Fretting-Corrosion Apparatus with Low Magnitude Micro-motion (≤ 5 µm) for Hip Implant Taper Junctions: Development and Preliminary Outcome

Geringer J, Forest B, Combrade P (2005) Fretting-corrosion of materials used as orthopaedic implants. Wear 259:943–951. https://doi.org/10.1016/j.wear.2004.11.027 Geringer J, Forest B, Combrade P (2006) Wear analysis of materials used as orthopaedic implants. Wear 261:971–979. https://doi.org/10.1016/j.wear.2006.03.022 Hoeppner DW, Chandrasekaran V (1994) Fretting in orthopaedic implants: a review. Wear 173:189–197. https://doi.org/10.1016/0043-1648(94)90272-0 Geringer J, Kim K, Boyer B (2011) Fretting corrosion in biomedical implants. Tribocorrosion Passive Met Coat. https://doi.org/10.1533/9780857093738.3.401 Gao J, Min J, Chen X, Yu P, Tan X, Zhang Q, Yu H (2021) Effects of two fretting damage modes on the dental implant–abutment interface and the generation of metal wear debris: an in vitro study. Fatigue Fract Eng Mater Struct 44:847–858. https://doi.org/10.1111/ffe.13399 S. Kurtz, K. Ong, E. Lau, F. Mowat, M. Halpern, Projections of primary and revision hip and knee arthroplasty in the United States from (2005) to 2030. J Bone Jt Surg Ser A 89(2007):780–785. https://doi.org/10.2106/JBJS.F.00222 Pabinger C, Geissler A (2014) Utilization rates of hip arthroplasty in OECD countries. Osteoarthritis Cartilage 22:734–741. https://doi.org/10.1016/j.joca.2014.04.009 Kremers HM, Larson DR, Crowson CS, Kremers WK, Washington RE, Steiner CA, Jiranek WA, Berry DJ (2014) Prevalence of total hip and knee replacement in the United States. J Bone Jt Surg 97:1386–1397. https://doi.org/10.2106/JBJS.N.01141 Crawford RW, Murray DW (1997) Total hip replacement: indications for surgery and risk factors for failure. Ann Rheum Dis 56:455–457. https://doi.org/10.1136/ard.56.8.455 Yu S, Saleh H, Bolz N, Buza J, Iorio R, Rathod PA, Schwarzkopf R, Deshmukh AJ (2020) Re-revision total hip arthroplasty: epidemiology and factors associated with outcomes. J Clin Orthop Trauma 11:43–46. https://doi.org/10.1016/j.jcot.2018.08.021 Kosashvili Y, Backstein D, Safir O, Lakstein D, Gross AE (2011) Dislocation and infection after revision total hip arthroplasty. Comparison between the first and multiply revised total hip arthroplasty. J Arthroplasty 26:1170–1175. https://doi.org/10.1016/j.arth.2011.04.022 Mathew MT, Jacobs JJ, Wimmer MA (2012) Wear-corrosion synergism in a cocrmo hip bearing alloy is influenced by proteins. Clin Orthop 470:3109–3117. https://doi.org/10.1007/s11999-012-2563-5 Mathew MT, Barão VA, Yuan JCC, Assunção WG, Sukotjo C, Wimmer MA (2012) What is the role of lipopolysaccharide on the tribocorrosive behavior of titanium? J Mech Behav Biomed Mater 8:71–85. https://doi.org/10.1016/j.jmbbm.2011.11.004 Mathew MT, Cheng K, Sun Y, Barao VAR (2023) The progress in tribocorrosion research (2010–21): focused on the orthopedics and dental implants. J Bio- Tribo-Corros 9:48. https://doi.org/10.1007/s40735-023-00767-4 Sun Y, Kinnerk K, Mirshed T, McNallan M, Mathew M (2023) In vitro tribocorrosion evaluation of carbide-derived carbon (CDC) for hip implants. Adv Appl Ceram Struct Funct Bioceram 122:236–249. https://doi.org/10.1080/17436753.2023.2241251 Ghadirinejad K, Day