Fracture properties of steel fibre reinforced high-volume fly ash self-compacting concrete

Okamura, 2003, Self-compacting concrete, J. Adv. Concr. Technol., 1, 5, 10.3151/jact.1.5 Goodier, 2003, Development of self-compacting concrete, Struct. Build., 156, 405, 10.1680/stbu.2003.156.4.405 Herath, 2021, Long term mechanical performance of nano-engineered high volume fly ash concrete, J. Build. Eng., 43 Anjos, 2020, Effect of high volume fly ash and metakaolin with and without hydrated lime on the properties of self-compacting concrete, J. Build. Eng., 27 Jain, 2022, Effect of granite industry waste addition on durability properties of fly ash blended self-compacting concrete, Constr. Build. Mater., 340, 10.1016/j.conbuildmat.2022.127727 Singh, 2019, Reviewing the behaviour of high volume fly ash based self compacting concrete, J. Build. Eng., 26 Faraj, 2021, Rheological behavior and fresh properties of self-compacting high strength concrete containing recycled PP particles with fly ash and silica fume blended, J. Build. Eng., 34 de Matos, 2020, Effectiveness of fly ash in reducing the hydration heat release of mass concrete, J. Build. Eng., 28 Dinakar, 2008, Durability properties of high volume fly ash self-compacting concretes, Cem. Concr. Compos., 30, 880, 10.1016/j.cemconcomp.2008.06.011 Esquinas, 2018, Durability of self-compacting concrete made from non-conforming fly ash from coal-fired power plants, Constr. Build. Mater., 189, 993, 10.1016/j.conbuildmat.2018.09.056 Xie, 2002, Optimum mix parameters of high-strength self-compacting concrete with ultrapulverized fly ash, Cem. Concr. Res., 32, 477, 10.1016/S0008-8846(01)00708-6 Ramkumar, 2020, A Review on Performance of Self-Compacting Concrete – Use of Mineral Admixtures and Steel Fibres with Artificial Neural Network Application, Constr. Build. Mater., 261, 10.1016/j.conbuildmat.2020.120215 Monteiro, 2018, On the mechanical behavior of polypropylene, steel and hybrid fiber reinforced self-consolidating concrete, Constr. Build. Mater., 188, 280, 10.1016/j.conbuildmat.2018.08.103 Mahakavi, 2019, Impact resistance, microstructures and digital image processing on self-compacting concrete with hooked end and crimped steel fiber, Constr. Build. Mater., 220, 651, 10.1016/j.conbuildmat.2019.06.001 Alberti, 2015, Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concrete, Constr. Build. Mater., 85, 182, 10.1016/j.conbuildmat.2015.03.007 Liu, 2019, Properties of self-compacting lightweight concrete reinforced with steel and polypropylene fibers, Constr. Build. Mater., 226, 388, 10.1016/j.conbuildmat.2019.07.306 Khaloo, 2014, Mechanical performance of self-compacting concrete reinforced with steel fibers, Constr. Build. Mater., 51, 179, 10.1016/j.conbuildmat.2013.10.054 Athiyamaan, 2020, Experimental, statistical and simulation analysis on impact of micro steel - Fibres in reinforced SCC containing admixtures, Construct, Build. Mater., 246, 10.1016/j.conbuildmat.2020.118450 Silva, 2019, Effect of incorporation of masonry residue on the properties of self-compacting concretes, Constr. Build. Mater., 196, 277, 10.1016/j.conbuildmat.2018.11.132 Shilang Xu, 2014, Development of concrete fracture mechanics in China during the past three decades, J. Hydraul. Eng., 45, 1 Deeb, 2012, Development of self-compacting high and ultra high performance concretes with and without steel fibres, Cem. Concr. Compos., 34, 185, 10.1016/j.cemconcomp.2011.11.001 Leemann, 2010, Influence of cement type on ITZ porosity and chloride resistance of self-compacting concrete, Cem. Concr. Compos, 32, 116, 10.1016/j.cemconcomp.2009.11.007 Karamloo, 2020, Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete, Constr. Build. Mater., 250, 