Finite element based large eddy simulation of flow over bluff bodies

Hayashida, 1990, Aerodynamic shape effects of tall building for vortex induced vibration, J Wind Eng Ind Aerodyn, 33, 237, 10.1016/0167-6105(90)90039-F Hikami, 1988, Rain-wind induced vibrations of cables stayed bridges, J Wind Eng Ind Aerodyn, 29, 409, 10.1016/0167-6105(88)90179-1 Ehsan, 1990, Vortex-induced vibrations of flexible bridges, J Eng Mech, 116, 1392, 10.1061/(ASCE)0733-9399(1990)116:6(1392) Matsumoto, 1992, Rain-wind induced vibration of cables of cable-stayed bridges, J Wind Eng Ind Aerodyn, 43, 2011, 10.1016/0167-6105(92)90628-N Sanderse, 2011, Review of computational fluid dynamics for wind turbine wake aerodynamics, Wind Energy, 14, 799, 10.1002/we.458 Kwok, 1988, Effect of building shape on wind-induced response of tall building, J Wind Eng Ind Aerodyn, 28, 381, 10.1016/0167-6105(88)90134-1 Kawai, 1998, Effect of corner modifications on aeroelastic instabilities of tall buildings, J Wind Eng Ind Aerodyn, 74, 719, 10.1016/S0167-6105(98)00065-8 Tamura, 1999, The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes, J Wind Eng Ind Aerodyn, 83, 135, 10.1016/S0167-6105(99)00067-7 Tanaka, 2012, Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurations, J Wind Eng Ind Aerodyn, 107, 179, 10.1016/j.jweia.2012.04.014 Bearman, 1998, Reduction of bluff-body drag and suppression of vortex shedding by the introduction of wavy separation lines, J Fluids Struct, 12, 123, 10.1006/jfls.1997.0128 Owen, 2001, Passive control of VIV with drag reduction, J Fluids Struct, 15, 597, 10.1006/jfls.2000.0358 Lam, 2004, Three-dimensional nature of vortices in the near wake of a wavy cylinder, J Fluids Struct, 19, 815, 10.1016/j.jfluidstructs.2004.04.004 Zhang, 2005, PIV measurements of the near-wake behind a sinusoidal cylinder, Exp Fluids, 38, 824, 10.1007/s00348-005-0981-9 Lam, 2008, Large eddy simulation of flow around wavy cylinders at a subcritical Reynolds number, Int J Heat Fluid Flow, 29, 1071, 10.1016/j.ijheatfluidflow.2008.01.006 Lin, 2016, Effects of large spanwise wavelength on the wake of a sinusoidal wavy cylinder, J Fluids Struct, 61, 392, 10.1016/j.jfluidstructs.2015.12.004 Bearman, 1982, An experimental study of pressure fluctuations on fixed and oscillating square-section cylinders, J Fluid Mech, 119, 297, 10.1017/S0022112082001360 Lyn, 1994, The flapping shear layer formed by flow separation from the forward corner of a square cylinder, J Fluid Mech, 267, 353, 10.1017/S0022112094001217 Lyn, 1995, A laser-doppler velocimetry study of ensemble-averaged characteristics of the turbulent near wake of a square cylinder, J Fluid Mech, 304, 285, 10.1017/S0022112095004435 Koobus, 2004, A variational multiscale method for the large eddy simulation of compressible turbulent flows on unstructured meshes – application to vortex shedding, Comput Methods Appl Mech Eng, 193, 1367, 10.1016/j.cma.2003.12.028 Trias, 2015, Turbulent flow around a square cylinder at Reynolds number 22,000: a DNS study, Comput Fluids, 123, 87, 10.1016/j.compfluid.2015.09.013 Tran S, Sahni O. Finite Element based Large Eddy Simulation using a Combination of the Variational Multiscale Method and the Dynamic Smagorinsky Model, J Turbul, (accepted), doi:10.1080/14685248.2017.1280607. Bazilevs, 2007, Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows, Comput Methods Appl Mech Eng, 197, 173, 