Finite fracture mechanics: A coupled stress and energy failure criterion

Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem Concr Res, 6, 773, 10.1016/0008-8846(76)90007-7

Carpinteri, 1981, Static and energetic fracture parameters for rocks and concretes, Mater Struct (RILEM), 14, 151

Blom, 1986, Short fatigue crack growth behaviour in Al2024 and Al7475, 36

Kinloch, 1983, Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies, Polymer, 24, 1341, 10.1016/0032-3861(83)90070-8

Hazenberg, 2006, Mechanisms of short crack growth at constant stress in bone, J Biomech, 27, 2114

Taylor, 2005, The fracture mechanics of finite crack extension, Engng Fract Mech, 72, 1021, 10.1016/j.engfracmech.2004.07.001

Neuber, 1958

Novozhilov, 1969, On a necessary and sufficient condition for brittle strength, Prik Mat Mek, 33, 212

Sih, 1991

Seweryn, 1998, A non-local stress and strain energy release rate mixed mode fracture initiation and propagation criteria, Engng Fract Mech, 59, 737, 10.1016/S0013-7944(97)00175-6

Taylor, 2004, The effect of stress concentrations on the fracture strength of polymethylmethacrylate, Mater Sci Engng A, 382, 288, 10.1016/j.msea.2004.05.012

Carpinteri, 2005, Fracture instability and limit strength conditions in structures with re-entrant corners, Engng Fract Mech, 72, 1254, 10.1016/j.engfracmech.2004.09.008

Taylor, 1999, Geometrical effects in fatigue: a unifying theoretical model, Int J Fatigue, 21, 413, 10.1016/S0142-1123(99)00007-9

Whitney, 1974, Stress fracture criteria for laminated composites containing stress concentrations, J Compos Mater, 8, 253, 10.1177/002199837400800303

Pugno, 2004, Quantized fracture mechanics, Philos Mag A, 2829, 10.1080/14786430412331280382

Hashin, 1996, Finite thermoelastic fracture criterion with application to laminate cracking analysis, J Mech Phys Solids, 44, 1129, 10.1016/0022-5096(95)00080-1

Kim, 2000, Fracture mechanics analysis of coating/substrate systems. Part I: Analysis of tensile and bending experiments, Engng Fract Mech, 65, 573, 10.1016/S0013-7944(99)00141-1

Irwin, 1957, Analysis of stresses and strains near the end of a crack traversing a plate, J Appl Mech, 24, 361, 10.1115/1.4011547

Karihaloo, 1995

Bažant, 2002

Taylor, 2004, Predicting the fracture strength of ceramic materials using the theory of critical distances, Engng Fract Mech, 71, 2407, 10.1016/j.engfracmech.2004.01.002

Leguillon, 2002, Strength or toughness? A criterion for crack onset at a notch, Europ J Mech A/Solids, 21, 61, 10.1016/S0997-7538(01)01184-6

Leguillon, 2003, Crack onset at a v-notch. Influence of the notch tip radius, Int J Fract, 122, 1, 10.1023/B:FRAC.0000005372.68959.1d

Carpinteri, 1989, Decrease of apparent tensile and bending strength with specimen size: two different explanations based on fracture mechanics, Int J Solids Struct, 25, 407, 10.1016/0020-7683(89)90056-5

Carpinteri, 1995, Size effects on nominal tensile strength of concrete structures: multifractality of material ligaments and dimensional transition from order to disorder, Mater Struct (RILEM), 28, 311, 10.1007/BF02473145

Bažant, 1984, Size effect in blunt fracture: concrete, rock, metal, ASCE J Engrg Mech, 110, 518, 10.1061/(ASCE)0733-9399(1984)110:4(518)

Karihaloo, 2003, Size effect in concrete beams, Engng Fract Mech, 70, 979, 10.1016/S0013-7944(02)00161-3

Carpinteri, 2003, Cohesive crack model description of ductile to brittle size-scale transition: dimensional analysis vs. renormalization group theory, Engng Fract Mech, 70, 1809, 10.1016/S0013-7944(03)00126-7