Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Sự bong tróc và phân hủy của lớp phủ polyurethane sau 2 năm tiếp xúc ngoài trời tại Lhasa
Tóm tắt
Nghiên cứu này nhằm tìm hiểu sự tiếp xúc của hệ thống sơn trên máy bay polyurethane có lớp sơn giữa polyurethane và lớp sơn lót epoxy với bức xạ cực tím mạnh tại Lhasa, Tây Tạng bằng cách sử dụng các phương pháp nghiên cứu như kính hiển vi điện tử quét (SEM), kính hiển vi lực nguyên tử (AFM), phản xạ toàn phần suy giảm Fourier- biến đổi hồng ngoại (ATR-FTIR), và quang phổ điện tử tia X (XPS). Sau khi tiếp xúc, các mảnh vi đã hình thành trên bề mặt lớp sơn, và kích thước cùng số lượng các mảnh vi này tăng lên theo thời gian tiếp xúc. Độ phồng vi mô và độ nhám của lớp sơn tăng lên sau một thời gian dài tiếp xúc với ánh sáng mặt trời. Sự hình thành các mảnh vi và các bướu vi mô đã dẫn đến sự mất độ bóng của lớp sơn. Phân tích ATR-FTIR và XPS chỉ ra rằng sự đứt gãy chuỗi của nhóm C=O của polyurea và các nhóm C-O-C và CO-NH của polyurethane đã xảy ra, và các sản phẩm phân hủy của nhóm NH và nhóm carbonyl đã hình thành do sự tiếp xúc. Sự phá vỡ cấu trúc hóa học của polyurethane đã dẫn đến sự giảm đàn hồi và độ bám dính của các mảnh vi lên bề mặt của nó.
Từ khóa
#polyurethane #lớp sơn #bong tróc #phân hủy #bức xạ cực tím #Lhasa #SEM #AFM #ATR-FTIR #XPSTài liệu tham khảo
Farrier L M, Szaruga S L. Sample preparation and characterization of artificially aged aircraft coatings for microstructural analysis. Mater Charact, 2005, 55: 179–189
Shi A, Koka S, Ullett J. Performance evaluation on the weathering resistance of two USAF coating systems (standard 85285 topcoat versus fluorinated APC topcoat) via electrochemical impedance spectroscopy. Prog Org Coat, 2005, 52: 196–209
Yang X F, Vang C, Tallman D E, et al. Weathering degradation of a polyurethane coating. Polym Degrad Stab, 2001, 74: 341–351
Osterhold M, Glöckner P. Influence of weathering on physical properties of clearcoats. Prog Org Coat, 2001, 41: 177–182
Association of Automobile Industries Working Group on Test Methods for Paints. Comparison of outdoor and accelerated exposure methods. J Coat Technol Res, 1986, 58: 57–65
Tiemens H J. The performance of coil-coated materials after 5 years of outdoor exposure in the Netherlands. Construct Build Mater, 1998, 12: 19–30
Oprea S, Oprea V. Mechanical behavior during different weathering tests of the polyurethane elastomers films. Eur Polym J, 2002, 38: 1205–1210
Sanchis M R, Calvo O, Fenollar O, et al. Characterization of the surface changes and the aging effects of low-pressure nitrogen plasma treatment in a polyurethane film. Polym Test, 2008, 27: 75–83
Yang X F, Tallman D E, Bierwagen G P, et al. Blistering and degradation of polyurethane coatings under different accelerated weathering tests. Polym Degrad Stab, 2002, 77: 103–109
Kim H, Urban M W. Molecular level chain scission mechanisms of epoxy and urethane polymeric films exposed to UV/H2O. Multidimensional spectroscopic studies. Langmuir, 2000, 16: 5382–5390
Merlatti C, Perrin F X, Aragon E, et al. Natural and artificial weathering characteristics of stabilized acrylic-urethane paints. Polym Degrad Stab, 2008, 93: 896–903
Decker C, Masson F, Schwalm R. Weathering resistance of waterbased UV-cured polyurethane-acrylate coatings. Polym Degrad Stab, 2004, 83: 309–320
Kim B S, Jeong H Y, Kim B K. Surface characterizations of polyurethanes having different types of soft segment. Colloid Surf A, 2005, 268: 60–67
Mishra A K, Chattopadhyay D K, Sreedhar B, et al. FT-IR and XPS studies of polyurethane-urea-imide coatings. Prog Org Coat, 2006, 55: 231–243
Briggs D, Seah M P. Practical Surface Analysis by Auger and X-ray Photoelectron Spectroscopy. Chichester: John Wiley & Sons, 1983
Deslandes Y, Pleizier G, Alexander D, et al. XPS and SIMS characterisation of segmented polyether polyurethanes containing two different soft segments. Polymer, 1998, 39: 2361–2366