Formulation of three lubrication problems in terms of complementarity

Rohde, 1975, A unified treatment of thick and thin elastohydrodynamic problems by using higher order element methods, 343, 315 Prati, 1984, A study of the elastohydrodynamic problem in rectangular elastomeric seals, J. Tribol., 106, 505, 10.1115/1.3260972 Alliney, 1984, Extended variational formulations and F.E. models for nonlinear beams under nonconservative loading, Comput. Methods Appl. Mech. Eng., 46, 177, 10.1016/0045-7825(84)90060-4 Alliney, 1985, ‘Extended’ variational formulations and finite element models for the elastohydrodynamic lubrication problem, 129 Cannarozzi, 1980, On the resolution of some unilaterally constrained problems in structural engineering, Comput. Methods Appl. Mech. Eng., 24, 339, 10.1016/0045-7825(80)90069-9 Oh, 1984, The numerical solution of dynamically loaded elastohydrodynamic contact as a nonlinear complementarity problem, J. Tribol., 106, 88, 10.1115/1.3260872 Kostreva, 1984, Elasto-hydrodynamic lubrication: a nonlinear complementarity problem, Int. J. Numer. Methods Fluids, 4, 377, 10.1002/fld.1650040407 Rohde, 1981, A mixed friction model for dynamically loaded contacts with application to piston ring lubrication, 262 Kawahara, 1981, Oil film formation of oil seals for reciprocating motion, C2/73 Jacobson, 1984, Non-newtonian fluid model incorporated into elastohydrodynamic lubrication of rectangular contacts, J. Tribol., 106, 275, 10.1115/1.3260901 Strozzi, 1984, Theoretical analysis of a segmented locking ring for shell-bottom connection in pressure vessels, J. Strain Anal., 19, 153, 10.1243/03093247V193153 Strozzi, 1984, Analisi strutturale di un dispositivo di arresto del fondo di un recipiente in pressione in presenza di contatto recessivo, 325 Liu, 1984, Contact stresses in locking rings of pipeline closures — aniterative finite-element approach, Comput. Struct., 19, 467, 10.1016/0045-7949(84)90053-1 Cottle, 1976, Complementarity and variational problems, Istituto nazionale di alta matematica, XIX, 177 Jagger, 1966, Further studies of the lubrication of synthetic rubber rotary shaft seals, 181, 191 Scheck, 1981, Rotary shaft seals at large dynamic eccentricities, 103 1981 Leeuwestein, 1982 Field, 1975, A theoretical study of the elastohydrodynamic lubrication of reciprocating rubber seals, ASLE Trans., 18, 48, 10.1080/05698197508982746 Christensen, 1969, Stochastic models for hydrodynamic lubrication of rough surfaces, 184, 1013 Christensen, 1971, Some aspects of the functional influence of surface roughness in lubrication, Wear, 17, 149, 10.1016/0043-1648(71)90025-1 Christensen, 1972, A theory of mixed lubrication, 186, 421 Phan-Thien, 1982, On the mean Reynolds equation in the presence of homogeneous random surface roughness, J. Appl. Mech., 49, 476, 10.1115/1.3162484 Patir, 1978, An average flow model for determining effects of three dimensional roughness on partial hydrodynamic lubrication, J. Lubr. Technol., 100, 12, 10.1115/1.3453103 Blok, 1963, Inverse problems in hydrodynamic lubrication and design directives for lubricated flexible surfaces, 1 Strozzi, 1984, On the elastohydrodynamic lubrication in soft seals, Wear, 97, 107, 10.1016/0043-1648(84)90085-1 Strozzi, 1984, Formulation of the mixed lubrication problem for elastomeric reciprocating seals in terms of complementarity, III/157 Milne, 1980 Malik, 1984, On slip flow considerations in gas-lubricated porous bearings, J. Tribol., 106, 484, 10.1115/1.3260969 Tevaarwerk, 1976, The shear of elastohydrodynamic oil films Chattopadhyay, 1984, Dynamic characteristics of finite porous bearings considering tangential velocity slip, J. Tribol., 106, 534, 10.1115/1.3260977 Theyse, 1967, The inverse hydrodynamic theory and its application in the design of controlled leakage seals between moving parts, F2/17 Johannesson, 1983, Oil leakage and friction forces of reciprocating O-ring seals considering cavitation, J. Lubr. Technol., 105, 288, 10.1115/1.3254595 1978