Friction Stir Welding of Age-Hardenable Aluminum Alloys: A Parametric Approach Using RSM Based GRA Coupled With PCA

M. Grujicic, G. Arakere, B. Pandurangan, A. Hariharan, C.-F. Yen, B.A. Cheeseman, Development of a robust and cost-effective friction stir welding process for use in advanced military vehicles. J. Mater. Eng. Perform. 20, 11–23 (2013)

A. Astarita, A. Squillace, A. Scala Prisco, On the critical technological issues of friction stir welding T-joints of dissimilar aluminum alloys. J. Mater. Eng. Perform. 21, 1763–1771 (2012)

Zhihan Zhang, Wenya Li, Jinglong Li, Y.J. Chao, Numerical analysis of effect of backplate diffusivity on the transient temperature in friction stir welding. J. Mater. Eng. Perform. 22, 2446–2450 (2013)

Vijay Soundararajan, E.Y. Reddy, R. Kovacevic, Investigation of the friction stir lap welding of aluminum alloys AA 5182 and AA 6022. J. Mater. Eng. Perform. 16, 477–484 (2007)

W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. TempleSmith, C.J. Dawes, Friction stir butt welding, GB Patent No. 9125978.8, International Patent No. PCT/GB92/02203 (1991)

M.T. Milan, W.W. Bose Filho, J.R. Tarpani, A.M.S. Malafaia, C.P.O. Silva, B.C. Pellizer, L.E. Pereira, Residual stress evaluation of AA2024-T3 friction stir welded joints. J. Mater. Eng. Perform. 16, 86–92 (2007)

C. Vidal, V. Infante, Optimization of FS welding parameters for improving mechanical behavior of AA2024-T351 joints based on Taguchi method. JMEPEG 22, 2261–2270 (2013)

S. Lim, S. Kim, C.G. Lee, S. Kim, Tensile Behavior of friction stir-welded Al 6061-T651. Metall. Mater. Trans. A 35A, 2829–2835 (2004)

R.S. Mishra, Z.Y. Ma, Friction stir welding and processing. Mater. Sci. Eng. R 50, 1–78 (2005)

S.R. Ren, Z.Y. Ma, L.Q. Chen, Effect of welding parameters on tensile properties and fracture behavior of friction stir welded A–Mg–Si alloy. Scr. Mater 56, 69–72 (2007)

J.H. Ouyang, R. Kovacevic, Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys. J. Mater. Eng. Perform. 11, 51–63 (2002)

Krzysztof Mroczka, Anna Wojcicka, Adam Pietras, Characteristics of dissimilar FSW welds of aluminum alloys 2017A and 7075 on the basis of multiple layer research. J. Mater. Eng. Perform. 22, 2698–2705 (2013)

K. Ramanjaneyulu, G. Madhusudhan Reddy, A. Venugopal Rao, R. Markandeya, Structure–property correlation of AA2014 friction stir welds: role of tool pin profile. J. Mater. Eng. Perform. 22, 2224–2230 (2013)

S. Rajakumar, V. Balasubramanian, Multi-response optimization of friction-stir-welded AA1100 aluminum alloy joints. JMEPEG 21, 809–822 (2012)

R. Palanivel, P.K. Mathews, Prediction and optimization of process parameter of friction stir welded AA5083-H111 aluminum alloy using response surface methodology. J. Cent. South Univ. 19, 1–8 (2012)

S. Rajakumar, C. Muralidharan, V. Balasubramanian, Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075-T6 aluminium alloy. Proc. IME B. J. Eng. Manuf. 224, 1175–1802 (2010)

K.J. Colligan, Frictions stir welding for ship construction (Concurrent Technologies Corporation, Harrisburg, 2004), pp. 1–6

Sefika Kasman, Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111. Int. J. Adv. Manuf. Technol. 68, 805–815 (2013)

W.K. Kim, B.C. Goo, Si-t Won, Optimal design of friction stir welding process to improve tensile force of the joint of A 6005 extrusion. Mater. Manuf. Process. 25, 637–643 (2010)

