Gelation behavior of thermoplastic-modified epoxy systems during polymerization-induced phase separation
Tóm tắt
The rheological behavior and gelation characteristics of epoxy blends are of critical importance to property study and industrial application. In this work, we studied the rheological behavior and structural transition of different thermoplastics, including polyetherimide, polymethylmethacrylate, and polyethersulfone (PES), modified epoxy systems by using rheometry instrument, differential scanning calorimetry, time-resolved light scattering, and scanning electronic microscopes. At the same molecular weight level of thermoplastics, different epoxy blends show profound diversities on the rheological and gelation behavior due to the large differences in phase separation and curing process. For early phase-separation systems of PES-modified epoxy blends, two gel points are identified, which correspond to physical gelation and chemical gelation, respectively. With the variation of the PES molecular weight and curing rate, dramatic changes in gel time and critical exponent were observed. As the molecular weight of thermoplastics is increased, the gelation time becomes shorter and the gel strength gets lower, while the faster curing rate would increase the physical gel strength significantly.
Tài liệu tham khảo
Bucknall CB, Partridge IK (1983) Polymer 24:639
Kim BS, Chiba T, Inoue T (1995) Polymer 36:43
Pearson RA, Yee AF (1993) J Appl Polym Sci 48:1051
Lee BK, Kim SC (1995) Polym Adv Technol 6:402
Francis B, Rao VL, Poel GV, Posada F, Groeninckx G, Ramaswamy R, Thomas S (2006) Polymer 47:5411
Venderbosch RW, Meijer HEH, Lemstra PJ (1995) Polymer 36:2903
Blanco I, Cicala G, Motta O, Recca A (2004) J Appl Polym Sci 94:361
Min BG, Hodgkin JH, Stachurski ZH (1993) J Appl Polym Sci 50:1065
Bennett GS, Farris RJ, Thompson SA (1991) Polymer 32:1633
Goossens S, Groeninckx G (2006) Macromolecules 39:8049
Tercjak A, Serrano E, Rerniro PM, Mondragon I (2006) J Appl Polym Sci 100:2348
Woo EM, Wu MN (1996) Polymer 37:1907
Chen WJ, Kobayashi S, Inoue T, Ohnaga T, Ougizawa T (1994) Polymer 35:4015
Kinloch AJ, Yuen ML, Jenkins SD (1994) J Mater Sci 29:3781
Pethrick RA, Hollins EA, McEwan I, MacKinnon AJ, Hayward D, Cannon LA, Jenkins SD, McGrail PT (1996) Macromolecules 29:5208
Gan WJ, Yu YF, Wang MH, Tao QS, Li SJ (2003) Macromolecules 36:7746
Yu YF, Wang MH, Gan WJ, Tao QS, Li SJ (2004) J Phys Chem B 108:6208
Jose J, Joseph K, Pionteck J, Thomas S (2008) J Phys Chem B 112:14793
Jyotishkumar P, Koetz J, Tiersch B, Strehmel V, Ozdilek C, Moldenaers P, Hassler R, Thomas S (2009) J Phys Chem B 113:5418
Tanaka H (2009) Adv Mater 21:1872
Tanaka H (1993) Phys Rev Lett 71:3158
Tanaka H (1996) Phys Rev Lett 76:787
Taniguchi T, Onuki A (1996) Phys Rev Lett 77:4910
Tanaka H (2000) J Phys Condens Matter 12:R207
Araki T, Tanaka H (2001) Macromolecules 34:1953
Inoue T (1995) Prog Polym Sci 20:119
Bonnet A, Pascault JP, Sautereau H, Camberlin Y (1999) Macromolecules 32:8524
Blanco I, Cicala G, Lo Faro C, Motta O, Recca G (2006) Polym Eng Sci 46:1502
Yu YF, Zhang ZC, Gan WJ, Wang MH, Li SJ (2003) Ind Eng Chem Res 42:3250
Liu XY, Zhan GZ, Yu YF, Li SJ (2006) J Polym Sci Part B-Polym Phys 44:3102
Yu YF, Wang MH, Gan WJ, Li SJ (2006) Colloid Polym Sci 284:1185
Gan WJ, Zhan GZ, Wang MG, Yu YF, Xu YZ, Li SJ (2007) Colloid Polym Sci 285:1727
Yu YF, Wang MH, Foix D, Li SJ (2008) Ind Eng Chem Res 47:9361
Winter HH, Chambon F (1986) J Rheol (Melville, NY, U S) 30:367
Scanlan JC, Winter HH (1991) Macromolecules 24:47
Lairez D, Adam M, Emery JR, Durand D (1992) Macromolecules 25:286
Yung-Sin C, Jun-Shen L, Tzyy-Lung Y, John-Chang C, Wen-Yih C, Min-Chin C (1995) Macromol Chem Phys 196:3447
Foix D, Yu YF, Serra A, Ramis X, Salla JM (2009) Eur Polym J 45:1454
Gan WJ, Yu YF, Liu XY, Wang MH, Li SJ (2009) Colloid Polym Sci 287:23
Kim H, Char K (2000) Ind Eng Chem Res 39:955