Friction instability induced by iron and iron oxides on friction material surface

Severin, 2001, Friction mechanism in industrial brakes, Wear, 249, 771, 10.1016/S0043-1648(01)00806-7 Spurr, 1961, A theory of brake squeal, Proc. Inst. Mech. Eng.: Automob. Div., 15, 33 Nishiwaki, 1993, Generalized theory of brake noise, ARCHIVE: Proc. Inst. Mech. Eng. Part D: J. Automob. Eng., 207, 195, 10.1243/PIME_PROC_1993_207_180_02 Kinkaid, 2003, Automotive disc brake squeal, J. Sound Vib., 267, 105, 10.1016/S0022-460X(02)01573-0 Hoffmann, 2002, A minimal model for studying properties of the mode-coupling type instability in friction induced oscillations, Mech. Res. Commun., 29, 197, 10.1016/S0093-6413(02)00254-9 Fisher, 1970, Brake system component dynamic performance measurement and analysis, SAE Int. Duffour, 2004, Instability of systems with a frictional point contact. Part 1: basic modelling, J. Sound Vib., 271, 365, 10.1016/j.jsv.2003.02.002 Sherif, 1991, Effect of contact stiffness on the establishment of self-excited vibrations, Wear, 141, 227, 10.1016/0043-1648(91)90270-5 Fuadi, 2008, Effect of contact stiffness on creep-groan occurrence on a simple caliper-slider experimental model, Tribol. Lett., 33, 169, 10.1007/s11249-008-9404-4 Lee, 2013, The correlation between contact stiffness and stick-slip of brake friction materials, Wear, 302, 1414, 10.1016/j.wear.2012.12.017 Eriksson, 2002, On the nature of tribological contact in automotive brakes, Wear, 252, 26, 10.1016/S0043-1648(01)00849-3 Massi, 2008, Contact surface topography and system dynamics of brake squeal, Wear, 265, 1784, 10.1016/j.wear.2008.04.049 Persson, 2005, On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion, J. Phys. Condens. Matter, 17, R1, 10.1088/0953-8984/17/1/R01 Park, 2017, The effect of material properties on the stick–slip behavior of polymers: a case study with PMMA, PC, PTFE, and PVC, Wear, 378–379, 11, 10.1016/j.wear.2017.01.097 Johnson, 1971, Surface energy and the contact of elastic solids, Proc. R. Soc. Lond. A: Math. Phys. Eng. Sci., 324, 301, 10.1098/rspa.1971.0141 Shin, 2014, Effect of the abrasive size on the friction effectiveness and instability of brake friction materials: a case study with Zircon, Tribol. Lett., 55, 371, 10.1007/s11249-014-0361-9 Gweon, 2016, The effect of short glass fiber dispersion on the friction and vibration of brake friction materials, Wear, 362, 61, 10.1016/j.wear.2016.05.004 Park, 2014, Friction-induced stick-slip intensified by corrosion of gray iron brake disc, Wear, 309, 89, 10.1016/j.wear.2013.11.008 Shin, 2010, Friction instability induced by corrosion of gray iron brake discs, Tribol. Lett., 37, 149, 10.1007/s11249-009-9503-x Eriksson, 1999, Surface characterisation of brake pads after running under silent and squealing conditions, Wear, 232, 163, 10.1016/S0043-1648(99)00141-6 Lee, 2017 Lee, 2014 M. Sriwiboon, et al., Influence of Formulation and Process Modifications on Brake Friction, Wear and Squeal: Low-Copper NAOs and Importance of Disc Wear., SAE Technical Paper, 2014. H. Jang, et al., The effect of the composition and microstructure of gray cast iron on preferential wear during parasitic drag and on intrinsic damping capacity, SAE Technical Paper, 2003. Cho, 2003, Tribological study of gray cast iron with automotive brake linings: the effect of rotor microstructure, Tribol. Int., 36, 537, 10.1016/S0301-679X(02)00260-8 Österle, 2009, A comprehensive microscopic study of third body formation at the interface between a brake pad and brake disc during the final stage of a pin-on-disc test, Wear, 267, 781, 10.1016/j.wear.2008.11.023 Jang, 2013, Brake friction materials, 263 Hong, 2009, Wear mechanism of multiphase friction materials with different phenolic resin matrices, Wear, 266, 739, 10.1016/j.wear.2008.08.008 Kim, 2011, Friction and vibration of automotive brake pads containing different abrasive particles, Wear, 271, 1194, 10.1016/j.wear.2011.05.037 Rabinowicz, 1958, The intrinsic variables affecting the stick-slip process, Proc. Phys. Soc. Lond., 71, 668, 10.1088/0370-1328/71/4/316 Gao, 1994, The dynamic analysis of stick-slip motion, Wear, 173, 1, 10.1016/0043-1648(94)90251-8 Gao, 1993, Fundamentals of stick-slip, Wear, 162, 1139, 10.1016/0043-1648(93)90133-7 Tonazzi, 2013, Instability scenarios between elastic media under frictional contact, Mech. Syst. Signal Process., 40, 754, 10.1016/j.ymssp.2013.05.022 Tonazzi, 2014, Experimental and numerical analysis of frictional contact scenarios: from macro stick–slip to continuous sliding, Meccanica, 1 Mindlin, 1949, Compliance of elastic bodies in contacts, J. Appl. Mech., 82, 259, 10.1115/1.4009973 Sherif, 1991, Relationship between normal and tangential contact stiffness of nominally flat surfaces, Wear, 151, 49, 10.1016/0043-1648(91)90345-U Nakano, 2009, Stick-slip in sliding systems with tangential contact compliance, Tribol. Int., 42, 1771, 10.1016/j.triboint.2009.04.039 SUH, 1981, The genesis of friction, Wear, 69, 91, 10.1016/0043-1648(81)90315-X Good, 1993, Contact angle, wetting, and adhesion: a critical review, Contact Angle wettability Adhes., 3 Owens, 1969, Estimation of the surface free energy of polymers, J. Appl. Polym. Sci., 13, 1741, 10.1002/app.1969.070130815 Wenzel, 1949, Surface roughness and contact angle, J. Phys. Chem., 53, 1466, 10.1021/j150474a015 Eriksson, 2001, Friction behaviour and squeal generation of disc brakes at low speeds, Proc. Inst. Mech. Eng. Part D: J. Automob. Eng., 215, 1245, 10.1243/0954407011528789