Full-scale testing of space steel frame subjected to proportional loads

Clarke, 1992, Benchmarking and verification of second-order elastic and inelastic frame analysis programs Vogel, 1985, Calibrating frames, Stahlbau, 10, 1 Chen, 1997 Kim, 2001, Practical advanced analysis for semi-rigid space frames, Solids Struct, 38, 9111, 10.1016/S0020-7683(01)00141-X Kim, 2002, 3-D second-order plastic-hinge analysis accounting for lateral torsional buckling, Solids Struct, 39, 2109, 10.1016/S0020-7683(02)00082-3 Kim, 2001, Direct design of three-dimensional frames using practical advanced analysis, Eng Struct, 23, 1491, 10.1016/S0141-0296(01)00041-4 Liew, 2000, Improved nonlinear plastic hinge analysis of space frame structures, Eng Struct, 22, 1324, 10.1016/S0141-0296(99)00085-1 Kanchanalai T. The design and behavior of beam-columns in unbraced steel frames. AISI project no. 189, report no. 2, Civil Engineering/Structures Research Lab., University of Texas at Austin 1997. Yarimci E. Incremental inelastic analysis of framed structures and some experimental verification. Ph.D. dissertation, Department of Civil Engineering, Lehigh University, Bethlehem, PA, 1966. Avery, 2000, Large-scale testing of steel frame structures comprising non-compact sections, Eng Struct, 22, 920, 10.1016/S0141-0296(99)00039-5 Wakabayashi, 1972, Elastic-plastic behaviors of full size steel frame, Trans. Arch. Inst Jpn, 198, 7, 10.3130/aijsaxx.198.0_7 Harrison HB. The application of the principles of plastic analysis to three dimentional steel structures. Ph.D thesis, Department of Civil Engineering, University of Sydney, 1964. ECCS. Ultimate limit state calculation of away frames with rigid joints. Technical Committee 8-Structural Stability Technical Working Group 8.2-System. Publication no. 33. European Convention for Constructional Steelwork 1984. Kim, 2002, Second-order distributed plasticity analysis of space steel frames, Eng Struct, 24, 735, 10.1016/S0141-0296(01)00136-5