CW, Milimonfared R, Taylor M, Solomon LB, Hashemi R (2023) Fretting wear and corrosion-related risk factors in total hip replacement: a literature review on implant retrieval studies and national joint replacement registry reports. Prosthesis 5:774–791. https://doi.org/10.3390/prosthesis5030055 Rotella G, Cosco F, Saffioti MR, Umbrello D (2023) Evaluation of fretting corrosion fatigue in burnishing of Ti6Al4V component for artificial hip joint. CIRP Ann 72:509–512. https://doi.org/10.1016/j.cirp.2023.04.010 Mueller U, Bormann T, Schroeder S, Renkawitz T, Kretzer JP (2022) Taper corrosion in total hip arthroplasty – how to assess and which design features are crucial? J Mech Behav Biomed Mater 133:105307. https://doi.org/10.1016/j.jmbbm.2022.105307 Geringer J, Mathew M, Wimmer M, Macdonald DD (2013) Synergism effects during friction and fretting corrosion experiments - focusing on biomaterials used as orthopedic implants. Woodhead Publishing Limited. https://doi.org/10.1533/9780857092205.133 Landolt D, Mischler S (2011). Tribocorrosion of Passive Metals and Coatings. https://doi.org/10.1533/9780857093738 Brown SA, Eng D, Merritt K (1981) In vivo and in vitro considerations of corrosion testing. Biomater Med Dev Artif Organs 9:57–63. https://doi.org/10.3109/10731198109117601 Brown SA, Merritt K (1981) Fretting corrosion in saline and serum. J Biomed Mater Res 15:479–488. https://doi.org/10.1002/jbm.820150404 Brown SA, Hughes PJ, Merritt K (1988) In vitro studies of fretting corrosion of orthopaedic materials. J Orthop Res 6:572–579. https://doi.org/10.1002/jor.1100060415 Brown SA, Flemming CAC, Kawalec JS, Placko HE, Vassaux C, Merritt K, Payer JH, Kraay MJ (1995) Fretting corrosion accelerates crevice corrosion of modular hip tapers. J Appl Biomater 6:19–26. https://doi.org/10.1002/jab.770060104 Royhman D, Pourzal R, Hall D, Lundberg HJ, Wimmer MA, Jacobs J, Hallab NJ, Mathew MT (2021) Fretting-corrosion in hip taper modular junctions: The influence of topography and pH levels – an in-vitro study. J Mech Behav Biomed Mater 118:104443. https://doi.org/10.1016/j.jmbbm.2021.104443 Feyzi M, Fallahnezhad K, Taylor M, Hashemi R (2022) An overview of the stability and fretting corrosion of microgrooved necks in the taper junction of hip implants. Materials 15:8396. https://doi.org/10.3390/ma15238396 Dyrkacz RMR, Brandt JM, Morrison JB, Brien STO’, Ojo OA, Turgeon TR, Wyss UP (2014) Finite element analysis of the head-neck taper interface of modular hip prostheses. Tribol Int 91:1–8. https://doi.org/10.1016/j.triboint.2015.01.016 De Martino I, Assini JB, Elpers ME, Wright TM, Westrich GH (2015) Corrosion and fretting of a modular hip system: a retrieval analysis of 60 rejuvenate stems. J Arthroplasty 30:1470–1475. https://doi.org/10.1016/j.arth.2015.03.010 Royhman D, Patel M, Runa MJ, Jacobs JJ, Hallab NJ, Wimmer MA, Mathew MT (2015) Fretting-corrosion in hip implant modular junctions: new experimental set-up and initial outcome. Tribol Int 91:235–245. https://doi.org/10.1016/j.triboint.2015.04.032 Falkenberg A, Biller S, Morlock MM, Huber G (2020) Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors. J Biomech 98:109424. https://doi.org/10.1016/j.jbiomech.2019.109424 Bormann T, Müller U, Gibmeier