Further results in J and CTOD estimation procedures for SE(T) fracture specimens – Part I: Homogeneous materials

American Society for Testing and Materials. Standard test method for measurement of fracture toughness, ASTM E1820; 2001. Hutchinson, 1983, Fundamentals of the phenomenological theory of nonlinear fracture mechanics, J Appl Mech, 50, 1042, 10.1115/1.3167187 Anderson, 2005 Eiber RJ, Kiefner JF. Failure of pipelines. Metals handbook, Failure Analysis and Prevention, 9th ed., vol. 11. American Society for Metals; 1986. p. 695–706. Donato GHB, Ruggieri C. Constraint effects and crack driving forces in surface cracked pipes subjected to reeling. In: ASME international conference on offshore mechanics and arctic engineering (OMAE 2008). Lisbon (Portugal): American Society of Mechanical Engineers; 2008. Nyhus B, Polanco M, Ørjasæter O. SENT specimens as an alternative to SENB specimens for fracture mechanics testing of pipelines. In: ASME international conference on offshore mechanics and arctic engineering (OMAE 2003). Cancun (Mexico): American Society of Mechanical Engineers; 2003. Cravero, 2005, Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens – Part I: Plane-strain analyses, Engng Fract Mech, 72, 1344, 10.1016/j.engfracmech.2004.10.010 Silva, 2006, Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens – Part II: 3-D effects on constraint, Engng Fract Mech, 73, 2123, 10.1016/j.engfracmech.2006.04.004 Shen G, Bouchard R, Gianetto JA, Tyson WR. Fracture toughness evaluation of high-strength steel pipe. In: ASME PVP 2008 pressure vessel and piping division conference (PVP 2008). Chicago (IL): American Society of Mechanical Engineers; 2008. Rice JR, Paris PC, Merkle JG. Some further results of J-integral analysis and estimates. Progress in flaws growth and fracture toughness testing, ASTM STP 536. American Society for Testing and Materials; 1973. p. 231–45. Sumpter JDG, Turner CE. Method for laboratory determination of Jc. Cracks and fracture. ASTM STP 601. American Society for Testing and Materials; 1976. p. 3–18. Kanninen, 1985 Paris PC, Ernst H, Turner CE. A J-integral approach to development of η-factors. Fracture mechanics: twelfth conference, ASTM STP 700. American Society for Testing and Materials; 1980. p. 338–51. Sharobeam, 1991, The load separation criterion and methodology in ductile fracture mechanics, Int J Fract, 41, 81, 10.1007/BF00032571 Roos, 1986, A procedure for the experimental assessment of the J-integral by means of specimens with different geometries, Int J Press Vessels Pip, 23, 81, 10.1016/0308-0161(86)90012-8 Joyce JA, Hackett EM, Roe C. Effects of crack depth and mode loading on the J–R curve behavior of a high strength steel. In: Hackett EM, et al., editors. Constraint effects in fracture, ASTM STP 1171. Philadelphia: American Society for Testing and Materials; 1993. p. 239–63. Joyce JA, Link RE. Effects of constraint on upper shelf fracture toughness. Fracture mechanics, vol. 26. ASTM STP 1256. Philadelphia: American Society for Testing and Materials; 1995. p. 142–77. Kim, 2001, Plastic η factor solutions of homogeneous and bi-material SE(T) specimens for toughness and creep crack growth testing, Fatigue Fract Engng Mater Struct, 24, 751, 10.1046/j.1460-2695.2001.00436.x Det Norsk Veritas. Fracture control for pipeline installation methods introducing cyclic plastic strain. Recommended practice DNV-RP-F108; 2006. Cravero, 2007, Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance, Engng Fract Mech, 74, 2735, 10.1016/j.engfracmech.2007.01.012 Shen G, Tyson WR. Crack size evaluation using unloading compliance in single-specimen single-edge-notched tension fracture toughness testing. J Test Eval 2009;37(4) [paper ID JTE102368]. Hutchinson JW, Paris PC. Stability analysis of J-controlled crack growth. Elastic–plastic fracture, ASTM STP 668. Philadelphia: American Society for Testing and Materials; 1979. p. 37–64. Cravero, 2008, Further developments in J evaluation procedure for growing cracks based on LLD and CMOD data, Int J Fract, 148, 387, 10.1007/s10704-008-9211-9 Kirk, 1993, J and CTOD estimation equations for shallow cracks in single edge notch bend specimens, J Test Eval, 21, 228, 10.1520/JTE11948J Shih, 1981, Relationship between the J-integral and the crack opening displacement for stationary and extending cracks, J Mech Phys Solids, 29, 305, 10.1016/0022-5096(81)90003-X American Society for Testing and Materials. Standard test method for crack-tip opening displacement (CTOD) fracture toughness measurement. ASTM E1290; 2008. British standard. Fracture mechanics toughness tests. BS 7448; 1991. Begley JA, Landes JD. The J-integral as a fracture criterion. Fracture toughness, ASTM STP 514. Philadelphia: American Society for Testing and Materials; 1972. p. 1–20. Gullerud A, Koppenhoefer K, Roy A, RoyChowdhury S, Walters M, Bichon B, et al., WARP3D: dynamic nonlinear fracture analysis of solids using a parallel computers and workstations. Structural research series (SRS) 607. UILU-ENG-95-2012. University of Illinois at Urbana-Champaign; 2004. Moran, 1987, A general treatment of crack tip contour integrals, Int J Fract, 35, 295, 10.1007/BF00276359 Ruggieri, 2011