Gas permeability measurements from pressure pulse decay laboratory data using pseudo-pressure and pseudo-time transformations

Springer Science and Business Media LLC - Tập 8 Số 3 - Trang 839-847 - 2018
Botros Abdelmalek1, Zuleima T. Karpyn1, S. Liu1, Hongkyu Yoon2, Thomas Dewers2
1John and Willie Leone Family Department of Energy and Mineral Engineering, EMS Energy Institute, The Pennsylvania State University, 151 Hosler Bldg, University Park, PA, 16802, USA
2Geoscience Research and Applications, Sandia National Laboratories, Albuquerque, NM, USA

Tóm tắt

Từ khóa


Tài liệu tham khảo

Abdelmalek BFB (2016) Pseudo-pressure type curve approach for permeability and porosity estimation from pressure-pulse decay data. Master thesis in Energy and Mineral Engineering, The Pennsylvania State University

Boitnott GN (1997) Use of complex pore pressure transients to measure permeability of rocks. In: SPE annual technical conference and exhibition. Society of Petroleum Engineers

Brace WF, Walsh JB, Frangos WT (1968) Permeability of granite under high pressure. J Geophys Res 73:2225–2236

Cui X, Bustin AMM, Bustin RM (2009) Measurements of gas permeability and diffusivity of tight reservoir rocks: different approaches and their applications. Geofluids 9:208–223

Dicker AI, Smits RM (1988) A practical approach for determining permeability from laboratory pressure-pulse decay measurements. In: International meeting on petroleum engineering. Society of Petroleum Engineers

Fischer GJ (1992) Fault mechanics and transport properties of rocks—a festschrift in honor of W. F. Brace Chapter 8 the determination of permeability and storage capacity: pore pressure oscillation method. Int Geophys 51:187–211

Haskett SE, Narahara GM, Holditch SA (1988) A method for simultaneous determination of permeability and porosity in low-permeability cores. SPE Formation Evaluation

Hsieh PA, Tracy JV, Neuzil CE, Bredehoeft JD, Silliman SE (1981) A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks—I. Theory. Int J Rock Mech Min Sci Geomech Abstr 18:245–252

Jin G, Pérez HG, Al Dhamen AA, Ali SS, Nair A, Agrawal G, Khodja MR, Hussaini SR, Jangda ZZ, Ali AZ (2015) Permeability measurement of organic-rich shale—comparison of various unsteady-state methods. In: SPE annual technical conference and exhibition. Society of Petroleum Engineers

Jones SC (1997) A technique for faster pulse-decay permeability measurements in tight rocks, SPE Formation Evaluation

Kamath J, Boyer RE, Nakagawa RE (1992) Characterization of core scale heterogeneities using laboratory pressure transients, SPE Formation Evaluation

Klinkenberg L (1941) The permeability of porous media to liquids and gases. In: API 11th mid year meeting. Tulsa

Neuzil CE, Cooley C, Silliman SE, Bredehoeft JD, Hsieh PA (1981) A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks—II. Application. Int J Rock Mech Min Sci Geomech Abstr 18:253–258

Tinni A, Fathi E, Agarwal R, Sondergeld C, Akkutlu Y, Rai C (2012). Shale permeability measurements on plugs and crushed samples. In: SPE Canadian unconventional resources conference. Society of Petroleum Engineers

Zamirian M, Aminian KK, Ameri S, Fathi E (2014) New steady-state technique for measuring shale core plug permeability. In: SPE/CSUR unconventional. resources conference—Canada. Society of Petroleum Engineers