J, Mai PT, Renkawitz T, Kretzer JP (2022) Insights into imprinting: how is the phenomenon of tribocorrosion at head-neck taper interfaces related to corrosion, fretting, and implant design parameters? Clin Orthop 480:1585–1600. https://doi.org/10.1097/CORR.0000000000002202 Bechstedt M, Gustafson JA, Mell SP, Gührs J, Morlock MM, Levine BR, Lundberg HJ (2020) Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers. J Biomech 103:109689. https://doi.org/10.1016/j.jbiomech.2020.109689 Miyoshi K, Pohlchuck B, Street KW, Zabinski JS, Sanders JH, Voevodin AA, Wu RLC (1999) Sliding wear and fretting wear of diamondlike carbon-based, functionally graded nanocomposite coatings. Wear 225–229:65–73. https://doi.org/10.1016/S0043-1648(98)00349-4 Miyoshi K, Lerch B, Draper S, Raj S (2008) Evaluation of Ti-48Al-2Cr-2Nb under fretting conditions, fretting fatigue. Adv Basic Underst Appl. https://doi.org/10.1520/stp10768s Miyoshi K, Sanders JH, Hager CH, Zabinski JS, Vander Wal RL, Andrews R, Street KW, Lerch BA, Abel PB (2008) Wear behavior of low-cost, lightweight TiC/Ti-6Al-4V composite under fretting: Effectiveness of solid-film lubricant counterparts. Tribol Int 41:24–33. https://doi.org/10.1016/j.triboint.2007.04.006 Semetse L, Obadele BA, Raganya L, Geringer J, Olubambi PA (2019) Fretting corrosion behaviour of Ti-6Al-4V reinforced with zirconia in foetal bovine serum. J Mech Behav Biomed Mater 100:103392. https://doi.org/10.1016/j.jmbbm.2019.103392 Corne P, De March P, Cleymand F, Geringer J (2019) Fretting-corrosion behavior on dental implant connection in human saliva. J Mech Behav Biomed Mater 94:86–92. https://doi.org/10.1016/j.jmbbm.2019.02.025 Swaminathan V, Gilbert JL (2012) Fretting corrosion of CoCrMo and Ti6Al4V interfaces. Biomaterials 33:5487–5503. https://doi.org/10.1016/j.biomaterials.2012.04.015 Royhman D, Patel M, Jacobs JJ, Wimmer MA, Hallab NJ, Mathew MT (2018) In vitro simulation of fretting-corrosion in hip implant modular junctions: The influence of pH. Med Eng Phys 52:1–9. https://doi.org/10.1016/j.medengphy.2017.10.016 Pourzal R, Lundberg HJ, Hall DJ, Jacobs JJ (2018) What factors drive taper corrosion? J Arthroplasty 33:2707–2711. https://doi.org/10.1016/j.arth.2018.03.055 Zhang G, Yang S, Huang Z, Zhang X, Zhang Y, Li J, Jin Z (2022) Decomposition of micromotion at the head-neck interface in total hip arthroplasty during walking. Comput Methods Biomech Biomed Eng 26(2023):548–558. https://doi.org/10.1080/10255842.2022.2073788 dos Santos VO, Cubillos PO, dos Santos CT, Fernandes WG, de Jesus Monteiro M, Caminha IMV, Moré ADO, de Mello Roesler CR (2022) Pre-clinical evaluation of fretting-corrosion at stem-head and stem-cement interfaces of hip implants using in vitro and in silico models. J Mater Res B Biomed. https://doi.org/10.1002/jbm.b.35110 Oladokun A, Hall RM, Neville A, Bryant MG (2019) The evolution of subsurface micro-structure and tribo-chemical processes in cocrmo-ti6al4v fretting-corrosion contacts: what lies at and below the surface? Wear 440–441:203095. https://doi.org/10.1016/j.wear.2019.203095 Vingsbo O, Söderberg S (1988) On fretting maps. Wear 126:131–147. https://doi.org/10.1016/0043-1648(88)90134-2 Bryggman U, Söderberg S (1986) Contact conditions