Gas turbine coatings – An overview

Smarsly W. Coatings for advanced aero engine materials. In: 8th High power impulse magnetron sputtering (HIPIMS) conference, University of Sheffield, UK; 1–2 July, 2009.

Davis, 2004

Sulzer metco. Braze material guide; 2011.

Erosion. <http://www.praxair.com/na/us/pst/pst.nsf/0/0B8DDF7ED3B6DDEE852576A50054DA1A?OpenDocument>.

Helm D, Roder O. Recent titanium research and development in Germany. <http://www.mtu.de/en/technologies/engineering_news/others/Helm_Recent_titanium_research.pdf>.

Simpson G. Foreign comparative test program on “Russian erosion resistant coatings for US Navy GTE compressors; 2001. <http://www.jdmag.wpafb.af.mil/russian%20coating.pdf>.

Borawski, 2011, The influence of ductile interlayer material on the particle erosion resistance of multilayer TiN based coatings, Wear, 10.1016/j.wear.2011.06.004

Brendel T, Heutling F, Eichmann F, Ucker M, Uihlein T. MTU solutions against erosive attack and loss of EGT margin in turbo engines-ER coat. MTU technical publication; 2008.

Park, 2006, Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts, Surf Coat Technol, 201, 2181, 10.1016/j.surfcoat.2006.03.031

Cortez, 1999, Investigation of variable amplitude loading on fretting fatigue behavior of Ti–6Al–4V, Int J Fatigue, 21, 709, 10.1016/S0142-1123(99)00034-1

Kermanpur, 2008, Failure analysis of Ti6Al4V gas turbine compressor blades, Eng Fail Anal, 15, 1052, 10.1016/j.engfailanal.2007.11.018

Thomson. State of art report elimination of fretting. Erika Bellhouse, 000922815, MME419; 2002.

Namjoshi, 2002, Effect of shot peening on fretting fatigue behaviour of Ti–6Al–4V, Trans ASME J Eng Mater Technol, 124, 222, 10.1115/1.1448323

Shepard M, Prevey PS, Jayaraman N. Effect of surface treatment on fretting fatigue performance of Ti–6Al–4V. In: Proceedings of 8th turbine engine high cycle fatigue conference, Monterey, CA; 2003.

Hager, 2009, The use of nickel graphite composite coatings for the mitigation of gross slip fretting wear on Ti6Al4V interfaces, Wear, 267, 1470, 10.1016/j.wear.2009.03.023

Zhou, 1999, Lubrication in fretting – a review, Wear, 225–229, 962, 10.1016/S0043-1648(99)00038-1

Sulzer, 2010, Copper nickel and copper nickel indium thermal spray powders, Techn Bullet, 1

Praxair surface technologies. Praxair and TAFA arc spray copper–nickel–indium wire-58T. Technical bulletin; 2000. p. 1–4.

Lugscheider E, Zwick J, Hertter M, Sporer D. Control of coating properties of abradable seals by on-line process diagnostics. <http://www.mtu.de/en/technologies/engineering_news/development/Hertter_Control_of_coating_en.pdf>.

Ma, 2007, Investigation of abradable seal coating performance using scratch testing, Surf Coat Technol, 202, 1214, 10.1016/j.surfcoat.2007.07.076

Azom.com. Abradable coatings increase gas turbine efficiency; 2011. <http://www.azom.com/article.aspx?articleid=739>.

Sulzer Metco. Thermal spray guide; 2006.

Sporer D, Xie MDL, Refke A, Giovannetti I, Giannozzi M. Processing and properties of advanced ceramic abradable coatings. <http://www.asm.confex.com/data/.../asm/.../Paper_15282_manuscript_962_0.pdf>.

Hendricks RC, Chupp RE, Lattime SB. Turbomachine interface sealing. NASA/TM-2005-213633; 2005.

Mahesh, 2008, Oxidation behavior of HVOF sprayed Ni–5Al coatings deposited on Ni- and Fe-based superalloys under cyclic condition, Mater Sci Eng A, 475, 327, 10.1016/j.msea.2007.04.108

Mahesh RA, Jayaganthan R, Prakash S. A study on hot corrosion behaviour of Ni–5Al coatings on Ni- and Fe-based superalloys in an aggressive environment at 900°C. J Alloys Compo 2008;460:220–31.

Sulzer, 2010, Nickel–5% aluminum thermal spray powders, Techn Bullet, 1

Chandler, 2001

http://www.gordonengland.co.uk/pmg13.htm.

Chupp RE, Hendricks RC, Lattime SB, Steinetz BM, Aksit MF. Turbomachinary clearance control; 2011. <http://koreadefence.net/data/board_notice/1298604178-95.pdf>.

Chupp, 2003

ASTM C633 (01)-2008. Standard test method for adhesion and cohesion strength of thermal spray coatings.

