Bê tông geopolymer nhẹ dựa trên tro bay sử dụng công nghệ tác nhân tạo bọt

Applied Mechanics and Materials - Tập 679 - Trang 20-24
Mohd Mustafa Al Bakri Abdullah1, Zarina Yahya1, Muhammad Faheem Mohd Tahir1, Hussin Kamarudin1, Raja Rizwan Hussain2, Andrei Victor Sandu3
1Universiti Malaysia Perlis (UniMAP)
2King Abdulaziz City Science and Technology
3"Gheorghe Asachi" Technical University of Iaşi

Tóm tắt

Bài báo này trình bày các tính chất cơ học của bê tông geopolymer nhẹ được tổng hợp thông qua quá trình kích hoạt kiềm từ nguồn tro bay (FA) được sản xuất bằng cách trộn một hỗn hợp geopolymer với bọt khí được tạo ra bởi việc sử dụng NCT Foam Generator. Hai điều kiện bảo dưỡng được sử dụng là bảo dưỡng ở nhiệt độ phòng và bảo dưỡng trong lò với nhiệt độ không đổi là 60 oC. Khối lượng riêng cho thấy bê tông geopolymer nhẹ dựa trên tro bay có khối lượng nhẹ với khối lượng riêng từ 1225 kg/m3 đến 1667 kg/m3 với cường độ nén chấp nhận được là 17.60 MPa cho khối lượng riêng 1667 kg/m3.

Từ khóa


Tài liệu tham khảo

N. Narayanan and K. Ramamurthy: ACI Materials Journal Vol. 97 (2000), pp.367-373.

Cement and Concrete Institute, Foamed Concrete: Cement and Concrete Institute, (2010) Midrand, South Africa.

E.P. Kearsley and P.J. Wainwright: Cement Concrete Research 31 (2001), p.105–112.

L. de Rose and J. Morris: The Influence of Mix Design on the Properties of Microcellular Concrete. In Specialist Techniques and Materials for Construction; R.K. Dhir, N.A. Handerson, Eds.; Thomas Telford: London, UK, (1999), p.185–197.

M. Turner: Fast Set Foamed Concrete for Same Day Reinstatement of Openings in Highways. In Proceedings of One Day Seminar on Foamed Concrete: Properties, Applications and Latest Technological Developments; Loughborough University: Leicestershire, UK, (2001).

M. R. Jones and A. McCarthy: Fuel Vol. 84 (2005), p.1398–1409.

C. Pickford and S. Crompton: Concrete (1996), p.14–15.

E.P. Kearsley: The Use of Foamed Concrete for Affordable Development in Third World Countries. In Appropriate Concrete Technology; Dhir, R.K., McCarthy, M.J., Eds.; E & FN Spon: London, UK, (1996), p.233–243.

M. Nehdi, Y. Djebbar and A. Khan: ACI Materials Journal Vol. 98 (2001), p.402–409.

F.C. McCormick: ACI Material Journal Vol. 64 (1967), p.104–109.

ACI Committee 523, Guide for cellular concretes above 50 pcf, and for aggregate concretes above 50 pcf with compressive strengths less than 2500 psi, ACI J 72, (1975), p.50–66.

ASTM C 796-97: Standard test method for foaming agents for use in producing cellular concrete using preformed foam, Philadelphia, (1997).

E.P. Kearsley and H.F. Mostert: Designing mix composition of foamed concrete with high fly ash contents. In: R.K. Dhir, M.D. Newlands, A. McCarthy, editors. Use of foamed concrete in construction. London: Thomas Telford (2005), p.29–36.

K. Ramamurthy and E.K. Kunhanandan Nambiar and G. Indu Siva Ranjani: Cem. Concr. Compos. Vol. 31 (2009), p.388–396.

D. Hardjito and B.V. Rangan. Development and Properties of Low-calcium Fly ash-based geopolymer concrete. Research report GC1. Faculty of Engineering Curtin University of Technology, Perth, Australia, (2005).

BS 1881-122, Testing concrete - Method for determination of water absorption, British Standards Institution, (1983).