in fretting. Wear 110:1–17. https://doi.org/10.1016/0043-1648(86)90148-1 Fouvry S, Kapsa P, Vincent L (1995) Analysis of sliding behaviour for fretting loadings: determination of transition criteria. Wear 185:35–46. https://doi.org/10.1016/0043-1648(94)06582-9 Fouvry S, Kapsa P, Vincent L (1996) Quantification of fretting damage. Wear 200:186–205. https://doi.org/10.1016/S0043-1648(96)07306-1 Berthier Y, Vincent L, Godet M (1989) Fretting fatigue and fretting wear. Tribol Int 22:235–242. https://doi.org/10.1016/0301-679X(89)90081-9 Fouvry S, Kapsa P, Zahouani H, Vincent L (1997) Wear analysis in fretting of hard coatings through a dissipated energy concept. Wear 203–204:393–403. https://doi.org/10.1016/S0043-1648(96)07436-4 Jayaraj K, Pius A (2018) Biocompatible coatings for metallic biomaterials. Fundam Biomater Met. https://doi.org/10.1016/B978-0-08-102205-4.00016-7 Kawalec JS, Brown SA, Payer JH, Merritt K (1995) Mixed-metal fretting corrosion of Ti6Al4V and wrought cobalt alloy. J Biomed Mater Res 29:867–873. https://doi.org/10.1002/jbm.820290712 Maurer AM, Brown SA, Payer JH, Merritt K, Kawalec JS (1993) Reduction of fretting corrosion of Ti-6Al-4V by various surface treatments. J Orthop Res 11:865–873. https://doi.org/10.1002/jor.1100110613 Grabarczyk J, Batory D, Kaczorowski W, Pązik B, Januszewicz B, Burnat B, Czerniak-Reczulska M, Makówka M, Niedzielski P (2020) Comparison of different thermo-chemical treatments methods of Ti-6Al-4V alloy in terms of tribological and corrosion properties. Materials 13:1–16. https://doi.org/10.3390/ma13225192 Hager CH, Sanders JH, Sharma S (2004) Characterization of mixed and gross slip fretting wear regimes in Ti6Al4V interfaces at room temperature. Wear 257:167–180. https://doi.org/10.1016/j.wear.2003.10.023 Zhou ZR, Sauger E, Liu JJ, Vincent L (1997) Nucleation and early growth of tribologically transformed structure (TTS) induced by fretting. Wear 212:50–58. https://doi.org/10.1016/S0043-1648(97)00141-5 Sauger E, Ponsonnet L, Martin JM, Vincent L (2000) Study of the tribologically transformed structure created during fretting tests. Tribol Int 33:743–750. https://doi.org/10.1016/S0301-679X(00)00088-8 Wu J, Petrov RH, Kölling S, Koenraad P, Malet L, Godet S, Sietsma J (2018) Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails. Metals. https://doi.org/10.3390/met8100749 Fayeulle S, Blanchard P, Vincent L (1993) Fretting behavior of titanium alloys. Tribol Trans 36:267–275. https://doi.org/10.1080/10402009308983158 Blanchard P, Colombie C, Pellerin V, Fayeulle S, Vincent L (1991) Material effects in fretting wear: application to iron, titanium, and aluminum alloys. Metall Trans A 22:1535–1544. https://doi.org/10.1007/BF02667367 Sauger E, Fouvry S, Ponsonnet L, Kapsa P, Martin JM, Vincent L (2000) Tribologically transformed structure in fretting. Wear 245:39–52. https://doi.org/10.1016/S0043-1648(00)00464-6 Feyzi M, Fallahnezhad K, Taylor M, Hashemi R (2022) The tribocorrosion behaviour of Ti-6Al-4 V alloy: the role of both normal force and electrochemical potential. Tribol Lett 70:83. https://doi.org/10.1007/s11249-022-01624-0 Klekotka M, Dabrowski JM, Recko K (2020) Fretting and fretting corrosion processes of Ti6Al4V. Materials 13:1–17