Flow field design with 3D geometry for proton exchange membrane fuel cells

Wee, 2007, Applications of proton exchange membrane fuel cell systems, Renew. Sustain. Energy Rev., 11, 1720, 10.1016/j.rser.2006.01.005

Hussain, 2007, A preliminary life cycle assessment of PEM fuel cell powered automobiles, Appl. Therm. Eng., 27, 2294, 10.1016/j.applthermaleng.2007.01.015

Wen, 2008, Application of a thermally conductive pyrolytic graphite sheet to thermal management of a PEM fuel cell, J. Power Sources, 178, 132, 10.1016/j.jpowsour.2007.12.040

Curtin, 2004, Advanced materials for improved PEMFC performance and life, J. Power Sources, 131, 41, 10.1016/j.jpowsour.2004.01.023

Liu, 2016, A review of high-temperature polymer electrolyte membrane fuel-cell (HT-PEMFC)-based auxiliary power units for diesel-powered road vehicles, J. Power Sources, 311, 91, 10.1016/j.jpowsour.2016.02.033

Kandlikar, 2009, Thermal management issues in a PEMFC stack – a brief review of current status, Appl. Therm. Eng., 29, 1276, 10.1016/j.applthermaleng.2008.05.009

Wen, 2009, Experimental study of clamping effects on the performances of a single proton exchange membrane fuel cell and a 10-cell stack, J. Power Sources, 192, 475, 10.1016/j.jpowsour.2009.03.058

Martins, 2009, The experimental validation of a simplified PEMFC simulation model for design and optimization purposes, Appl. Therm. Eng., 29, 3036, 10.1016/j.applthermaleng.2009.04.002

Yan, 2017, Transport of highly concentrated fuel in direct methanol fuel cells, Appl. Therm. Eng., 126, 290, 10.1016/j.applthermaleng.2017.07.186

Das, 2017, Recent advances and challenges of fuel cell based power system architectures and control – a review, Renew. Sustain. Energy Rev., 73, 10, 10.1016/j.rser.2017.01.148

Tian, 2018, Icosahedral Pt–Ni nanocrystalline electrocatalyst: growth mechanism and oxygen reduction activity, ChemSusChem, 11, 1015, 10.1002/cssc.201800074

Chung, 2017, Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst, Science, 357, 479, 10.1126/science.aan2255

Neergat, 2012, Unsupported Cu-Pt core-shell nanoparticles: oxygen reduction reaction (ORR) catalyst with better activity and reduced precious metal content, J. Electrochem. Soc., 159, F234, 10.1149/2.039207jes

Luo, 2017, Composition-graded PdxNi1–x nanospheres with Pt monolayer shells as high-performance electrocatalysts for oxygen reduction reaction, ACS Catal., 7, 5420, 10.1021/acscatal.7b01775

Rao, 2010, Carbon supported Pd-Co-Mo alloy as an alternative to Pt for oxygen reduction in direct ethanol fuel cells, Electrochim. Acta., 55, 3002, 10.1016/j.electacta.2009.12.094

Sun, 2013, A class of high performance metal-free oxygen reduction electrocatalysts based on cheap carbon blacks, Sci. Rep., 3, 1, 10.1038/srep02505

Shao, 2016, Recent advances in electrocatalysts for oxygen reduction reaction, Chem. Rev., 116, 3594, 10.1021/acs.chemrev.5b00462

Shen, 2018, DMF-coordination assisted electrodeposition of highly active PtCo alloy catalysts for the oxygen reduction reaction, J. Electrochem. Soc., 165, D43, 10.1149/2.0471802jes

Manso, 2012, Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review, Int. J. Hydrogen Energy, 37, 15256, 10.1016/j.ijhydene.2012.07.076

Li, 2005, Review of bipolar plates in PEM fuel cells: flow-field designs, Int. J. Hydrogen Energy, 30, 359, 10.1016/j.ijhydene.2004.09.019

Wang, 2007, Novel serpentine-baffle flow field design for proton exchange membrane fuel cells, J. Power Sources, 173, 210, 10.1016/j.jpowsour.2007.08.037

Wang, 2017, Effect of height/width-tapered flow fields on the cell performance of polymer electrolyte membrane fuel cells, Int. J. Hydrogen Energy, 42, 23107, 10.1016/j.ijhydene.2017.07.136

Friess, 2012, Development of a novel radial cathode flow field for PEMFC, Int. J. Hydrogen Energy, 37, 7719, 10.1016/j.ijhydene.2012.02.012

Tang, 2010, Feasibility study of porous copper fiber sintered felt: a novel porous flow field in proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 35, 9661, 10.1016/j.ijhydene.2010.06.101

Roshandel, 2012, Simulation of an innovative flow-field design based on a bio inspired pattern for PEM fuel cells, Renew. Energy., 41, 86, 10.1016/j.renene.2011.10.008

Tüber, 2004, Investigation of fractal flow-fields in portable proton exchange membrane and direct methanol fuel cells, J. Power Sources, 131, 175, 10.1016/j.jpowsour.2003.11.078

Yoshida, 2015, Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society, Electrochem. Soc. Interface, 24, 45, 10.1149/2.F03152if

Heidary, 2016, Influences of bipolar plate channel blockages on PEM fuel cell performances, Energy Convers. Manage., 124, 51, 10.1016/j.enconman.2016.06.043

Perng, 2015, A three-dimensional numerical investigation of trapezoid baffles effect on non-isothermal reactant transport and cell net power in a PEMFC, Appl. Energy, 143, 81, 10.1016/j.apenergy.2014.12.059

Ghanbarian, 2016, Enhancement of PEM fuel cell performance by flow channel indentation, Energy Convers. Manage., 110, 356, 10.1016/j.enconman.2015.12.036

Kim, 2017, Modeling two-phase flow in three-dimensional complex flow-fields of proton exchange membrane fuel cells, J. Power Sources, 365, 419, 10.1016/j.jpowsour.2017.09.003

Yuan, 2010, Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance, Renew. Energy, 35, 656, 10.1016/j.renene.2009.08.017

Falcão, 2011, 1D and 3D numerical simulations in PEM fuel cells, Int. J. Hydrogen Energy, 36, 12486, 10.1016/j.ijhydene.2011.06.133

Springer, 1991, Polymer electrolyte fuel cell model, J. Electrochem. Soc., 138, 2334, 10.1149/1.2085971

Heusy, 2016, Use of computational fluid dynamic to compare the pressure loss between a parallel flow field plate with a parallel-baffle flow field plate and a fractal parallel-baffle flow field plate in a proton exchange membrane fuel cell, Procedia Eng., 157, 436, 10.1016/j.proeng.2016.08.345