Full-field measurements for determining orthotropic elastic parameters of woven glass-epoxy composites using off-axis tensile specimens

Springer Science and Business Media LLC - Tập 38 - Trang 61-71 - 2017
P. Pollock1, L. Yu1, M. A. Sutton1, S. Guo1, P. Majumdar1, M. Gresil1
1Department of Mechanical Engineering, University of South Carolina, Columbia, USA

Tóm tắt

Using theoretical formulations to describe the general response of an orthogonally woven glass-epoxy composite subjected to off-axis tension loading, a simple experimental methodology incorporating stereovision and 3D digital image correlation (3D-DIC) into several optimization procedures is described that provides a direct approach for quantitatively determining all of the elastic properties. During each off-axis tensile loading experiment, axial strains are determined using both mechanical extensometry and 3D-DIC, with the 3D-DIC measurements also used to extract both the in-plane transverse normal strain and the shear strain fields. The effectiveness of various optimization procedures are then evaluated and compared by performing a series of off-axis tensile loading experiments to determine the material engineering constants, including E1, E2, G12, and v12 for the nominally transversely isotropic material. Results indicate excellent agreement between the extensometer measurements and the average axial strain obtained by 3D-DIC. Furthermore, direct comparison of the proposed optimization methods indicates that each method is robust and effective, especially when employing 3D-DIC to extract additional information to complete the elastic property characterization procedure.

Tài liệu tham khảo

Ogihara, S., and Reifsnider, K., “Characterization of Nonlinear Behavior in Woven Composite Laminates,” Applied Composite Materials 9(4):249–263 (2002). Tamuzs, V., Dzelzitis, K., and Reifsnider, K., “Fatigue of Woven Composite Laminates in Off-Axis Loading. I. The Mastercurves,” Applied Composite Materials 11(5):259–279 (2004). Xing, L., Reifsnider, K.L., and Huang, X., “Progressive Damage Modeling for Large Deformation Loading of Composite Structures,” Composites Science and Technology 69(6, Sp. Iss. SI):780–784 (2009). Reddy, J.N., An Introduction to Continuum Mechanics. Cambridge Press, New York (2008). Jones, R.M., Mechanics of Composite Materials. McGraw Hill, New York (1975). McNeill, S.R., Sutton, M.A., Wolters, W.J., Peters, W.H. III, and Ranson, W.F., “Determination of Displacements Using an Improved Digital Correlation Method,” Image and Vision Computing 1(3):1333–1339 (1983). Sutton, M.A., “Chapter 21 on Digital Image Correlation,” Sharpe, W. (ed), Handbook of Experimental Solid Mechanics. ISBN 978-0-387-26883-5, Springer, New York (2008). Sutton, M.A., Orteu, J.J., and Schreier, H.W., Image Correlation for Shape, Motion and Deformation Measurements. ISBN 978-0-387-78746-6. Springer (2009). Coleman, T.F., and Li, Y., “An Interior, Trust Region Approach for Nonlinear Minimization Subject to Bounds,” SIAM Journal on Optimization 6:418–445 (1996).