Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading

Structures - Tập 34 - Trang 2876-2899 - 2021
Zhiyuan Fang1, Krishanu Roy1, Yaohui Chi2, Boshan Chen1, James B.P. Lim1
1Department of Civil and Environmental Engineering, The University of Auckland, New Zealand
2College of Harbour and Coastal Engineering, Jimei University, China

Tài liệu tham khảo

Baddoo, 2009, Designing structural stainless steel members to Eurocode 3, NEW Steel Constr, 30 American Society of Civil Engineers (ASCE), Specification for the Design of Cold-formed Stainless Steel Structural Members, SEI/ASCE 8-02, Reston, Va, 2002. Chen, 2006, Stress–strain curves for stainless steel at elevated temperatures, Eng Struct, 28, 229, 10.1016/j.engstruct.2005.07.005 T. Manninen, J.Säynäjäkangas,. (2012). Mechanical Properties of Ferritic Stainless Steels at Elevated Temperature. Stainless Steel in Structures - Fourth International Experts Seminar. (2012). Korvink, 1995, Web crippling of stainless steel cold-formed beams, J Constr Steel Res, 34, 225, 10.1016/0143-974X(94)00026-E McIntosh, 2021, Web crippling of cold-formed carbon steel, stainless steel, and aluminium channels: investigation and design, J Constr Steel Res, 179, 106538, 10.1016/j.jcsr.2021.106538 Bock, 2013, Study of web crippling in ferritic stainless steel cold formed sections, Thin-Walled Struct, 69, 29, 10.1016/j.tws.2013.03.015 Fang, 2021, Application of deep learning method in web crippling strength prediction of cold-formed stainless steel channel sections under end-two-flange loading, Struct, 33, 2903, 10.1016/j.istruc.2021.05.097 Yousefi, 2018, Web crippling behavior of unlipped cold-formed ferritic stainless steel channels subject to one-flange loadings, J Struct Eng, 144, 04018105, 10.1061/(ASCE)ST.1943-541X.0002118 Yousefi, 2019, Web crippling strength of perforated cold-formed ferritic stainless steel unlipped channels with restrained flanges under one-flange loadings, Thin-Walled Struct, 137, 94, 10.1016/j.tws.2019.01.002 Yousefi, 2017, Design of cold-formed stainless steel lipped channel sections with web openings subjected to web crippling under end-one-flange loading condition, Adv Struct Eng, 20, 1024, 10.1177/1369433216670170 Keerthan, 2014, Experimental study of web crippling behaviour of hollow flange channel beams under two flange load cases, Thin-Walled Struct, 85, 207, 10.1016/j.tws.2014.08.011 Sundararajah, 2016, Experimental studies of lipped channel beams subject to web crippling under two-flange load cases, J Struct Eng, 142, 04016058, 10.1061/(ASCE)ST.1943-541X.0001523 Gunalan, 2015, Web crippling tests of cold-formed steel channels under two flange load cases, J Constr Steel Res, 110, 1, 10.1016/j.jcsr.2015.01.018 Natário, 2014, Computational modelling of flange crushing in coldformed steel sections, Thin-Walled Struct, 84, 393, 10.1016/j.tws.2014.07.006 Chen, 2015, Experimental and finite element analysis research on coldformed steel lipped channel beams under web crippling, Thin-Walled Struct, 87, 41, 10.1016/j.tws.2014.10.017 Degtyareva, 2020, Web crippling tests of cold-formed steel channels with staggered web perforations, Thin-Walled Struct, 159, 107314, 10.1016/j.tws.2020.107314 Uzzaman, 2012, Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions—part I: tests and finite element analysis, Thin-Walled Struct, 56, 38, 10.1016/j.tws.2012.03.010 Uzzaman, 2012, Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions—Part II: parametric study and proposed design equations, Thin-Walled Struct., 56, 79, 10.1016/j.tws.2012.03.009 Uzzaman, 2013, Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition, Thin-Walled Struct., 65, 34, 10.1016/j.tws.2012.12.003 Uzzaman, 2017, Effects of edge-stiffened circular web openings on the web