Fuel Oil Production from Municipal Plastic Wastes in Sequential Pyrolysis and Catalytic Reforming Reactors

Energy Procedia - Tập 47 - Trang 180-188 - 2014
Mochamad Syamsiro1,2, Harwin Saptoadi3, Tinton Norsujianto3, Putri Noviasri1,3, Shuo Cheng1, Z.A. Zainal4, Kunio Yoshikawa1
1Department of Environmental Science and Technology, Tokyo Institute of Technology, G5-8, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
2Department of Mechanical Engineering, Janabadra University, Jalan TR Mataram 57, Yogyakarta 55231, Indonesia
3Department of Mechanical and Industrial Engineering, Gadjah Mada University, Jalan Grafika 2, Yogyakarta 55281, Indonesia
4School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia

Tóm tắt

Từ khóa


Tài liệu tham khảo

UNEP. Converting waste plastics into resource: Compendium of technologies. In: United Nations Environment Programme. Osaka; 2009.

Dewi NK. Indonesia‘s plastics industry in 2012: Challenges from raw materials and exchange rates. In: Indonesia Update. Bank Mandiri. Jakarta; 2012. p. 16-23.

Aguado, 2007, Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system, Journal of Analytical and Applied Pyrolysis, 79, 415, 10.1016/j.jaap.2006.11.008

Buekens, 1998, Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes, Resources, Conservation and Recycling, 23, 163, 10.1016/S0921-3449(98)00025-1

Aboulkas, 2010, Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanisms, Energy Conversion and Management, 51, 1363, 10.1016/j.enconman.2009.12.017

Miskolczi, 2012, Hydrocarbons obtained by waste plastic pyrolysis: Comparative analysis of decomposition described by different kinetic models, Fuel Processing Technology, 104, 96, 10.1016/j.fuproc.2012.04.031

Hussain, 2012, The conversion of waste polystyrene into useful hydrocarbons by microwave- metal interaction pyrolysis, Fuel Processing Technology, 94, 145, 10.1016/j.fuproc.2011.10.009

Bagri, 2002, Catalytic pyrolysis of polyethylene, Journal of Analytical and Applied Pyrolysis, 63, 29, 10.1016/S0165-2370(01)00139-5

Williams, 2004, Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis, International Journal of Energy Research, 28, 31, 10.1002/er.949

Wang, 2011, Catalytic pyrolysis of municipal plastic waste to fuel with nickel-loaded silica-alumina catalysts, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 33, 1940, 10.1080/15567030903436814

Miguel, 2009, Valorization of waste agricultural polyethylene film by sequential pyrolysis and catalytic reforming, Industrial & Engineering Chemistry Research, 48, 8697, 10.1021/ie900776w

BPPT. Final report Yogyakarta municipal waste utilization project. Jakarta: Badan Pengkajian dan Penerapan Teknologi; 2005.

Bhaskar, 2003, Comparison of thermal degradation products from real municipal waste plastic and model mixed plastics, Journal of Analytical and Applied Pyrolysis, 70, 579, 10.1016/S0165-2370(03)00027-5

Lee, 2009, Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes, Journal of Analytical and Applied Pyrolysis, 85, 372, 10.1016/j.jaap.2008.11.032

Demirbas, 2004, Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons, Journal of Analytical and Applied Pyrolysis, 72, 97, 10.1016/j.jaap.2004.03.001

Trisunaryanti, 1996, Characterization and modification of Indonesian natural zeolites and their properties for hydrocracking of a paraffin, Sekiyu Gakkaishi, 39, 20, 10.1627/jpi1958.39.20

Encinar, 2009, Catalytic pyrolysis of exhausted olive oil waste, Journal of Analytical and Applied Pyrolysis, 85, 197, 10.1016/j.jaap.2008.11.018

Williams, 1995, The influence of catalyst type on the composition of upgraded biomass pyrolysis oils, Journal of Analytical and Applied Pyrolysis, 31, 39, 10.1016/0165-2370(94)00847-T

Seo, 2003, Investigation of catalytic degradation of high-density polyethylene by hydrocarbon group type analysis, Journal of Analytical and Applied Pyrolysis, 70, 383, 10.1016/S0165-2370(02)00186-9

Park, 1999, Catalytic degradation of polyethylene over solid acid catalysts, Polymer Degradation and Stability, 65, 193, 10.1016/S0141-3910(99)00004-X

Lei, 2011, Microwave pyrolysis of distillers dried grain with solubles (DDGS) for biofuel production, Bioresource Technology, 102, 6208, 10.1016/j.biortech.2011.02.050

Hansen, 2005, Ethanol-diesel fuel blends - A review, Bioresource Technology, 96, 277, 10.1016/j.biortech.2004.04.007

Syamsiro, 2013, Co-production of liquid and gaseous fuels from polyethylene and polystyrene in a continuous sequential pyrolysis and catalytic reforming system, Energy and Environment Research, 3, 90, 10.5539/eer.v3n2p90

Sheng, 2005, Estimating the higher heating value of biomass fuels from basic analysis data, Biomass and Bioenergy, 28, 499, 10.1016/j.biombioe.2004.11.008

Demirbas, 2007, Effects of moisture and hydrogen content on the heating value of fuels, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 29, 649, 10.1080/009083190957801