Friction stir welding of carbon black reinforced high-density polyethylene tube-to-tubesheet joints

T'Joen, 2009, A review on polymer heat exchangers for HVAC&R applications, Int. J. Refrig., 32, 763, 10.1016/j.ijrefrig.2008.11.008 Deisenroth, 2018, Review of heat exchangers enabled by polymer and polymer composite additive manufacturing, Heat Tran. Eng., 39, 1652, 10.1080/01457632.2017.1384280 Hussain, 2017, Review of polymers for heat exchanger applications: factors concerning thermal conductivity, Appl. Therm. Eng., 113, 1118, 10.1016/j.applthermaleng.2016.11.041 Pereira, 2021, Effect of friction stir welding techniques and parameters on polymers joint efficiency—a critical review, Polymers, 13, 2056, 10.3390/polym13132056 Nath, 2021, A novel double-side welding approach for friction stir welding of polypropylene plate, Int. J. Adv. Manuf. Technol., 113, 691, 10.1007/s00170-021-06602-9 Kumar, 2021, Friction stir welding of glass filled Nylon 6 composite sheets using double step shoulder tool, 2511 Sahu, 2021, Parametric study on joint quality in friction stir welding of polycarbonate, 1275 Inaniwa, 2013, Application of friction stir welding for several plastic materials, 137 Strand, 2003, Joining plastics - can friction stir welding compete?, 321 Mourad, 2014, Study on the mechanical behavior of aluminum alloy 5083 friction stir welded joint Sabry, 2019, Friction stir welding of T-joints: experimental and statistical analysis, J. Manuf. Mater. Process, 3, 38 El-Kassas, 2019, Characteristics of potential sources - vertical force, torque and current on penetration depth for quality assessment in friction stir welding of AA 6061 pipes, Int. Rev. Aerosp. Eng., 12, 195 Afrin, 2008, Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy, Mater. Sci. Eng., 472, 179, 10.1016/j.msea.2007.03.018 Fujii, 2006, Friction stir welding of carbon steels, Mater. Sci. Eng., 429, 50, 10.1016/j.msea.2006.04.118 Chen, 2018, Effects of pin thread on the in-process material flow behavior during friction stir welding: a computational fluid dynamics study, Int. J. Mach. Tool Manufact., 124, 12, 10.1016/j.ijmachtools.2017.09.002 Joshi, 2023, Effect of post-weld heat treatment on mechanical properties and fatigue crack growth behaviour of friction stir welded 7075-T651 Al alloy, Theor. Appl. Fract. Mech., 123, 10.1016/j.tafmec.2022.103714 Xu, 2023, Enhanced strength and ductility of rapid cooling friction stir welded ultralight Mg–14Li–1Al alloy joint, J. Mater. Res. Technol., 23, 4444, 10.1016/j.jmrt.2023.02.083 Wei, 2019, Butt joining of bi-layered aluminum sheets through friction stir welding: tensile stresses, bending stresses, residual stresses, and fractrography, Metals, 9, 384, 10.3390/met9040384 Iftikhar, 2021, A comprehensive review on optimal welding conditions for friction stir welding of thermoplastic polymers and their composites, Polymers, 13, 1208, 10.3390/polym13081208 Iftikhar, 2020, An overview of friction stir welding of high-density polyethylene Iftikhar, 2022, Numerical modeling of friction stir welding of thermoplastic materials - an overview Afshari, 2023, Friction stir welding of polypropylene based graphene nanocomposites fabricated with 3-D printing: an investigation on the microstructure and mechanical properties, J. Compos. Mater., 57, 1523, 10.1177/00219983231158592 Samadi, 2023, An investigation on the friction stir welding of PP/TiO2 nanocomposites for improving the tensile strength and hardness of the weld joint, Colloid Polym. Sci., 301, 465, 10.1007/s00396-023-05080-7 Mourad, 2010, Fracture behaviour of friction stir spot welded joint, 205 Khan, 2007, Resistance and friction stir spot welding of DP600: a comparative study, Sci. Technol. Weld. Join., 12, 175, 10.1179/174329307X159801 Yin, 2010, Influence of tool design on mechanical properties of AZ31 friction stir spot welds, Sci. Technol. Weld. Join., 15, 81, 