GA for enhancement of system performance by DG incorporated with D-STATCOM in distribution power networks

Al Abri, 2013, Optimal placement and sizing method to improve the voltage stability margin in a distribution system using distributed generation, IEEE Trans. Power Syst., 28, 326, 10.1109/TPWRS.2012.2200049

Baghaee, 2008, Improvement of voltage stability and reduce power system losses by optimal GA\based allocation of multi-type FACTS devices, Eleventh International Conference on Electrical and Electronics Equipment, 209

Chen, 2007, An analytical approach to harmonic analysis and controller design of STATCOM, Conference on IEEE Transactions

Dent, 2010, Network distributed generation capacity analysis using OPF with voltage step constraints, IEEE Trans. Power Syst., 25, 296, 10.1109/TPWRS.2009.2030424

Dipanjansamajpati, 2006, Distributed generation allocation for power loss minimization and voltage improvement of radial distribution systems using genetic algorithm, IEEE Trans. Power Syst., 21

Freitas, 2005, Impacts of AC generators and DSTATCOM devices on the dynamic performance of distribution systems, Conference on IEEE Transactions on Power Delivery, 1493, 10.1109/TPWRD.2004.839181

Fuerte Esquirel, 1997, A Newton type algorithm for power flow control in electrical network, IEEE Trans. Power Syst., 12, 1474, 10.1109/59.627844

Ghosh, 2003, Load compensating DSTATCOM in weak AC systems, Conference on IEEE Transactions on Power Delivery Publication, 18, 1302, 10.1109/TPWRD.2003.817743

Gupta, 2011, Performance comparison of VSC-based shunt and series compensators used for load voltage control in distribution systems, Conference on IEEE Transactions on Power Delivery Publication, 268, 10.1109/TPWRD.2010.2076341

Harrison, 2007, Exploring the trade-offs between incentives for distributed generation developers and DNOs, IEEE Trans. Power Syst., 22, 821, 10.1109/TPWRS.2007.895176

Harrison, 2008, Hybrid GA and OPF evaluation of network capacity for distributed generation connections, Electr. Power Sys. Res., 78, 392, 10.1016/j.epsr.2007.03.008

Hedayati, 2008, A method for placement of DG units in distribution networks, IEEE Trans. Power Deliv., 23, 10.1109/TPWRD.2007.916106

Hung, 2010, Analytical expressions for DG allocation in primary distribution networks, IEEE Trans. Energy Convers., 25

IEEE Task Force on Load Representation for Dynamic Performance, 1995, Standard load models for power flow and dynamic performance simulation, IEEE Trans. Power Syst., 10, 1302

Kazemi, 2018, Study of STATCOM and UPFC controllers for voltage stability evaluated by saddle node bifurcation analysis

Khalesi, 2011, DG allocation with application of dynamic programming for loss reduction and reliability improvement, Electr. Power Energy Syst., 33, 288, 10.1016/j.ijepes.2010.08.024

Kothari, M.L. Power System Dynamics (Load Modelling for Stability Studies), Department of Electrical Engineering, Indian Institute of Technology, Delhi.

Koumousis, 2006, A saw-tooth genetic algorithm combining the effects of variable population size and reinitialization to enhance performance, IEEE Trans. Evol. Comput., 10

Lashkar Ara, 2003, Comparison of the FACTS equipment operation in transmission and distribution system, Conference in 17th International Conference on Electricity Distribution Barcelona, vol. 12

Mathur, 2002

Molina, 2006, Control design and simulation of DSTATCOM with energy storage for power quality improvements, 1

Moradiand, 2012, A combination of genetic algorithm and particle swarm optimization for optimal DG location and sizing in distribution systems, Electr. Power Energy Syst., 34, 66, 10.1016/j.ijepes.2011.08.023

Nasiraghdam, 2007, Balanced and unbalanced voltage sag mitigation using DSTATCOM with linear and nonlinear loads, Conference on World Academy of Science, Engineering and Technology, 20

Oumarou, 2009, Optimal placement of shunt connected facts device in a series compensated long transmission line, vol. 1

Payasi, 2011, Review of distributed generation planning: objectives, constraints, and algorithms, Int. J. Eng. Sci. Technol., 3, 10.4314/ijest.v3i3.68430

Preethi, 2011, Application of genetic algorithm to power system voltage stability enhancement using FACTS devices, International Conference on Recent Advancement in Electrical, Electronics and Control Engineering, 333, 10.1109/ICONRAEeCE.2011.6129806

Quezada, 2006, Assessment of energy distribution losses for increasing penetration of distributed generation, IEEE Trans. Power Syst., 21, 533

Ravi Kumar, 2007, Simulation of D-STATCOM and DVR in power systems, Conf. ARPN J. Eng. Appl. Sci., 2

Singh, 2005, Power quality enhancement with DSTATCOM for small isolated alternator feeding distribution system, Conference on Power Electronics and Drive Systems, 1, 274, 10.1109/PEDS.2005.1619698

Singh, 2007, GA based optimal sizing & placement of distributed generation for loss minimization, Int. J. Electr. Comput. Eng., 2

Singh, 2007, Effect of load models in distributed generation planning, IEEE Trans. Power Deliv., 22

Singh, 2011, Application of FACTS controllers in power system for enhance the power system stability: a state-of-art, IJREC, 16

Singh, 2011, Enhancement of different performance parameters of power systems by optimally placed DG & FACTS controllers: a state-of- art, IJREC, 6

Sode Yome, 2005, Static voltage stability margin enhancement using STATCOM, TCSC, SSSC

Soroudi, 2011, A practical eco-environmental distribution network planning model including fuel cells and non-renewable distributed energy resources, Renew. Energy, 36, 179, 10.1016/j.renene.2010.06.019

Sun, 2002, Voltage flicker mitigation using PWM-based distribution STATCOM, Conference on Power Engineering Society Summer Meeting, Publication, vol. 1, 616, 10.1109/PESS.2002.1043313

Taleb, 2004, Effects of SVC And TCSC control strategies on static voltage collapse phenomenon, 161

Tanti, 2013, Optimal placement of DSTATCOM in an Indian power system for load and voltage balancing, Int. J. Electr. Eng. Technol., 4, 63

Tiwari, 2009, Optimal location of FACTS devices in power system using genetic algorithm, World Congress on Nature & Biologically Inspired Computing, 1034, 10.1109/NABIC.2009.5393860

Venkateshwarlu, 2013, Impact of SVC and DG on voltage stability constrained available transfer capability, Int. J. Eng. Trends Technol., 4

Zhu, 2006, Impact of DG placement on reliability and efficiency with time-varying loads, IEEE Trans. Power Syst., 21