Fire resistance of biomass ash panels used for internal partitions in buildings

Vilches, 2002, Development of new fire-proof products made from coal fly ash: the CEFYR project, Journal of Chemical Technology and Biotechnology, 77, 361, 10.1002/jctb.592 Vilches, 2003, Recycling potential of coal fly ash and titanium waste as new fire-proof products, Journal of Chemical Engineering, 95, 155, 10.1016/S1385-8947(03)00099-8 Leiva, 2005, Influence of the type of ash on the fire resistance characteristics of ash-enriched mortars, Fuel, 84, 1433, 10.1016/j.fuel.2004.08.031 Vilches, 2005, Coal fly ash-containing sprayed mortar for passive fire protection of steel sections, Materiales de Construcción, 55, 25, 10.3989/mc.2005.v55.i279.196 Vilches, 2005, Insulating capacity of fly ash pastes used for passive protection against fire, Cement and Concrete Composites, 27, 776, 10.1016/j.cemconcomp.2005.03.001 EN 1363-1, Fire resistance test, Part 1: General requirements, 2000. C. Leiva, Desarrollo y especificaciones técnicas de productos ignífugos fabricados a partir de residuos industriales, para su uso como elemento constructivo de separación, Doctoral Thesis, University of Seville, Spain, 2006. EN 993-15, Test methods for dense shaped refractory products, Part 15: Determination of thermal conductivity by hot-wire (parallel) method. Bénichou, 2005, Thermal properties of light-weight-framed construction components at elevated temperatures, Fire and Materials, 29, 165, 10.1002/fam.880 Jin, 2000, Fire resistance test for fire protection materials with high water content, International Journal of Heat and Mass Transfer, 43, 4395, 10.1016/S0017-9310(00)00076-4 ASTM E 761-86, Compressive strength of the fire-resistive material applied to structural member, 2005. ASTM C 348-02, Standard test method for flexural strength and modulus of hydraulic cement mortars, 2002. EN 102031, Gypsum building plasters. Physical and mechanical test methods, 1999. EN 102035, Gypsum plasterboard. Test methods, 1998. EN 12859, Gypsum blocks. Definitions, requirements and test methods, 2001. Demirboga, 2003, Thermal conductivity and compressive strength of expanded perlite aggregate concrete with mineral admixtures, Energy and Buildings, 35, 1155, 10.1016/j.enbuild.2003.09.002 Thomas, 2002, Thermal properties of gypsum plasterboard at high temperatures, Fire and Materials, 26, 37, 10.1002/fam.786 Vilches, 2007, Fire resistance characteristics of plates containing a high biomass-ash proportion, Industrial Engineering Chemical Research, 46, 4824, 10.1021/ie061194f