Finite element modeling of rivet fastened rectangular hollow flange channel beams subject to local buckling

Schafer, 2011, Cold-formed steel structures around the world, Steel Constr, 4, 141, 10.1002/stco.201110019 Hancock, 2003, Cold-formed steel structures, J Constr Steel Res, 59, 473, 10.1016/S0143-974X(02)00103-7 Hancock, 2016, Cold-formed steel structures: research review 2013–2014, Adv Struct Eng, 19, 393, 10.1177/1369433216630145 Magnucka-Blandzi, 2011, Effective shaping of cold-formed thin-walled channel beams with double-box flanges in pure bending, Thin-Wall Struct, 49, 121, 10.1016/j.tws.2010.08.013 Paczos, 2013, Experimental and numerical (FSM) investigations of thin-walled beams with double-fox flanges, J Theor Appl Mech, 51, 497 Paczos, 2014, Experimental investigation of C-beams with non-standard flanges, J Constr Steel Res, 93, 77, 10.1016/j.jcsr.2013.09.009 Magnucki, 2009, Theoretical shape optimization of cold-formed thin-walled channel beams with drop flanges in pure bending, J Constr Steel Res, 65, 1731, 10.1016/j.jcsr.2009.03.010 Magnucki, 2010, Elastic buckling of cold-formed thin-walled channel beams with drop flanges, J Struct Eng, 136, 886, 10.1061/(ASCE)ST.1943-541X.0000184 Magnucka-Blandzi, 2012, Buckling study of thin-walled channel beams with double-box flanges in pure bending, Strain, 48, 317, 10.1111/j.1475-1305.2011.00825.x Sudhir Sastry, 2015, Parametric studies on buckling of thin walled channel beams, Comput Mater Sci, 96, 416, 10.1016/j.commatsci.2014.07.058 OneSteel Australian Tube Mills, (OATM). Design of LiteSteel Beams. Brisbane, Australia; 2008. Anapayan, 2012, Improved design rules for hollow flange sections subject to lateral distortional buckling, Thin-Wall Struct, 50, 128, 10.1016/j.tws.2011.09.004 Anapayan, 2012, Numerical modelling and design of LiteSteel Beams subject to lateral buckling, J Constr Steel Res, 70, 51, 10.1016/j.jcsr.2011.08.016 Anapayan, 2011, Section moment capacity tests of LiteSteel beams, Thin-Wall Struct, 49, 502, 10.1016/j.tws.2010.12.004 Keerthan, 2014, Experimental studies of hollow flange channel beams subject to combined bending and shear actions, Thin-Wall Struct, 77, 129, 10.1016/j.tws.2013.12.003 Keerthan, 2010, Elastic shear buckling characteristics of LiteSteel beams, J Constr Steel Res, 66, 1309, 10.1016/j.jcsr.2010.05.005 Keerthan, 2010, Experimental studies on the shear behaviour and strength of LiteSteel beams, Eng Struct, 32, 3235, 10.1016/j.engstruct.2010.06.012 Keerthan, 2011, New design rules for the shear strength of LiteSteel beams, J Constr Steel Res, 67, 1050, 10.1016/j.jcsr.2010.11.010 Keerthan, 2014, Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions, Eng Struct, 75, 197, 10.1016/j.engstruct.2014.05.022 Keerthan, 2014, Experimental study of web crippling behaviour of hollow flange channel beams under two flange load cases, Thin-Wall Struct, 85, 207, 10.1016/j.tws.2014.08.011 Mahendran, 2013, Experimental studies of the shear behavior and strength of LiteSteel beams with stiffened web openings, Eng Struct, 49, 840, 10.1016/j.engstruct.2012.12.007 Seo, 2011, Plastic bending behaviour and section moment capacities of mono-symmetric LiteSteel beams with web openings, Thin-Wall Struct, 49, 513, 10.1016/j.tws.2010.12.003 Seo, 2012, Member moment capacities of mono-symmetric LiteSteel Beam floor joists with web openings, J Constr Steel Res, 70, 153, 10.1016/j.jcsr.2011.07.008 Keerthan, 2008, Shear behaviour of LiteSteel beams, 411 Anapayan, 2011, Lateral distortional buckling tests of a new hollow flange channel beam, Thin-Wall Struct, 49, 13, 10.1016/j.tws.2010.08.003 Siahaan, 2016, Section moment capacity tests of rivet fastened rectangular hollow flange channel beams, J Constr Steel Res, 125, 252, 10.1016/j.jcsr.2016.06.021 Keerthan, 2011, Numerical modeling of LiteSteel beams subject to shear, J Struct Eng, 137, 1428, 10.1061/(ASCE)ST.1943-541X.0000391 Anapayan, 2010 Schafer, 2010, Computational modeling of cold-formed steel, Thin-Wall Struct, 48, 752, 10.1016/j.tws.2010.04.008 Pham, 2010, Numerical simulation of high strength cold-formed purlins in combined bending and shear, J Constr Steel Res, 66, 1205, 10.1016/j.jcsr.2010.04.014 Standards Australia. Australia/New Zealand Standard AS/NZS 4600 cold-formed steel structures. Sydney, Australia; 2005. Standards Australia. Australian Standard AS 4100 steel structures. Sydney, Australia; 1998. AISI, 2012