Vijayan Sundaravel, R. Raju, S.R.K. Rao, Multi objective optimization of friction stir welding process parameters on aluminum alloy AA 5083 using Taguchi-based grey relation analysis. Mater. Manuf. Process. 25, 1206–1212 (2010)

S. Ciliberto, A. Astarita, A. Squillace, FSW of T joints in overlap configuration: process optimization in joining dissimilar aluminium alloys for the aeronautic, application. Surf. Interface Anal. 45(10), 1631–1637 (2013)

A.N. Siddiquee, Z.A. Khan, Z. Mallick, Grey relational analysis coupled with principal component analysis for optimization design of the process parameters in in-feed ceterless cylindrical grinding. Int. J. Adv. Manuf. Technol. 46, 983–992 (2010)

C.L. Lin, Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics. Mater. Manuf. Process. 19(2), 209–220 (2004)

H.S. Lu, C.K. Chung, N.C. Hwang, C.T. Chung, Grey relational analysis coupled with principal component analysis for optimization design of the cutting parameters in high speed milling. J. Mater. Process. Tech. 209, 3808–3817 (2009)

J.T. Huang, Y.S. Liao, Optimization of machining parameters of Wire–EDM based on grey relational and statistical analysis. Int. J. Prod. Res. 41(8), 1707–1720 (2003)

ASM handbook, volume 2—properties and selection: non ferrous alloys and special purpose materials (ASM international, Materials Park, 1990), p. 114

W.B. Lee, Y.M. Yeon, S.B. Jung, The improvement of mechanical properties of friction-stir-welded A356 Al alloy. Mater. Sci. Eng. A 355(1–2), 154–159 (2003)

K. Kalaiselvan, N. Murugan, Role of friction stir welding parameters on tensile strength of AA6061–B4C composite joints. Trans. Nonferrous Metals Soc. China 23(3), 616–624 (2013)

M. Jayaraman, V. Balasubramanian, Effect of process parameters on tensile strength of friction stir welded cast A356 aluminium alloy joints. Trans. Nonferrous Metals Soc. China 23(3), 605–615 (2013)

P. Biswas, D. A. Kumar, N. R. Mandal, Friction stir welding of aluminum alloy with varying tool geometry and process parameters, P I Mech. Eng. B-J Eng., 641–649 (2012)

S. Lomolino, R. Tovo, J. Dos Santos, On the fatigue behavior and design curves of friction stir butt welded Al alloys. Int. J. Fatigue 27, 305–316 (2005)

D.C. Montgomery, Design and Analysis of Experiments, 4th edn. (Wiley, New York, 1980)

User manual reference—Design expert, Stat-Ease, Inc., 2005

J.L. Deng, Introduction to grey system theory. J. Grey Syst. 1, 1–24 (1989)

M.K. Pradhan, C.K. Biswas, Multi-response optimisation of EDMAISID2 tool steel using response surface methodology. Int. J. Mach. Mach. Mater. 9, 66–85 (2011)

M.K. Pradhan, Estimating the effect of process parameters on surface integrity of EDM AISI D2 tool steel by response surface methodology coupled with grey relational analysis. Int. J. Adv. Manuf. Technol. 67, 2051–2062 (2013)

K. Pearson, On lines and planes of closest fit RO systems of points in space. Philos. Mag. Ser. 62, 559–572 (1901)

H. Hotelling, Analysis of a complex of statistical variables into principal components. J. Educ. Psychol. 24, 417–441 (1993)

S. Hwang, Y. Lee, K. Yang, Maximization of acetic acid production in partial acidogenesis of swine wastewater. Bio. Technol. Bio. Eng. 75, 521–529 (2001)

K. Elangovan, V. Balasubramanian, M. Valliappan, Influence of pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminum alloy. Int. J. Adv. Manuf. Technol. 38, 285–294 (2008)

A. Krishnamoorthy, S.R. Boopathy, K. Palanikumar, J.P. Davim, Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics. Measurement 45, 1286–1296 (2012)