Fiala P, Hajmrle K, Chilkowich AP, Shiembob L. New high temperature titanium compatible abradable seals. In: Proceedings of 22nd heat treatment society conference and second international surface engineering conference, Seo15-17, Indianapolis, Indiana, USA, ASM international, Materials park, Ohio; 2003.

Steinke, 2010, Process design and monitoring for plasma sprayed abradable coatings, J Therm Spray Technol, 19, 756, 10.1007/s11666-010-9468-1

Sulzer Metco. Improve efficiency and reduce emissions with high pressure turbine abradable coatings for industrial gas turbines. Solution flash, SF0015.0; 2009. p. 1–8.

Ma, 2009, Evaluation of abradable seal coating mechanical properties, Wear, 267, 1501, 10.1016/j.wear.2009.03.044

Faraoun, 2006, Modelling route for abradable coatings, Surf Coat Technol, 200, 6578, 10.1016/j.surfcoat.2005.11.105

Koiprasat, 2004, Thermally sprayed coating for protection of fretting wear in land based gas turbine, Wear, 257, 1, 10.1016/S0043-1648(03)00174-1

Koutsomichalis, 2009, Tribological coatings for aerospace applications and the case of WC–Co plasma spray coatings, Tribol Indust, 31, 37

Heimann, 2008, Recently patented work on thermally sprayed coatings for protection against wear and corrosion of engineered structures, Rec Patent Mater Sci, 1, 41, 10.2174/1874464810801010041

Zorawski, 2008, Tribological properties of hypersonically sprayed carbide coatings, Facult Mech Eng Trans Belgrade, 36, 81

Sahu A, Das R, Sen S, Mishra SC, Satapathy A, Ananthapadmanabhan PV, et al. Al2O3–TiO2 wear resistant coatings: a neural computation. In: International conference on advanced materials and, composites (ICAMC-2007); October 24–26, 2007.

Guilemany, 2005, Study of the property of WC–Co nanostructured coatings sprayed by high velocity oxyfuel, J Therm Spray Technol, 14, 405

Ma CH. Innovations of nano-structured coatings and their industrial applications. NSF educationa program at UO; 2007. <http://www.jsums.edu/nue-jsu/modules/0901-Nanocoating_for_Infrastructures.pdf>.

Carlton, 2007, What is behind the inverse Hall-Petch effect in nanocrystalline materials?, Acta Mater, 55, 3749, 10.1016/j.actamat.2007.02.021

Intramat nanomaterials; 2011. <http://www.inframat.com/products/S2603.htm>.

Gell, 2001, Development and implementation of plasma sprayed nanostructured ceramics, Surf Coat Technol, 146–147, 48, 10.1016/S0257-8972(01)01470-0

Erikson, 1992, Development of rhenium containing CMSX-4 and CM 186 LC for single crystal blade and directionally solidified vane applications in advanced turbine engines

Rhys-Jones, 1989, Coatings for blade and vane applications in gas turbines’, Corros Sci, 29, 623, 10.1016/0010-938X(89)90104-2

Nicholls JR, Stephenson DJ. High temperature coatings for gas turbines, intermetallic compounds. In: Westbrook JH, Fleischer RL, editors. Practice, vol. 2. John Wiley and Sons; 2000. p. 489–500.

Pakluda J, Kianikova M. Damage and performance assessment of protective coatings on turbine blades. <http://www.intechopen.com/source/pdfs/12092/InTech-Damage_and_performance_assessment_of_protective_coatings_on_turbine_blades.pdf>.

Lai, 2007

Committee on coatings for high-temperature structural materials. Coatings for high temperature structural materials; trends and opportunities. Washington: National Academy Press; 1996 [ISBN 978-0-309-08683-7].

Eliaz, 2002, Hot corrosion in gas turbine components, Eng Fail Anal, 9, 31, 10.1016/S1350-6307(00)00035-2

Coutsouradis, 1987, Protective coatig formulation and application techniques – cobalt-based superalloys for applications in gas turbines, Mater Sci Eng, 58, 11, 10.1016/0025-5416(87)90061-9

Hancock, 1987, Vanadic and chloride attack of superalloys, Mater Sci Technol, 3, 536, 10.1080/02670836.1987.11782265

Meier, 1986, A review of advanced high temperature corrosion, Mater Sci Eng A, 120, 1

Rapp, 1994, Hot corrosion of materials – fundamental studies, J Mater, 46, 47

Streiff, 1993, Protection of materials by advanced high temperature coatings, J Phys IV, 3, 17

Roberts T. The structure and stability of high temperature intermetallic phases for application within coating systems. PhD thesis. School of applied sciences. UK: Cranfield University; 2009

Eskner M. Mechanical behaviour of gas turbine coatings. PhD thesis. Stockholm, Sweden: Royal institute of technology; 2004 [ISBN91-7283-786-1].