crippling strength of cold-formed steel channel beams under one-flange loading conditions, Eng Struct, 139, 96, 10.1016/j.engstruct.2017.02.042 Uzzaman, 2020, Cold-formed steel channel beams under end-two-flange loading condition: design for edge-stiffened holes, unstiffened holes and plain webs, Thin-Walled Struct., 147, 10.1016/j.tws.2019.106532 Uzzaman, 2020, Web crippling behaviour of cold-formed steel channel sections with edge-stiffened and unstiffened circular holes under interior-two-flange loading condition, Thin-Walled Struct., 154, 10.1016/j.tws.2020.106813 Lian, 2016, Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition – part I: tests and fnite element analysis, Thin-Walled Struct., 107, 443, 10.1016/j.tws.2016.06.025 Lian, 2016, Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - part II: parametric study and proposed design equations, Thin-Walled Struct., 107, 489, 10.1016/j.tws.2016.06.026 Chen, 2021, Web crippling capacity of fastened cold-formed steel channels with edge-stiffened web holes, un-stiffened web holes and plain webs under two-flange loading, Thin-Walled Struct, 163, 10.1016/j.tws.2021.107666 Keerthan, 2016, Experimental study on web crippling strength of hollow flange channels under end-one-flange and interior-one-flange load cases, Adv Struct Eng, 19, 966, 10.1177/1369433216630462 Australian/New Zealand Standard (AS/NZS), Cold-Formed Stainless Steel Structures, AS/NZS 4673:2001, Standards Australia, Sydney, Australia, 2001. Eurocode 3: Design of steel structures—Part 1.4 (EN 1993-1-4). General rules—Supplementary rules for stainless steels. European Committee for Standardization (CEN), Brussel; 2006. Eurocode 3: Design of steel structures—Part 1.3 (EN 1993-1-3). General rules—Supplementary rules for cold-formed members and sheeting. European Committee for Standardization (CEN), Brussel; 2006. Zhou, 2006, Cold-formed stainless steel sections subjected to web crippling, J Struct Eng, 132, 134, 10.1061/(ASCE)0733-9445(2006)132:1(134) Zhou, 2007, Cold-formed high-strength stainless steel tubular sections subjected to web crippling, J Struct Eng, 133, 368, 10.1061/(ASCE)0733-9445(2007)133:3(368) Zhou, 2008, Web crippling of cold-formed stainless steel tubular sections, Adv Struct Eng, 11, 679, 10.1260/136943308787543658 ABAQUS Analysis User's Manual-Version 6.14-2, ABAQUS Inc., USA, 2018. Roy, 2019, Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel, Thin-Walled Struct., 145, 10.1016/j.tws.2019.106393 Chen, 2020, Axial strength of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes and plain webs, J Constr Steel Res, 174, 10.1016/j.jcsr.2020.106313 Roy, 2020, Flexural capacity of gapped built-up cold-formed steel channel sections including web stiffeners, J Constr Steel Res, 172, 10.1016/j.jcsr.2020.106154 Roy, 2019, Numerical investigations on the axial capacity of back-to-back gapped built-up cold-formed stainless steel channels, Adv Struct Eng, 22, 2289, 10.1177/1369433219837390 Roy, 2019, Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression, Struct., 20, 42, 10.1016/j.istruc.2019.02.019 Chen, 2020, Parametric study and simplified design equations for cold-formed steel channels with edge-stiffened holes under axial compression, J Constr Steel Res, 172, 10.1016/j.jcsr.2020.106161 Chen, 2020, Moment capacity of cold-formed channel beams with edge-stiffened web holes, un-stiffened web holes and plain webs, Thin-Walled Struct., 157, 10.1016/j.tws.2020.107070 Ananthi, 2019, Experimental and numerical investigations on axial strength of back-to-back built-up cold-formed steel angle columns, Steel Compos Struct, 31, 601 Chen, 2021, Web crippling capacity of fastened cold-formed steel channels with edge-stiffened web holes, un-stiffened web holes and plain webs under two-flange loading, Thin-Walled Struct., 163, 10.1016/j.tws.2021.107666 Roy, 2021, Local and distortional buckling behaviour of back-to-back built-up aluminium alloy channel section columns, Thin-Walled Structures, 163 Chi YH, Roy K, Chen BS, Fang ZY, Uzzaman A, Ananthi GBG, Lim JBP, Effect of web hole spacing on axial capacity of back-to-back cold-formed steel channels with edge-stiffened holes, Steel Compos. Struct. 