10.1016/j.cma.2007.07.016 Hoffman, 2006, A new approach to computational turbulence modeling, Comput Methods Appl Mech Eng, 195, 2865, 10.1016/j.cma.2004.09.015 Hoffman, 2011, Adaptive modeling of turbulent flow with residual based turbulent kinetic energy dissipation, Comput Methods Appl Mech Eng, 200, 2758, 10.1016/j.cma.2010.11.016 Trofimova, 2009, Direct numerical simulation of turbulent channel flows using a stabilized finite element method, Comput Fluids, 38, 924, 10.1016/j.compfluid.2008.10.003 Sahni, 2011, Three-dimensional interactions between a finite-span synthetic jet and a crossflow, J Fluid Mech, 671, 254, 10.1017/S0022112010005604 Wang, 2010, A mixed large eddy simulation model based on the residual-based variational multiscale formulation, Phys Fluids, 22, 075107, 10.1063/1.3453710 Hughes, 2007, Variational multiscale analysis: the fine-scale Green’s function, projection, optimization, localization, and stabilized methods, SIAM J Numer Anal, 45, 539, 10.1137/050645646 Oberai, 2005, Variational formulation of the Germano identity for the Navier–Stokes equations, J Turbul, N7, 10.1080/14685240500103192 Meneveau, 1996, A Lagrangian dynamic subgrid-scale model of turbulence, J Fluid Mech, 319, 353, 10.1017/S0022112096007379 Jansen, 1999, A generalized-α method for integrating the filtered Navier–Stokes equations with a stabilized finite element method, Comput Methods Appl Mech Eng, 190, 305 Norberg, 2003, Fluctuating lift on a circular cylinder: review and new measurements, J Fluids Struct, 17, 57, 10.1016/S0889-9746(02)00099-3 Luo, 1994, Effects of incidence and afterbody shape on flow past bluff cylinders, J Wind Eng Ind Aerodyn, 53, 375, 10.1016/0167-6105(94)90092-2 Rodi, 1997, Status of large eddy simulation: results of a workshop, J Fluids Eng, 119, 248, 10.1115/1.2819128 Voke, 1997, Flow past a square cylinder: test case LES2, 355 Sohankar, 2006, Flow over a bluff body from moderate to high Reynolds numbers using large eddy simulation, Comput Fluids, 35, 1154, 10.1016/j.compfluid.2005.05.007 Lee, 1975, The effect of turbulence on the surface pressure field of a square prism, J Fluid Mech, 69, 263, 10.1017/S0022112075001437 Minguez, 2011, Experimental and high-order LES analysis of the flow in near-wall region of a square cylinder, Int J Heat Fluid Flow, 32, 558, 10.1016/j.ijheatfluidflow.2011.03.009 Sahni, 2008, Adaptive boundary layer meshing for viscous flow simulations, Eng Comput, 24, 267, 10.1007/s00366-008-0095-0 Rodriguez, 2013, A parallel adaptive mesh method for the numerical simulation of multiphase flow, Comput Fluids, 87, 115, 10.1016/j.compfluid.2013.04.004 Sahni, 2016, Parallel anisotropic mesh adaptation with boundary layers for automated viscous flow simulations, Eng Comput Sahni, 2010, Curved boundary layer meshing for adaptive viscous flow simulations, Finite Elem Anal Des, 46, 132, 10.1016/j.finel.2009.06.016 Zhang, 2016, Finite element analysis of boundary layer flows using a mixed B-spline setting on hybrid meshes, 1 Sahni, 2009, Scalable implicit finite element solver for massively parallel processing with demonstration to 160k cores, 1 Sahni, 2009, Strong scaling analysis of a parallel, unstructured, implicit solver and the influence of the operating system interference, Sci Program, 17, 261 Zhou, 2010, Cardiovascular flow simulation at extreme scale, Comput Mech, 46, 71, 10.1007/s00466-009-0450-z