Functionalized graphene oxide as reinforcement in epoxy based nanocomposites

McAllister, 2007, Single sheet functionalized graphene by oxidation and thermal expansion of graphite, Chem. Mater., 19, 4396, 10.1021/cm0630800

Ferreira, 2016

Ramanathan, 2008, Functionalized graphene sheets for polymer nanocomposites, Nat. Nanotechnol, 3, 327, 10.1038/nnano.2008.96

Rohini, 2015, Tailoring the interface in graphene / thermoset polymer composites : a critical review, Polymer (Guildf), 70, A17, 10.1016/j.polymer.2015.06.016

Compton, 2011, Chemically active reduced graphene oxide with tunable C/O ratios, ACS Nano, 5, 4380, 10.1021/nn1030725

Liu, 2014, Synthesis and characterization of graphene and carbon nanotubes: a review on the past and recent developments, J. Ind. Eng. Chem., 20, 1171, 10.1016/j.jiec.2013.08.028

Abdullah, 2015, Mechanical properties of graphene oxide (GO)/epoxy composites, HBRC J., 11, 151, 10.1016/j.hbrcj.2014.06.001

Y. Zhong, Z. Zhen, H. Zhu, Graphene: fundamental research and potential applications, FlatChem. (2017). doi:10.1016/j.flatc.2017.06.008.

Zhang, 2017, Advanced review of graphene-based nanomaterials in drug delivery systems: synthesis, modification, toxicity and application, Mater. Sci. Eng. C., 77, 1363, 10.1016/j.msec.2017.03.196

Allen, 2009, Honeycomb carbon – a study of graphene, Am. Chem. Soc., 184

Justino, 2017, Graphene based sensors and biosensors, TrAC Trends Anal. Chem., 91, 53, 10.1016/j.trac.2017.04.003

Huang, 2017, Efficient interfacial interaction for improving mechanical properties of polydimethylsiloxane nanocomposites filled with low content of graphene oxide nanoribbons, RSC Adv., 7, 22045, 10.1039/C7RA02439H

Bafekrpour, 2012, Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites, Mater. Sci. Eng. A., 545, 123, 10.1016/j.msea.2012.02.097

Tang, 2013, Graphene? Epoxy composite electrode fabricated by in situ polycondensation for enhanced amperometric detection in capillary electrophoresis, J. Chromatogr. A., 1316, 127, 10.1016/j.chroma.2013.09.077

Gupta, 2015, Sensors and actuators B : chemical graphene – metal oxide nanohybrids for toxic gas sensor : a review, Sens. Actuators B. Chem., 221, 1170, 10.1016/j.snb.2015.07.070

Ryu, 2014, Study on the effect of hexamethylene diamine functionalized graphene oxide on the curing kinetics of epoxy nanocomposites, Eur. Polym. J., 52, 88, 10.1016/j.eurpolymj.2013.12.014

Wang, 2013, Attapulgite? Graphene oxide hybrids as thermal and mechanical reinforcements for epoxy composites, Compos. Sci. Technol., 87, 29, 10.1016/j.compscitech.2013.08.002

Ferreira, 2016, Functionalization of carbon nanotube and applications, 31

Phiri, 2017, General overview of graphene: production, properties and application in polymer composites, Mater. Sci. Eng. B., 215, 9, 10.1016/j.mseb.2016.10.004

Cividanes, 2017, How Do CNT affect the branch and crosslink reactions in CNT-epoxy, Mater. Res. Express., 4, 10.1088/2053-1591/aa8d31

Chatterjee, 2012, Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites, Chem. Phys. Lett., 531, 6, 10.1016/j.cplett.2012.02.006

Ribeiro, 2015, Multifunctional nanocomposites based on tetraethylenepentamine-modified graphene oxide/epoxy, Polym. Test., 43, 182, 10.1016/j.polymertesting.2015.03.010

Wan, 2014, Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties, Carbon N. Y., 69, 467, 10.1016/j.carbon.2013.12.050

Wan, 2014, Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide, Compos. A Appl. Sci. Manuf., 64, 79, 10.1016/j.compositesa.2014.04.023

Zang, 2015, Fracture behaviors of TRGO-filled epoxy nanocomposites with different dispersion/interface levels, Macromol. Mater. Eng., 300, 737, 10.1002/mame.201400437

