Flexible inorganic–organic hybrids with dual inorganic components

Fu, 2013, Toward strong and tough glass and ceramic scaffolds for bone repair, Adv. Funct. Mater., 23, 5461, 10.1002/adfm.201301121 Che, 2019, A 3D printable and bioactive hydrogel scaffold to treat traumatic brain injury, Adv. Funct. Mater., 29, 1904450, 10.1002/adfm.201904450 Baino, 2018, Bioactive sol-gel glasses: processing, properties, and applications, Int. J. Appl. Ceram. Technol., 15, 841, 10.1111/ijac.12873 Jones, 2013, Review of bioactive glass: from Hench to hybrids, Acta Biomater., 9, 4457, 10.1016/j.actbio.2012.08.023 Owens, 2016, Sol–gel based materials for biomedical applications, Prog. Mater. Sci., 77, 1, 10.1016/j.pmatsci.2015.12.001 Sun, 2012, Highly stretchable and tough hydrogels, Nature, 489, 133, 10.1038/nature11409 Novak, 1993, Hybrid nanocomposite materials? Between inorganic glasses and organic polymers, Adv. Mater., 5, 422, 10.1002/adma.19930050603 Vueva, 2018, Silica/alginate hybrid biomaterials and assessment of their covalent coupling, Appl. Mater. Today, 11, 1 Mahony, 2010, Silica-gelatin hybrids with tailorable degradation and mechanical properties for tissue regeneration, Adv. Funct. Mater., 20, 3835, 10.1002/adfm.201000838 Kumar, 2017, Synthesis of mechanically stiff and bioactive hybrid hydrogels for bone tissue engineering applications, Chem. Eng. J., 317, 119, 10.1016/j.cej.2017.02.065 Chung, 2016, Tailoring mechanical properties of sol–gel hybrids for bone regeneration through polymer structure, Chem. Mater., 28, 6127, 10.1021/acs.chemmater.6b01941 Connell, 2017, Functionalizing natural polymers with alkoxysilane coupling agents: reacting 3-glycidoxypropyl trimethoxysilane with poly(γ-glutamic acid) and gelatin, Polym. Chem., 8, 1095, 10.1039/C6PY01425A Valliant, 2013, Bioactivity in silica/poly(gamma-glutamic acid) sol-gel hybrids through calcium chelation, Acta Biomater., 9, 7662, 10.1016/j.actbio.2013.04.037 Hench, 2010, Twenty-first century challenges for biomaterials, J. R. Soc. Interface, 7, S379, 10.1098/rsif.2010.0151.focus Wegst, 2015, Bioinspired structural materials, Nat. Mater., 14, 23, 10.1038/nmat4089 Connell, 2014, Chemical characterisation and fabrication of chitosan-silica hybrid scaffolds with 3-glycidoxypropyl trimethoxysilane, J. Mater. Chem. B, 2, 668, 10.1039/C3TB21507E Fan, 2021, J. Mater. Chem. B, 9, 4400, 10.1039/D1TB00555C Tallia, 2018, Bouncing and 3D printable hybrids with self-healing properties, Mater. Horiz, 5, 849, 10.1039/C8MH00027A Gabrielli, 2014, Exploring GPTMS reactivity against simple nucleophiles: chemistry beyond hybrid materials fabrication, RSC Adv., 4, 1841, 10.1039/C3RA44748K Shi, 2015, Highly stretchable and super tough nanocomposite physical hydrogels facilitated by the coupling of intermolecular hydrogen bonds and analogous chemical crosslinking of inorganic particles, J. Mater. Chem. B, 3, 1187, 10.1039/C4TB01654H Zhang, 2016, Phase transition temperature controllable poly(acrylamide-co-acrylic acid) nanocomposite physical hydrogels with high strength, Chin. J. Polym. Sci., 34, 1261, 10.1007/s10118-016-1848-7 Shi, 2016, Robust and self-healable nanocomposite physical hydrogel facilitated by the synergy of ternary crosslinking points in a single network, J. Mater. Chem. B, 4, 6221, 10.1039/C6TB01606E Zhong, 2015, Self-healable, tough and highly stretchable ionic nanocomposite physical hydrogels, Soft Matter, 11, 4235, 10.1039/C5SM00493D Wang, 2017, Effect of inorganic/organic ratio and chemical coupling on the performance of porous silica/chitosan hybrid scaffolds, Mater. Sci. Eng. C, 70, 969, 10.1016/j.msec.2016.04.010 Mokhtarifar, 2020, Heterostructured TiO2/SiO2/gamma-Fe2O3/rGO coating with highly efficient visible-light-induced self-cleaning properties for metallic artifacts, ACS Appl. Mater. Interfaces, 12, 29671, 10.1021/acsami.0c06792 Hu, 2016, Significant improvement in thermal and UV resistances of UHMWPE fabric through in situ formation of polysiloxane-TiO2 hybrid layers, ACS Appl. Mater. Interfaces, 8, 23311, 