10.1016/j.conbuildmat.2020.118856 Ríos, 2020, Microstructural analyses of the addition of PP fibres on the fracture properties of high-strength self-compacting concrete by X-ray computed tomography, Constr. Build. Mater., 261, 10.1016/j.conbuildmat.2020.120499 Xargay, 2018, Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete, Constr. Build. Mater., 187, 519, 10.1016/j.conbuildmat.2018.07.156 Magbool, 2021, The effect of various steel fibers and volcanic pumice powder on fracture characteristics of Self-Compacting concrete, Constr. Build. Mater., 312, 10.1016/j.conbuildmat.2021.125444 Mezzal, 2021, Effect of discarded steel fibers on impact resistance, flexural toughness and fracture energy of high-strength self-compacting concrete exposed to elevated temperatures, Fire Saf. J., 121, 10.1016/j.firesaf.2020.103271 Sanjeev, 2020, Study on the effect of steel and glass fibers on fresh and hardened properties of vibrated concrete and self-compacting concrete, Mater. Today.: Proc., 27, 1559 Ghasemi, 2019, Studying the fracture parameters and size effect of steel fiber-reinforced self-compacting concrete, Construct. Build. Mater., 201, 447, 10.1016/j.conbuildmat.2018.12.172 ASTM, 2011, E647-11, Standard Test Method for Measurement of Fatigue Crack Growth Rates[S] Gao, 2007, Fracture characteristics of steel fiber reinforced high strength concrete under three-point bending, J. Chin. Ceram. Soc., 12, 1630 Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem. Concr. Res, 6, 773, 10.1016/0008-8846(76)90007-7 Wang, 2020, Experimental Study on the Fracture Parameters of Concrete, Materials, 14, 129, 10.3390/ma14010129 Ghasemi, 2018, Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters, Constr. Build. Mater., 162, 674, 10.1016/j.conbuildmat.2017.11.141 Shen, 2022, Experimental investigation on the high-volume fly ash ecological self-compacting concrete, J. Build. Eng., 60 Saif, 2021, Effect of discarded steel fibers on impact resistance, flexural toughness and fracture energy of high-strength self-compacting concrete exposed to elevated temperatures, Fire Saf. J., 121 Şahin, 2011, The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete, Constr. Build. Mater., 25, 1801, 10.1016/j.conbuildmat.2010.11.084 Sivakumar, 2007, Mechanical properties of high-strength concrete reinforced with metallic and non-metallic fibers, Cem. Concr. Compos., 29, 603, 10.1016/j.cemconcomp.2007.03.006 Son, 2020, Effects of the strain rate and fiber blending ratio on the tensile behavior of hooked steel fiber and polyvinyl alcohol fiber hybrid reinforced cementitious composites, Cem. Concr. Compos., 106, 10.1016/j.cemconcomp.2019.103482 Xargay, 2018, Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete, Constr. Build. Mater., 187, 519, 10.1016/j.conbuildmat.2018.07.156 Li, 1996, Toughening in cement based composites. Part II: Fiber reinforced cementitious composites, Cem. Concr. Compos., 18, 239, 10.1016/0958-9465(95)00029-1 Zhang, 2014, Microstructure of high volume fly ash concrete at long age, J. Chin. Electron Microsc. Soc., 33, 516 Zuo, 2021, Research on Type evolution of calcium silicate hydrate in ultra-high performance concrete[D], Beijing Jiaotong Univ. Sun, 1985, Studies on bond strength of interface between fiber and matrix in steel fiber reinforced concrete, J. Chin. Ceram. Soc., 03, 292 Wang, 2007, Fracture and bond performance of fiber reinforced and rehabilitated concrete[D], Zhengzhou Univ. Chan, 2004, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cem. Concr. Res., 34, 1167, 10.1016/j.cemconres.2003.12.023 Wu, 2017, Effect of nano-Si02 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete, Cem. Concr. Res., 95, 247, 10.1016/j.cemconres.2017.02.031