40(2): 287-305. Roy, 2021, Axial capacity of back-to-back built-up cold-formed stainless steel unlipped channels-numerical investigation and parametric study, Steel Compos Struct, 40, 761 Fang, 2021, Numerical simulation and proposed design rules of cold-formed stainless steel channels with web holes under interior-one-flange loading, Eng Struct Lowe, 2020, Full scale experiments on splitting behaviour of concrete slabs in steel concrete composite beams with shear stud connection, Struct, 23, 126, 10.1016/j.istruc.2019.10.008 Mathieson, 2019, Failure mechanism and bearing capacity of cold-formed steel trusses with HRC connectors, Eng Struct, 201, 10.1016/j.engstruct.2019.109741 American Iron and Steel Institute (AISI). North American Specification for the Design of Cold-formed Steel Structural Members AISI S100-16; 2016. Australia/New Zealand Standard (AS/NZS). Cold-Formed Steel Structures, AS/NZS 4600:2018. Standards Australia/ Standards New Zealand; 2018. Alsanat, 2019, Experimental study of aluminium lipped channel sections subjected to web crippling under two flange load cases, Thin-Walled Struct, 141, 460, 10.1016/j.tws.2019.01.050 Alsanat, 2019, Web crippling behaviour and design of aluminium lipped channel sections under two flange loading conditions, Thin-Walled Struct, 144, 10.1016/j.tws.2019.106265 Alsanat, 2020, Numerical investigation of web crippling in fastened aluminium lipped channel sections under two-flange loading conditions, Struct, 23, 351, 10.1016/j.istruc.2019.10.012 Alsanat, 2020, Fastened aluminum-lipped channel sections subjected to web crippling under two-flange loading conditions: experimental study, J Struct Eng, 146, 04020023, 10.1061/(ASCE)ST.1943-541X.0002550 Alsanat, 2021, Web crippling capacities of fastened aluminium lipped channel sections subjected to one-flange loading conditions, Struct, 33, 1754, 10.1016/j.istruc.2021.04.087 Alsanat, 2021, Web crippling investigations of aluminium lipped channel sections under one-flange loading conditions, Thin-Walled Struct, 166, 10.1016/j.tws.2021.108025 Janarthanan, 2019, Web crippling behaviour and design of cold-formed steel sections, Thin-Walled Struct, 140, 387, 10.1016/j.tws.2019.03.042 Janarthanan, 2019, Numerical modelling of web crippling failures in cold-formed steel unlipped channel sections, J Constr Steel Res, 158, 486, 10.1016/j.jcsr.2019.04.007 Janarthanan, 2015, Bearing capacity of cold-formed unlipped channels with restrained flanges under EOF and IOF load cases, Steel Constr., 8, 146, 10.1002/stco.201510027 Gunalan, 2019, Experimental study of unlipped channel beams subject to web crippling under one flange load cases, Adv. Steel Constr, 15, 165 Hsiao L, Yu W, Galambos TV, Load and resistance factor design of cold formed steel, calibration of the AISI design provisions, Ninth Progress Report, Civil Engineering Study 88-2, University of Missouri-Rolla, Rolla, Missouri, U.S.A., February 1988. Fang, 2021, Deep learning-based axial capacity prediction for cold-formed steel channel sections using Deep Belief Network, Struct., 33, 2792, 10.1016/j.istruc.2021.05.096 Fang, 2021, Deep learning-based procedure for structural design of cold-formed steel channel sections with edge-stiffened and un-stiffened holes under axial compression, Thin-Walled Struct., 166, 10.1016/j.tws.2021.108076