Wang, 2021, Bubble breakup in a swirl-venturi microbubble generator, Chem. Eng. J., 403, 126397, 10.1016/j.cej.2020.126397 Shuai, 2019, Characterization of the bubble swarm trajectory in a jet bubbling reactor, AlChE J., 65, e16565, 10.1002/aic.16565 Shuai, 2019, Classification and identification of gas–liquid dispersion states in a jet bubbling reactor, AlChE J., 66, e16778, 10.1002/aic.16778 Wang, 2020, Performance comparison of swirl-venturi bubble generator and conventional venturi bubble generator, Chem. Eng. Process. Process Intensif., 154, 10.1016/j.cep.2020.108022 Huang, 2020, An investigation on the performance of a micro-scale venturi bubble generator, Chem. Eng. J., 386, 120980, 10.1016/j.cej.2019.02.068 Garcia, 2016, Experimental characterization of the viscous liquid sprays generated by a venturi-vortex atomizer, Chem. Eng. Process. Process Intensif., 105, 117, 10.1016/j.cep.2016.01.004 Li, 2019, Study of venturi tube geometry on the hydrodynamic cavitation for the generation of microbubbles, Miner. Eng., 132, 268, 10.1016/j.mineng.2018.11.001 Zhao, 2019, Effects of the divergent angle on bubble transportation in a rectangular venturi channel and its performance in producing fine bubbles, Int. J. Multiph. Flow, 114, 192, 10.1016/j.ijmultiphaseflow.2019.02.003 Zhao, 2017, A visualized study of the motion of individual bubbles in a venturi-type bubble generator, Prog. Nucl. Energy, 97, 74, 10.1016/j.pnucene.2017.01.004 Jiang, 2021, Miniaturization of bubbles by shock waves in gas-liquid two-phase flow in the venturi tube, J. Therm. Sci., 30, 1068, 10.1007/s11630-021-1432-5 Song, 2019, Experimental studies on bubble breakup mechanism in a venturi bubble generator, Ann. Nucl. Energy, 130, 259, 10.1016/j.anucene.2019.02.020 Huang, 2020, A review on bubble generation and transportation in venturi-type bubble generators, Exp. Comput. Multiph. Flow, 2, 123, 10.1007/s42757-019-0049-3 Ding, 2018, Structural design and numerical simulation of axial-swirling type micro-bubble generator, Chin. J. Process Eng., 18, 934 Kogawa, 2015, Development of micro-bubble generator for suppression of pressure waves in mercury target of spallation source, J. Nucl. Sci. Technol., 52, 1461, 10.1080/00223131.2015.1009188 Wu, 2022, Micro-nano bubbles production using a swirling-type venturi bubble generator, Chem. Eng. Process. Process Intensif., 170, 108697, 10.1016/j.cep.2021.108697 Hsiao, 2011, Effect of geometric configuration on the collection efficiency of axial flow cyclones, J. Aerosol Sci., 42, 78, 10.1016/j.jaerosci.2010.11.004 Zeng, 2022, Numerical and experiment investigation on novel guide vane structures of turbo air classifier, Processes, 10, 844, 10.3390/pr10050844 Pan, 2012, Research on spiral guiding devices and preventing, Chem. Ind. Eng. Progress, 31, 1215 Jiang, 2010, Simulation analysis and experimental study of deoiling hydrocyclone by compact axial-flow type, Chin. J. Oil Gas Field Surf. Eng., 29, 18 Zhou, 2018, Experimental and CFD study on effects of spiral guide vanes on cyclone performance, Adv. Powder Technol., 29, 3394, 10.1016/j.apt.2018.09.022 Yuan, 2020, Experimental and numerical study on flow resistance and bubble transport in a helical static mixer, Energies, 13, 1228, 10.3390/en13051228 Koichi, 2011, Development of microbubble aerator for waste water treatment using aerobic activated sludge, Chem. Eng. Sci., 66, 3172, 10.1016/j.ces.2011.02.043 Wen, 2020, Performance of steam ejector with non-equilibrium condensation for multi-effect distillation with thermal vapour compression (MEDTVC) seawater desalination system, Desalination, 489, 114531, 10.1016/j.desal.2020.114531 Wen, 2020, A first study of the potential of integrating an ejector in hydrogen fuelling stations for fuelling high pressure hydrogen vehicles, Appl. Energy, 260, 113958, 10.1016/j.apenergy.2019.113958 Schiller, 1935, A drag coefficient correlation, Zeitschrift des Vereins Deutscher Ingenieure, 77, 318 Martínez-Bazán, 1999, On the breakup of an air bubble injected into a fully developed turbulent flow. Part 1. Breakup frequency, J. Fluid Mech., 401, 157, 10.1017/S0022112099006680 Li, 2022, Numerical investigation on the coupled mechanisms of bubble breakup in a venturi-type bubble generator, Eng. Appl. Comp. Fluid, 16, 229 Li, 2021, Comparison of bubble velocity, size, and holdup distribution between single- and double-air inlet in jet microbubble generator, Asia Pac. J. Chem. Eng., 16, e2611, 10.1002/apj.2611 Rajapakse, 2022, Effects of influent physicochemical characteristics on air dissolution, bubble size and rise velocity in dissolved air flotation: a review, Sep. Purif. Technol., 289, 10.1016/j.seppur.2022.120772