10.1179/136217109X12489665059384 Yan, 2017, Effects of friction stir spot welding parameters on morphology and mechanical property of modified cast nylon 6 joints produced by double-pin tool, Int. J. Adv. Manuf. Technol., 92, 2511, 10.1007/s00170-017-0306-1 Paoletti, 2016, Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers, Int. J. Adv. Manuf. Technol., 83, 1395, 10.1007/s00170-015-7669-y Singla, 2023, Magnesium-based nanocomposites synthesized using friction stir processing: an experimental study, Mater. Manuf. Process., 10.1080/10426914.2023.2195909 Qiao, 2021, Mg/ZrO2 metal matrix nanocomposites fabricated by friction stir processing: microstructure, mechanical properties, and corrosion behavior, Front. Bioeng. Biotechnol., 9, 10.3389/fbioe.2021.605171 Khan, 2018, Fabrication of UHMW polyethylene/nano-hydroxyapatite biocomposite via heat-assisted friction stir processing, Int. J. Adv. Manuf. Technol., 96, 3651, 10.1007/s00170-018-1816-1 Almasi, 2020, Fabrication of a novel hydroxyapatite/polyether ether ketone surface nanocomposite via friction stir processing for orthopedic and dental applications, Prog. Biomater., 9, 35, 10.1007/s40204-020-00130-7 Senthil Kumaran, 2010, Optimization of friction welding of tube to tube plate using an external tool, Struct. Multidiscip. Optim., 42, 449, 10.1007/s00158-010-0509-7 Deepesh, 2020, Studies on the role of total welding rotation in friction welding of tube-to-tube plate using an external tool, J. Manuf. Process., 53, 110, 10.1016/j.jmapro.2020.02.004 Thekkuden, 2023, Friction stir weld processing for achieving maximum tube-to-tubesheet leak path, Mater. Manuf. Process., 38, 1455, 10.1080/10426914.2023.2176874 Iftikhar, 2022, Friction stir welding of tube-to-tubesheets for thermoplastic shell and tube heat exchangers, Manuf. Lett., 34, 82, 10.1016/j.mfglet.2022.09.009 Sheikh-Ahmad, 2022, Effect of process temperatures on material flow and weld quality in the friction stir welding of high density polyethylene, J. Mater. Res. Technol., 18, 1692, 10.1016/j.jmrt.2022.03.082 Benyerou, 2021, Parametric study of friction stir spot welding (FSSW) for polymer materials case of high density polyethylene sheets: experimental and numerical study, Frat. Ed. Integrità Strutt., 15, 145 Rehman, 2021, Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene, Int. J. Adv. Manuf. Technol., 117, 455, 10.1007/s00170-021-07740-w Zafar, 2016, Investigating friction stir welding on thick nylon 6 plates, Weld. J., 95, 210s Adibeig, 2020, Experimental and numerical study of polyethylene hybrid joints: friction stir spot welded joints reinforced with adhesive, Int. J. Adhesion Adhes., 98, 10.1016/j.ijadhadh.2020.102555 Kumar, 2020, Thermo-mechanical investigations for the joining of thermoplastic composite structures via friction stir spot welding, Compos. Struct., 253, 10.1016/j.compstruct.2020.112772 Nateghi, 2016, Experimental investigation into effect of cooling of traversed weld nugget on quality of high-density polyethylene joints, Int. J. Adv. Manuf. Technol., 84, 581, 10.1007/s00170-015-7663-4 Mert, 2011, Design of optimal joining for friction stir spot welding of polypropylene sheets, Sci. Technol. Weld. Join., 16, 522, 10.1179/1362171811Y.0000000034 Dashatan, 2013, Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets, Mater. Des., 45, 135, 10.1016/j.matdes.2012.08.071 Gao, 2014, Submerged friction stir weld of polyethylene sheets, J. Appl. Polym. Sci., 131, 10.1002/app.41059 Yan, 2018, Friction stir spot welding ABS using triflute-pin tool: effect of process parameters on joint morphology, dimension and mechanical property, J. Manuf. Process., 32, 269, 10.1016/j.jmapro.2018.02.015 Gao, 2016, Microstructure and tensile properties of dissimilar submerged friction stir welds between HDPE and ABS sheets, Int. J. Adv. Manuf. Technol., 87, 919, 10.1007/s00170-016-8539-y Vidakis, 2022, Friction