Guan, 2014, Toward effective and tunable interphases in graphene oxide/epoxy composites by grafting different chain lengths of polyetheramine onto graphene oxide, J. Mater. Chem. A., 2, 15058, 10.1039/C4TA02429J

Gong, 2016, Polymer grafted reduced graphene oxide sheets for improving stress transfer in polymer composites, Compos. Sci. Technol., 134, 144, 10.1016/j.compscitech.2016.08.014

Alam, 2016, Evolution of functionalized multi-walled carbon nanotubes by dendritic polymer coating and their anti-scavenging behavior during curing process, Mater. Lett., 167, 58, 10.1016/j.matlet.2015.12.130

Hummers, 1958, Preparation of graphitic oxide, J. Am. Chem. Soc., 80, 1339, 10.1021/ja01539a017

Beg, 2015, Improvement of interaction between pre-dispersed multi-walled carbon nanotubes and unsaturated polyester resin, J. Nanoparticle Res., 17, 53, 10.1007/s11051-014-2846-8

Alam, 2017, Microstructure and fractography of multiwalled carbon nanotube reinforced unsaturated polyester nanocomposites, Polym. Compos., 38, E462, 10.1002/pc.23911

Ferreira, 2016

Vukovic, 2009, Synthesis, characterization and cytotoxicity of surface amino-functionalized water-dispersible multi-walled carbon nanotubes, Appl. Surf. Sci., 255, 8067, 10.1016/j.apsusc.2009.05.016

Ferreira, 2015, Carbon nanotube functionalized with dodecylamine for the effective dispersion in solvents, Appl. Surf. Sci., 357, 2154, 10.1016/j.apsusc.2015.09.202

Ferreira, 2017, Functionalized cellulose nanocrystals as reinforcement in biodegradable polymer nanocomposites, Polym. Compos.

Li, 2014, Synthesis and characterizations of graphene–copper nanocomposites and their antifriction application, J. Ind. Eng. Chem., 20, 2043, 10.1016/j.jiec.2013.09.029

Gu, 2016, Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity, Int. J. Heat Mass Transf., 92, 15, 10.1016/j.ijheatmasstransfer.2015.08.081

Liu, 2014, Microwave-assisted synthesis of MoS2/graphene nanocomposites for efficient hydrodesulfurization, Fuel, 119, 163, 10.1016/j.fuel.2013.11.045

Cividanes, 2013, Cure study of epoxy resin reinforced with multiwalled carbon nanotubes by Raman and luminescence spectroscopy, J. Appl. Polym. Sci., 127, 544, 10.1002/app.37815

Pinheiro, 2017, Mechanical, rheological and degradation properties of PBAT nanocomposites reinforced by functionalized cellulose nanocrystals, Eur. Polym. J., 97, 356, 10.1016/j.eurpolymj.2017.10.026

Yang, 2015, One-step amine modification of graphene oxide to get a green trifunctional metal-free catalyst, Appl. Surf. Sci., 346, 443, 10.1016/j.apsusc.2015.04.033

Ryu, 2014, Improvement of the mechanical and electrical properties of polyamide 6 nanocomposites by non-covalent functionalization of multi-walled carbon nanotubes, Compos. Sci. Technol., 102, 169, 10.1016/j.compscitech.2014.07.022

Pan, 2014, Amine-functional magnetic polymer modified graphene oxide as magnetic solid-phase extraction materials combined with liquid chromatography? Tandem mass spectrometry for chlorophenols analysis in environmental water, J. Chromatogr. A, 1362, 34, 10.1016/j.chroma.2014.08.027

Maio, 2015, A novel approach to prevent graphene oxide re-aggregation during the melt compounding with polymers, Compos. Sci. Technol., 119, 131, 10.1016/j.compscitech.2015.10.006

Dresselhaus, 2005, Raman spectroscopy of carbon nanotubes, Phys. Rep., 409, 47, 10.1016/j.physrep.2004.10.006

Schniepp, 2006, Functionalized single graphene sheets derived from splitting graphite oxide, J. Phys. Chem. B., 110, 8535, 10.1021/jp060936f

Mittal, 2015, A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites, J. Ind. Eng. Chem., 21, 11, 10.1016/j.jiec.2014.03.022

