Forced Convection in High Porosity Metal Foams
Tóm tắt
This paper reports an experimental and numerical study of forced convection in high porosity (ε∼0.89–0.97) metal foams. Experiments have been conducted with aluminum metal foams in a variety of porosities and pore densities using air as the fluid medium. Nusselt number data has been obtained as a function of the pore Reynolds number. In the numerical study, a semi-empirical volume-averaged form of the governing equations is used. The velocity profile is obtained by adapting an exact solution to the momentum equation. The energy transport is modeled without invoking the assumption of local thermal equilibrium. Models for the thermal dispersion conductivity, kd, and the interstitial heat transfer coefficient, hsf, are postulated based on physical arguments. The empirical constants in these models are determined by matching the numerical results with the experimental data obtained in this study as well as those in the open literature. Excellent agreement is achieved in the entire range of the parameters studied, indicating that the proposed treatment is sufficient to model forced convection in metal foams for most practical applications. [S0022-1481(00)01903-4]
Từ khóa
Tài liệu tham khảo
Hunt, M. L., and Tien, C. L., 1988, “Effects of Thermal Dispersion on Forced Convection in Fibrous Media,” Int. J. Heat Mass Transf., 31, pp. 301–309.
Sathe, S. B., Peck, R. E., and Tong, T. W., 1990, “A Numerical Analysis of Heat Transfer and Combustion in Porous Radiant Burners,” Int. J. Heat Mass Transf., 33, No. 6, pp. 1331–1338.
Lee, Y. C., Zhang, W., Xie, H., and Mahajan, R. L., 1993, “Cooling of a FCHIP Package With 100 W, 1 cm2 Chip,” Proceedings of the 1993 ASME Int. Elec. Packaging Conf., Vol. 1, ASME, New York, pp. 419–423.
Calmidi, V. V., and Mahajan, R. L., 1999, “The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams,” ASME J. Heat Transfer, 121, pp. 466–471.
Bhattacharya, A., Calmidi, V. V., and Mahajan, R. L., 1999, “An Analytical-Experimental Study for the Determination of the Effective Thermal Conductivity of High-Porosity Fibrous Foams,” ASME IMECE ’99, ASME, New York, pp. 13–20.
Koch, D. L., and Brady, J. F., 1986, “The Effective Diffusivity of Fibrous Media,” AIChE J., 32, pp. 575–591.
Hsu, C. T., and Cheng, P., 1990, “Thermal Dispersion in Porous Media,” Int. J. Heat Mass Transf., 33, No. 8, pp. 1587–1597.
Adnani, P., Catton, I., and Abdou, M. A., 1995, “Non-Darcian Forced Convection in Porous Media With Anisotropic Dispersion,” ASME J. Heat Transfer, 117, pp. 447–451.
Calmidi, V. V., 1998, “Transport Phenomena in High Porosity Metal Foams,” Ph.D. thesis, University of Colorado, Boulder, CO.
Beavers, G. S., and Sparrow, E. M., 1969, “Non-Darcy Flow Through Fibrous Porous Media,” ASME J. Appl. Mech., 36, pp. 711–714.
Vafai, K., and Tien, C. L., 1981, “Boundary and Inertial Effects on Flow and Heat Transfer in Porous Media,” Int. J. Heat Mass Transf., 24, pp. 195–203.
DuPlessis, P., Montillet, A., Comiti, J., and Legrand, J., 1994, “Pressure Drop Prediction for Flow Through High Porosity Metallic Foams,” Chem. Eng. Sci., 49, pp. 3545–3553.
Carbonell, R. G., and Whitaker, S., 1984, “Heat and Mass Transfer in Porous Media,” Fundamentals of Transport Phenomena in Porous Media, Bear and Corapcioglu, eds., Martinus Nijhoff, Dordrecht, The Netherlands, pp. 121–198.
Kaviany, M., 1994, Convective Heat Transfer, Springer-Verlag, New York.
Zanotti, F., and Carbonell, R. G., 1984, “Development of Transport Equations for Multiphase System-III,” Chem. Eng. Sci., 39, pp. 299–311.
Wakao, N., Kaguei, S., and Funazkri, T., 1979, “Effect of Fluid Dispersion Coefficients on Particle-to-Fluid Heat Transfer Co-efficients in Packed Beds,” Chem. Eng. Sci., 34, pp. 325–336.
Hwang, G. J., and Chao, C. H., 1994, “Heat Transfer Measurements and Analysis for Sintered Porous Channels,” ASME J. Heat Transfer, 117, pp. 725–732.
Cheng, P., and Vortmeyer, D., 1988, “Transverse Thermal Dispersion and Wall Channelling in a Packed Bed With Forced Convective Flow,” Int. J. Heat Mass Transf., 43, No. 9, pp. 2523–2532.
Koch, D. L. , 1996, “Hydrodynamic Diffusion Near Solid Boundaries With Applications to Heat and Mass Transport Into Sheared Suspensions and Fixed-Fibre Beds,” J. Fluid Mech., 318, pp. 31–47.
Zukauskas, A. A., 1987, “Convective Heat Transfer in Cross-Flow,” Handbook of Single-Phase Heat Transfer, Kakac, S., et al., eds. Wiley, New York.
Incropera, F. P., and DeWitt, D., 1997, Fundamentals of Heat and Mass Transfer, Wiley, New York.
Vafai, K., and Kim, S. J., 1989, “Forced Convection in a Channel Filled with a Porous Medium: An Exact Solution,” ASME J. Heat Transfer, 111, pp. 1103–1106.
Roache, P. J., 1982, Computational Fluid Dynamics, Hermosa, Albuquerque, NM.
Yokoyama, Y., and Mahajan, R. L., 1995, “Non-Darcian Convective Heat Transfer in a Horizontal Duct,” Proceedings of the National Heat Transfer Conference, Vol. 7, ASME, New York, pp. 83–92.