Forced convective heat transfer by swirling impinging jets issuing from nozzles equipped with twisted tapes

Tummers, 2011, Turbulent flow in the near field of a round impinging jet, International Journal of Heat and Mass Transfer, 54, 4939, 10.1016/j.ijheatmasstransfer.2011.07.007

Yakkatelli, 2010, A visualization study of the flow dynamics of a single round impinging jet on porous media, Experimental Thermal and Fluid Science, 34, 1008, 10.1016/j.expthermflusci.2010.03.004

Kanokjaruvijit, 2012, Heat transfer correlations of perpendicularly impinging jet on a hemispherical-dimpled surface, International Journal of Heat and Mass Transfer, 53, 3045, 10.1016/j.ijheatmasstransfer.2010.03.023

Sagot, 2010, Enhancement of jet-to-wall heat transfer using axisymmetric grooved impinging plates, International Journal Thermal Science, 49, 1026, 10.1016/j.ijthermalsci.2009.12.011

Liu, 2011, Flow field investigation in a trapezoidal duct with swirl flow induced by impingement jets, Chinese Journal of Aeronautics, 24, 8, 10.1016/S1000-9361(11)60002-2

Zhao, 2009, Thermal performance of a premixed impinging circular flame jet array with induced-swirl, Applied Thermal Engineering, 29, 159, 10.1016/j.applthermaleng.2008.02.016

Murugesan, 2009, Heat transfer and pressure drop characteristics of turbulent flow in a tube fitted with trapezoidal-cut twisted tape insert, International Journal of Academic Research, 1, 123

Eiamsa-ard, 2010, Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes, Experimental Thermal and Fluid Science, 34, 53, 10.1016/j.expthermflusci.2009.09.002

Eiamsa-ard, 2010, Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows, Experimental Thermal and Fluid Science, 34, 711, 10.1016/j.expthermflusci.2009.12.013

Seemawute, 2010, Thermohydraulics of turbulent flow through a round tube by a peripherally-cut twisted tape with an alternate axis, International Communications in Heat and Mass Transfer, 37, 652, 10.1016/j.icheatmasstransfer.2010.03.005

Eiamsa-ard, 2010, Heat transfer enhancement in a tube using delta-winglet twisted tape inserts, Applied Thermal Engineering, 30, 310, 10.1016/j.applthermaleng.2009.09.006

Eiamsa-ard, 2010, Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts, International Journal of Heat and Mass Transfer, 53, 1364, 10.1016/j.ijheatmasstransfer.2009.12.023

Eiamsa-ard, 2010, Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes, Experimental Thermal and Fluid Science, 34, 1151, 10.1016/j.expthermflusci.2010.04.004

Eiamsa-ard, 2010, Thermal characteristics in round tube fitted with serrated twisted tape, Applied Thermal Engineering, 30, 1673, 10.1016/j.applthermaleng.2010.03.026

Wen, 2003, An impingement cooling on a flat surface by using circular jet with longitudinal swirling strips, International Journal of Heat and Mass Transfer, 46, 4657, 10.1016/S0017-9310(03)00302-8

Choo, 2010, Heat transfer characteristics of impinging air jets under a fixed pumping power condition, International Journal of Heat and Mass Transfer, 53, 320, 10.1016/j.ijheatmasstransfer.2009.09.027

Huang, 1998, Heat transfer and flow visualization experiments of swirling, multi-channel, and conventional impinging jet, International Journal of Heat and Mass Transfer, 41, 583, 10.1016/S0017-9310(97)00123-3