stir welding optimization of 3D-printed acrylonitrile butadiene styrene in hybrid additive manufacturing, Polymers, 14, 2474, 10.3390/polym14122474 Husain, 2015, Mechanical properties of friction-stir-welded polyamide sheets, Int. J. Mech. Mater. Eng., 10, 1, 10.1186/s40712-015-0047-6 Adibeig, 2018, Experimental investigation of tensile strength of friction stir welded butt joints on PMMA, Mater. Today Commun., 17, 238, 10.1016/j.mtcomm.2018.09.009 Senthil, 2022, Effect of tool rotational speed and traverse speed on friction stir welding of 3D-printed polylactic acid material, Appl. Sci. Eng. Prog., 15 Abdulrehman, 2023, Studying the mechanical properties of high-density polyethylene polymeric plates by friction Stir welding by adding copper oxide nanoparticles, Meas. Sensors., 27, 10.1016/j.measen.2023.100770 Bilici, 2012, Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene, Mater. Des., 35, 113, 10.1016/j.matdes.2011.08.033 Gao, 2016, Investigations for the mechanical, macro-, and microstructural analyses of dissimilar submerged friction stir welding of acrylonitrile butadiene styrene and polycarbonate sheets, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 230, 1213, 10.1177/0954405415572663 Yan, 2017, Influences of friction stir welding parameters on morphology and tensile strength of high density polyethylene lap joints produced by double-pin tool, J. Manuf. Process., 28, 33, 10.1016/j.jmapro.2017.05.019 Kaştan, 2023, Investigation of welding defects in friction stir spot welding of plastics, J. Elastomers Plast., 55, 457, 10.1177/00952443231158779 Arici, 2008, Friction stir spot welding of polypropylene, J. Reinforc. Plast. Compos., 27, 2001, 10.1177/0731684408089134 Bilici, 2011, The optimization of welding parameters for friction stir spot welding of high density polyethylene sheets, Mater. Des., 32, 4074, 10.1016/j.matdes.2011.03.014 Singh, 2021, PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding, J. Thermoplast. Compos. Mater., 34, 745, 10.1177/0892705719850609 Tasdemir, 2016, Relation between friction stir spot welding parameters and mechanical properties of high density polyethylene/glass spheres polymer composites, Mater. Sci. Forum, 860, 49, 10.4028/www.scientific.net/MSF.860.49 Sheikh-Ahmad, 2019, Friction stir welding of high density polyethylene—carbon black composite, J. Mater. Process. Technol., 264, 402, 10.1016/j.jmatprotec.2018.09.033 Sun, 2023, Study on the thermal-assisted underwater friction stir lap welding for thermoplastic PC, Mater. Lett., 333, 10.1016/j.matlet.2022.133571 Lambiase, 2020, Friction stir welding and friction spot stir welding processes of polymers-state of the art, Materials, 13, 2291, 10.3390/ma13102291 Moreno-Moreno, 2018, Mechanical and thermal properties of friction-stir welded joints of high density polyethylene using a non-rotational shoulder tool, Int. J. Adv. Manuf. Technol., 97, 2489, 10.1007/s00170-018-2102-y Mandelkern, 2007, Thermodynamic quantities governing melting, 165 Al-Bayaty, 2020, Study of thermal degradation kinetics of high density polyethlyene (HDPE) by using TGA technique, 10.1063/5.0027503 Khan, 2016, 2D carbon fiber reinforced high density polyethylene multi-layered laminated composite panels: structural, mechanical, thermal, and morphological profile, J. Mater. Sci. Technol., 32, 1077, 10.1016/j.jmst.2016.06.011 Sahu, 2019, Influence of U.V light on the thermal properties of HDPE/Carbon black composites, Case Stud. Therm. Eng., 15, 10.1016/j.csite.2019.100534 Rajandas, 2012, A novel FTIR-ATR spectroscopy based technique for the estimation of low-density polyethylene biodegradation, Polym. Test., 31, 1094, 10.1016/j.polymertesting.2012.07.015 Gardette, 2013, Photo- and thermal-oxidation of polyethylene: comparison of mechanisms and influence of unsaturation content, Polym. Degrad. Stabil., 98, 2383, 10.1016/j.polymdegradstab.2013.07.017