Kudin, 2008, Raman spectra of graphite oxide and functionalized graphene sheets, Nano Lett, 8, 36, 10.1021/nl071822y

Xue, 2015, Facile functionalization of graphene oxide with ethylenediamine as a solid base catalyst for Knoevenagel condensation reaction, Catal. Commun., 64, 105, 10.1016/j.catcom.2015.02.003

Ferreira, 2016, Correlation of surface treatment, dispersion and mechanical properties of HDPE/CNT nanocomposites, Appl. Surf. Sci., 389, 921, 10.1016/j.apsusc.2016.07.164

Soares, 2014, Surface modification of carbon black nanoparticles by dodecylamine: thermal stability and phase transfer in brine medium, Carbon N. Y., 72, 287, 10.1016/j.carbon.2014.02.008

Park, 2008, Graphene oxide papers modified by divalent ions? Enhancing mechanical properties via chemical cross-linking, ACS Nano, 2, 572, 10.1021/nn700349a

D.G.D. Galpaya, J.F.S. Fernando, L. Rintoul, N. Motta, E.R. Waclawik, C. Yan, G.A. George, The effect of graphene oxide and its oxidized debris on the cure chemistry and interphase structure of epoxy nanocomposites, Polymer (Guildf). 71 (2015) 122–134. doi:10.1016/j.polymer.2015.06.054.

Dazzi, 2012, AFM-IR: combining atomic force microscopy and infrared spectroscopy for nanoscale chemical characterization, Appl. Spectrosc., 66, 1365, 10.1366/12-06804

Dazzi, 2016, AFM-IR: technology and applications in nanoscale infrared spectroscopy and chemical imaging, Chem. Rev., 6b00448

Ashori, 2015, Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites, Polym. Test., 48, 82, 10.1016/j.polymertesting.2015.09.010

Shanmugharaj, 2013, Synthesis, characterization, and surface wettability properties of amine functionalized graphene oxide films with varying amine chain lengths, J. Colloid Interface Sci., 401, 148, 10.1016/j.jcis.2013.02.054

Zhang, 2013, Strengthened magnetic epoxy nanocomposites with protruding nanoparticles on the graphene nanosheets, Polymer (Guildf), 54, 3594, 10.1016/j.polymer.2013.04.062

Ferreira, 2017, Dodecylamine functionalization of carbon nanotubes to improve dispersion, thermal and mechanical properties of polyethylene based nanocomposites, Appl. Surf. Sci., 410, 267, 10.1016/j.apsusc.2017.03.098

Ruan, 2003, Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes, Polymer (Guildf), 44, 5643, 10.1016/S0032-3861(03)00628-1

Huang, 2004, Characterization of LLDPE/nano-SiO2 composites by solid-state dynamic mechanical spectroscopy, Polym. Test., 23, 9, 10.1016/S0142-9418(03)00048-5

Ferreira, 2017, Influence of carbon nanotube concentration and sonication temperature on mechanical properties of HDPE/CNT nanocomposites, Fullerenes, Nanotube, Carbon Nanostruct, 25, 531, 10.1080/1536383X.2017.1359553

Ferreira, 2017, An overview on properties and applications of poly(butylene adipate- co -terephthalate)-PBAT based composites, Polym. Eng. Sci.

Fiore, 2014, Static and dynamic mechanical properties of Arundo Donax fillers-epoxy composites, Mater. Des., 57, 456, 10.1016/j.matdes.2014.01.025

Rahman, 2012, Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubes, Polym. Test., 31, 777, 10.1016/j.polymertesting.2012.05.006

Shanmugam, 2013, Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf stalk fiber/jute fiber reinforced hybrid polyester composites, Mater. Des., 50, 533, 10.1016/j.matdes.2013.03.048

Martenez-Hern?ndez, 2007, Dynamical-mechanical and thermal analysis of polymeric composites reinforced with keratin biofibers from chicken feathers, Compos. Part B Eng., 38, 405, 10.1016/j.compositesb.2006.06.013

Francisco, 2015, Functionalization of multi-walled carbon nanotube and mechanical property of epoxy-based nanocomposite, J. Aerosp. Technol. Manag., 7, 289, 10.5028/jatm.v7i3.485