Forming the transverse inner rib of a curved generatrix part through power spinning

Hongrui Zhang1, Mei Zhan1, Jing Guo1, Xianxian Wang1, Pengfei Gao2, Fei Ma3
1State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, People's Republic of China
2Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an, 710072, People’s Republic of China
3Long March Machinery Factory, China Aerospace Science and Technology Corporation, Chengdu, 610100, People’s Republic of China

Tóm tắt

Từ khóa


Tài liệu tham khảo

Zhan M, Guo J, Fu MW et al (2018) Formability limits and process window based on fracture analysis of 5A02-O aluminium alloy in splitting spinning. J Mater Process Technol 257:15–32

Music O, Allwood JM, Kawai K (2010) A review of the mechanics of metal spinning. J Mater Process Technol 210(1):3–23

Zhan M, Chu Q, Shi F et al (2014) Forming law of flexible hot spinning of TA15 titanium alloy. J Netshape Form Eng 6(5):31–36

Wong CC, Dean TA, Lin J (2003) A review of spinning, shear forming and flow forming process. Int J Mach Tool Manuf 43(14):1419–1435

Bai Q, He Y, Zhan M (2008) Finite element modeling of power spinning of thin-walled shell with hoop inner rib. Trans Nonferrous Met Soc China 18:6–13

Ma F, Yang H, Zhan M (2007) Research on distribution of stress and strain field in power spinning process of parts with transverse rib. In: The fifth international conference on physical and numerical simulation of materials processing (ICPNS 2007), Zhengzhou, China, vol 6, pp 866–868

Ma F, Yang H, Zhan M (2007) Research on the blank selection in the power spinning process of parts with transverse inner rib. Mater Forum Sci 561–565:885–888

Ma F, Yang H, Zhan M (2010) Plastic deformation behaviors and their application in power spinning process of conical parts with transverse inner rib. J Mater Process Technol 210(1):180–189

Jiang SY, Ren ZY, Xue KM et al (2008) Application of BPANN for prediction of backward ball spinning of thin-walled tubular part with longitudinal inner ribs. J Mater Process Technol 196(1–3):190–196

Wang Z, Ma S (2016) Analysis of thin-walled shells with inner ribs formed by inner spinning technology. Mater Res Innov 19(s5):101–105

Liang W, Cao ZP, Li XG et al (2016) The study on spin forming technology of tube shaped parts with circumferential reinforcements. J Changchun Univ Sci Technol (Nat Sci Edn) 39(5):85–87

Zhan M, Li H, Yang H et al (2008) Wall thickness variation during multi-pass spinning of large complicated shell. J Plast Eng 15(2):115–121

Chen G, Zhan M, Yang H et al (2008) FEA of power spinning of complicated thin-walled shell based on orthogonal optimization. J Plast Eng 15(4):67–71

Luo W, Chen F, Xu B et al (2018) Study on compound spinning technology of large thin-walled parts with ring inner ribs and curvilinear generatrix. Int J Adv Manuf Technol 98(5–8):1199–1216

Gu CG (2010) Research on inhomogeneous deformation during spinning of curvilinear generatrix thin-walled shell with transverse inner rib. Dissertation, Northwestern Polytechnical University