10.1021/acsami.6b04914 Yu, 2004, Structure of calcium silicate hydrate (C-S-H): near-, mid-, and far-infrared spectroscopy, J. Am. Ceram. Soc., 82, 742, 10.1111/j.1151-2916.1999.tb01826.x Wang, 2019, Tuning morphology and mechanical property of polyacrylamide/laponite/titania dual nanocomposite hydrogels by titania, Polym. Compos., 40, E466 Hench, 1990, The sol-gel process, Chem. Rev., 90, 33, 10.1021/cr00099a003 Zhang, 2013, Semiconductor nanoparticle-based hydrogels prepared via self-initiated polymerization under sunlight, even visible light, Sci. Rep., 3, 1399, 10.1038/srep01399 Aragón, 2015, Structural and surface study of praseodymium-doped SnO2 nanoparticles prepared by the polymeric precursor method, J. Phys. Chem. C, 119, 8711, 10.1021/acs.jpcc.5b00761 Fan, 2013, ZrO2/PMMA nanocomposites: preparation and its dispersion in polymer matrix, Chin. J. Chem. Eng., 21, 113, 10.1016/S1004-9541(13)60448-6 Li, 2005, Infrared study of the interaction of charged silica particles with TiO2 particles containing adsorbed cationic and anionic polyelectrolytes, Langmuir, 21, 2585, 10.1021/la0475066 Peña-Alonso, 2006, Surface chemical and physical properties of TEOS-TBOT-PDMS hybrid materials, J. Sol Gel Sci. Technol., 38, 133, 10.1007/s10971-006-7116-6 Du, 2019, Super-tough, anti-fatigue, self-healable, anti-fogging, and UV shielding hybrid hydrogel prepared via simultaneous dual in situ sol-gel technique and radical polymerization, J. Mater. Chem. B, 7, 7162, 10.1039/C9TB01625B Sanderson, 1976 Lehmann, 2018, DLS setup for in situ measurements of photoinduced size changes of microgel-based hybrid particles, Langmuir, 34, 3597, 10.1021/acs.langmuir.7b04298 Bhattacharjee, 2016, DLS and zeta potential – what they are and what they are not?, J. Controlled Release, 235, 337, 10.1016/j.jconrel.2016.06.017 Liu, 2015, Facile fabrication of superhydrophobic surfaces on wood substrates via a one-step hydrothermal process, Appl. Surf. Sci., 330, 332, 10.1016/j.apsusc.2015.01.024 Rubio, 1998, A FT-IR study of the hydrolysis of tetraethylorthosilicate (TEOS), Spectrosc. Lett., 31, 199, 10.1080/00387019808006772 Norris, 2020, Electrospinning 3D bioactive glasses for wound healing, Biomed. Mater., 15, 10.1088/1748-605X/ab591d Chrissafis, 2011, Can nanoparticles really enhance thermal stability of polymers? Part I: an overview on thermal decomposition of addition polymers, Thermochim. Acta, 523, 1, 10.1016/j.tca.2011.06.010 Wu, 2018, Comparison of tensile and compressive properties of carbon/glass interlayer and intralayer hybrid composites, Materials, 11, 1105, 10.3390/ma11071105 Czél, 2016, Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites, Compos. A, 91, 436, 10.1016/j.compositesa.2016.07.021 Her, 2017, Dynamic mechanical analysis of carbon nanotube-reinforced nanocomposites, J. Appl. Biomater. Funct. Mater., 15, e13 Costa, 2016, Dynamic mechanical thermal analysis of polymer composites reinforced with natural fibers, Polym. Rev., 56, 362, 10.1080/15583724.2015.1108334 Chen, 2020, Analysis of dynamic mechanical properties of sprayed fiber-reinforced concrete based on the energy conversion principle, Constr. Build. Mater., 254, 119167, 10.1016/j.conbuildmat.2020.119167 Pillai, 2016, Dynamic mechanical analysis of layer-by-layer cellulose nanocomposites, Ind. Crops Prod., 93, 267, 10.1016/j.indcrop.2016.02.037 Deng, 2020, A study of tensile and compressive properties of hybrid basalt-polypropylene fiber-reinforced concrete under uniaxial loads, Struct. Concr., 22, 396, 10.1002/suco.202000006 Islam, 2012, Tropical wood polymer nanocomposite (WPNC): the impact of nanoclay on dynamic mechanical thermal properties, Compos. Sci. Technol., 72, 1995, 10.1016/j.compscitech.2012.09.003 Zhao, 2013, Degradable natural polymer hydrogels for articular cartilage tissue engineering, J. Chem. Technol. Biotechnol., 88, 327, 10.1002/jctb.3970 Setton, 1999, Altered mechanics of cartilage with osteoarthritis: human osteoarthritis and an experimental model of joint degeneration, Osteoarthr. Cartil., 7, 2, 10.1053/joca.1998.0170