Sourmail T. Coatings for gas turbines. University of Cambridge; 2003. <http://www.thomas-sourmail.org/coatings/single-page.html>.

Schütze, 2000, vol. 2

Fairbanks, 1987, The durability and performance of coatings in gas turbine and diesel engines, Mater Sci Eng, 88, 321, 10.1016/0025-5416(87)90101-7

N’gandu-Muamba, 1993, The reactive element effect (REE): a tentative classification, J Physiq IV Colloque C9 Suppl J Physiq III, 3, 281

Evans, 2006, Oxidation of high temperature coatings, Proc Inst Eng Part E J Aerosp Eng, 1, 10.1177/095441000622000101

US patent. Platinum modified aluminide diffusion coating and method. Patent no. 6,136,451; 2000 [24.10.00].

Das, 1999, Microstructural degradation of platinum aluminide coatings on superalloy CM247 during isothermal oxidation, Mater Sci Technol, 15, 1199, 10.1179/026708399101505112

Sivakumar, 1989, High temperature coatings for gas turbine blades: a review, Surf Coat Technol, 37, 139, 10.1016/0257-8972(89)90099-6

Beonist, 2005, Microstructure of platinum modified aluminide coating on Ni-based superalloy without prior platinum diffusion, Surf Coat Technol, 194, 48, 10.1016/j.surfcoat.2004.04.094

Rajendran, 2011, Condition assessment of gas turbine blades and coatings, Eng Fail Anal, 18, 2104, 10.1016/j.engfailanal.2011.06.017

Pedraza, 2006, Investigation of the microstructure of platinum-modified aluminide coatings, Surf Coat Technol, 200, 4032, 10.1016/j.surfcoat.2004.12.019

Zagula-Yavorska, 2012, Some properties of platinum and palladium modified aluminide coatings deposited by CVD method on nickel-base superalloys, Metall Mater, 57, 503

Angenete, 2004, Microstructural and microchemical development of simple and Pt modified aluminide diffusion coatings during long term oxidation at 1050°C, Surf Coat Technol, 176, 272, 10.1016/S0257-8972(03)00767-9

Birks N, Meier GH, Pettit FS. High temperature oxidation of metals, 2nd ed. Cambridge; 2006.

Taylor, 1996, Development of alloyed and dispersion strengthened MCrAlY coating, Surf Coat Technol, 86–87, 9, 10.1016/S0257-8972(96)02961-1

Zhang, 1998, Microstructural development of Pt-aluminide coating on CMX-4 superalloy during TMF, Surf Coat Technol, 107, 76, 10.1016/S0257-8972(98)00579-9

Angenete, 2003, Oxidation of simple and Pt modified aluminide diffusion coatings on a Ni base superalloys-I, oxide scale microstructure, Oxidat Met, 60, 47, 10.1023/A:1024665229656

Pomeroy, 2005, Identification of hot corrosion resistant MCrAlY abased bond coating for gas turbine engine applications, Surf Coat Technol, 139, 272

Angenete, 2002, Comparison of inward and downward grown Pt modified aluminide diffusion coatings on a Ni base single crystal superalloy, Surf Coat Technol, 139, 273

Angenete J. Aluminide diffusion coatings for Ni based superalloys. PhD thesis. Goteborg, Sweden: Chalmers University of technology, Goteborg University; 2002.

Vialas, 2006, Effect of Pt and Al content on the long-term high temperature oxidation behaviour and interdiffusion of Pt-modified aluminide coating deposited on Ni-base superalloys, Surf Coat Technol, 201, 3846, 10.1016/j.surfcoat.2006.07.246

Meier, 1989, High-temperature corrosion of alumina-forming coatings for superalloy, Surf Coat Technol, 39, 1, 10.1016/0257-8972(89)90036-4

Levens, 2000, Effect of composition on the oxidation and hot corrosion resistance of NiAl doped with precious metals, Surf Coat Technol, 133–134, 15

Nalin L. Degradation of environmental protection coatings for gas turbine materials. Master of philosophy thesis. School of applied science. UK: Cranfield University; 2008.

Mevrel, 1989, State of art on high temperature corrosion resistant coatings, Mater Sci Eng, A120, 13, 10.1016/0921-5093(89)90713-2

Nicholls, 2002, Smart overlay coatings-concept and practice, Surf Coat Technol, 149, 233, 10.1016/S0257-8972(01)01499-2

Donachie MJ, Donachie SJ. Superalloys. A technical guide. 2nd ed. ASM International; 2002.

Chan WY, Evans HE, Ponton CB, Nicholls JR, Simms NJ. The influence of NiAl3 on the high temperature oxidation of a plasma-sprayed overlay coating, microscopy of oxidation. In: Proceedings of fourth international conference on the microscopy of oxidation, Trinity Hall, Cambridge; 20–22 September, 1999.

