Flow Laws in Metal Foams: Compressibility and Pore Size Effects

Ashby M.F. and Evans A.G. et al. (2000). Metal Foams: A Design Guide. Butterworth – Heinemann, Boston, MA

Banhart J. (2001). Manufacture, Characterization and application of cellular metals and metal foams. Prog. Mater. Sci. 46: 559–632

Bhattacharya A. and Calmidi V. et al. (2002). Thermophysical properties of high porosity metal foams. Int. J. Heat Mass Transfer 45(5): 1017–1031

Boomsma K. and Poulikakos D. (2001). On the effective thermal conductivity of a threedimensionally structured fluid-saturated metal foam. Int. J. Heat Mass Transfer 44: 827–836

Calmidi, V.V.: Transport phenomena in high porosity metal foam. Boulder, CO, University of Colorado. Ph. D. thesis (1998)

Calmidi V.V. and Mahajan R.L. (2000). Forced convection in high porosity metal foams. J. Heat Transf. 122: 557–565

Catillon, S., Louis, C. et al.: Influence of cellular structure in catalytic reactors for H2 production: Application to improvement of methanol steam reformer by the addition of a copper foam. J. Hydrogen Energy sous presse (2005)

Chauveteau, G.: Essai sur la loi de Darcy. Université de Toulouse, Ph.D. thesis (1965)

Darcy H.P.G. (1856). Exposition et application des principes à suivre et des formules à employer dans les questions de distribution d’eau. Les fontaines publiques de la ville de Dijon. Victor Delmont, Paris

Despois J.-F. and Mortensen A. (2005). Permeability of open-pore microcellular materials. Acta Materialia 53: 1381–1388

Du Plessis P. and Montillet A. et al. (1994). Pressure Drop Prediction for Flow through High Porosity Metallic Foams. Chem. Eng. Sci. 49: 3545–3553

Dukhan N. (2006). Correlations for the pressure drop for flow through metal foam.. Exp. Fluids 41(4): 665–672

Dukhan P.-F.R. and Alvarez-Hernandez A.R. (2006). Air flow through compressed and uncompressed aluminum foam: Measurements and correlations. J. Fluids Eng. Trans. ASME 128(5): 1004–1012

Dullien, F.A.L.: Porous Media. Fluid Transport and Pore Structure, Academic Press (1992)

Ergun S. (1952). Fluid flow through packed columns. Chem. Eng. Prog 48: 89–94

Firdaous M. and Guermond J.L. et al. (1997). Nonlinear corrections to Darcy’s law at low Reynolds numbers. J. Fluid Mech. 343: 331–50

Fourar M. and Lenormand R. et al. (2005). Inertia effects in high-rate flow through heterogeneous porous media. Trans. Porous Media 60: 353–370

Fourar M. and Radilla G. et al. (2004). On the non-linear behavior of a laminar single-phase flow through two and three-dimensional porous media. Adv. Water Res. 27: 669–677

Fourie J.G. and Du Plessis J.P. (2002). Pressure drop modelling in cellular metallic foams. Chemical Engineering Science 57(14): 2781–2789

Hernández, Á. R. Á.: Combined flow and heat transfer characterization of open cell aluminum foams, University of puerto rico. Master Sci. 93 (2005)

Hunt M.L. and Tien C.L. (1988). Effects of thermal dispersion on forced convection in fibrous media. Int. J. Heat Mass Transfer 31: 301–309

JIMIC-4: METFOAM2005, Kyoto, Japan (2005)

Kaviany, M.: Principles of Heat Transfer in Porous Media. Springer-Verlag (1992)

Khayargoli P. and Loya V. et al. (2004). The impact of microstructure on the permeability of metal foams. CSME 2004 Forum, Ontario, London

Langlois S. and Coeuret F. (1989). Flow-through and flow-by porous electrodes of nickel foam. I. Material characterisation. J. Appl. Electrochem. 19: 43–50

Liu J.F. and Wu W.T. et al. (2006). Measurement and correlation of friction characteristic of flow through foam matrixes. Exp. Thermal Fluid Sci. 30(4): 329–336

Madani, B., Topin, et al. F.: Flow laws in metallic foams: experimental determination of inertial and viscous contribution. J. Porous Media 10(1) (2006)

Mei C. and Auriault J.L. (1993). The effect of weak inertia on flow through a porous medium. J. Fluid Mech. 222: 647–663

Moreira E.A. and Innocentini M.D.M. et al. (2004). Permeability of ceramic foams to compressible and incompressible flow. J. Eur. Ceramic Soc. 24: 3209–3218

Phanikumar M.S. and Mahajan R.L. (2002). Non-Darcy natural convection in high porosity metal foams. Int. J. Heat Mass Transfer 45: 3781–3793

Renard P. and Genty A. et al. (2001). Laboratory détermination of the full permeability tensor. J. Geophys. Res. 106(B11): 26443–26452

Richardson J.T. and Peng Y. et al. (2000). Properties of ceramic foam catalyst supports: pressure drop. Appl. Catal. A: General 204: 19–32

Schatan, B.: Développement d’échangeur à haute température type IHX-Concept à base de mousses métalliques. france, école polytechnique universitaire de Marseille. Département Mécanique-Energétique 68 (2006)

Tadrist L. and Miscevic M. et al. (2004). About the Use of Fibrous Materials in Compact Heat Exchangers. Exp. Thermal Fluid Sci. 28: 193–199

Vicente, J., Daurelle, J.V., et al.: Structural properties measurement: A Morphological tool for transport properties determination 4th International Conference on Porous Metals and Metal Foaming Technology, Kyoto, Japan (2005)

Vicente J. and Topin F. et al. (2006). Open celled material structural properties measurement: from morphology to transport properties. Mater. Trans 47(9): 2195–2202

Wallis G. (1969). One-Dimensional Two-Phase Flow. Mc graw Hill, New-York, NY

Whitaker S. (1986). Flow in porous media I: a théoritical dérivation of Darcy’s law. Trans. Porous Media 1(1): 3–25

Whitaker, S.: The Forchheimer Equation: A Theoretical Development. Transport in Porous Media 25(27–61) (1996)

Wodie J.C. and Levy T. (1991). Correction non linéaire de la loi de Darcy. C. R. Acad. Sci. 312(II): 157–161

Zhao, C.Y., et al.: Thermal Transport Phenomena in Porvair. Metal Foams and Sintered Beds, in Technical report. Micromechanics Centre & Whittle Lab, Department of Engineering, University of Cambridge, Cambridge (2001)