Strawbridge, 1997, Spallation of oxide scales from NiCrAlY overlay coatings, Mater Sci Forum, 251–254, 365, 10.4028/www.scientific.net/MSF.251-254.365

Pomeroy, 2005, Coatings for gas turbine materials and long term stability issues, Mater Des, 26, 223, 10.1016/j.matdes.2004.02.005

Cao X. Development of new thermal barrier coating material for gas turbines. Berichte des forschungszentrums julich. PhD thesis. ISSN 0944-2942, Denmark; 2004.

Paul S. Pore architecture in ceramic thermal barrier coatings. PhD thesis. UK: Cambridge University; 2007.

Tsipas SA. Thermophysical properties of plasma sprayed thermal barrier coatings. PhD thesis. UK: Cambridge University; 2005.

Rajendran, 1995, Reduction of interconnected porosity in zirconia-based thermal barrier coating, Surf Coat Technol, 73, 198, 10.1016/0257-8972(94)02368-9

Leyens C, Schulz’ U, Pint BA, Wright IW. Influence of EB-PVD TBC microstructure on thermal barrier coating system performance under cyclic oxidation conditions. <http://www.ornl.gov/~webworks/cpr/pres/103223.pdf>.

Yanar NM, Kim GM, Petit FS, Meier GH. Degradation of EB PVD YSZ thermal barrier coatings on platinum aluminide and NiCoCrAlY bond coats during high temperature exposure. <http://www.materials.ucsb.edu/MURI/papers/Nicepaper.PDF>.

SwadŸba, 2007, Characterisation of APS TBC system during isothermal oxidation at 1100°C, Archiv Mater Sci Eng, 28, 757

Padture, 2002, Thermal barrier coatings for gas turbine engine applications, Science, 296, 280, 10.1126/science.1068609

Morrell P, Rickerby DS. Advantages/disadvantages of various TBC systems as perceived by the engine manufacturer. In: Paper presented an AGARD SMP meeting on “thermal barrier coatings”, held in Aalborg, Denmark; 15–16 October, 1997. [Published in R-823].

Bose S, Marcin JDM. Thermal barrier coating experience on gas turbine engines at Pratt&Whitney. <http://www.ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19960020878_1996039559.pdf>.

Hass, 2001, Low thermal conductivity vapor deposited zirconia microstructures, Acta Mater, 49, 973, 10.1016/S1359-6454(00)00403-1

Clarke, 2005, Thermal barrier coating materials, Mater Today, 22, 10.1016/S1369-7021(05)70934-2

Vaßen, 2010, Overview on advanced thermal barrier coatings, Surf Coat Technol, 205, 938, 10.1016/j.surfcoat.2010.08.151

Cao, 2007, Application of rare earths in thermal barrier coating materials, J Mater Sci Technol, 23, 15

Cao, 2004, Ceramic materials for thermal barrier coatings, J Eur Ceram Soc, 24, 1, 10.1016/S0955-2219(03)00129-8

Zhanga, 2009, Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition, J Alloy Compd, 473, 509, 10.1016/j.jallcom.2008.06.064

Patnaik PC, Huang X, Singh J. State of the art and future trends in the development of thermal barrier coating systems. In: Innovative missile systems, meeting proceedings RTO-MP-AVT-135, paper 38. Neuilly-sur-Seine, France, RTO; 2006. p. 38–1, 38–20.

Chen, 2009, Thermophysical properties of lanthanum zirconate coating prepared by plasma spraying and the influence of post-annealing, J Alloy Compd, 486, 391, 10.1016/j.jallcom.2009.06.162

Winstone, 2001, The contribution of advanced high-temperature materials to future aero engines, J Mater Des Appl Proc Inst Eng Part L, 125, 63, 10.1177/146442070121500201

Jang, 2005, Hardness and Young’s modulus of nanoporous EB-PVD YSZ coatings by nanoindentation, J Alloy Compd, 402, 237, 10.1016/j.jallcom.2005.02.064

Hass DD. Direct vapour deposition of thermal barrier coatings. PhD thesis. US: University of Virginia; 2000.

Jian, 2007, Overview on the development of nanostructured thermal barrier coatings, J Mater Sci Technol, 23, 449

Vaßen, 2001, Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings, Mater Sci Eng, A303, 100, 10.1016/S0921-5093(00)01853-0

Lima, 2008, Nanostructured YSZ thermal barrier coatings engineered to counteract sintering effects, Mater Sci Eng, A485, 182, 10.1016/j.msea.2007.07.082

Jordan E, Padture NP. Superior thermal barrier coatings for industrial gas turbine engines using a novel precursor plasma spray process. DOE SCIES project 03-01-SR107; 2006.