Finite difference analysis of an advance core pre-reinforcement system for Toulon's south tube

Association Française des Tunnels et de l'Espace Souterrain (AFTES), 1999 AFTES, 1999 AFTES, 2003 Aksoy, 2010, The role of umbrella arch and face bolt as deformation preventing support system in preventing building damages, Tunnelling and Underground Space Technology, 25, 553, 10.1016/j.tust.2010.03.004 Al Hallak, 1999, Experimental study of the stability of a tunnel face reinforced by bolts, 65 Anagnostou, 2015, Analysis method and design charts for bolt reinforcement of the tunnel face in cohesive-frictional soils, Tunnelling and Underground Space Technology, 47, 162, 10.1016/j.tust.2014.10.007 Attewell, 1982, Predicting the dynamics of ground settlement and its derivatives caused by tunnelling in soil, Ground Engineering, 15, 13 Benmebarek, 2000, Modélisation numérique des mouvements de terrain meuble induits par un tunnelier, Canadian Geotechnical Journal, 37, 1309, 10.1139/t00-024 Bernat, 1999, Assessing a soft soil tunnelling numerical model using field data, Géotechnique, 49, 427, 10.1680/geot.1999.49.4.427 Calvello, 1999, Centrifuge modelling of a pile reinforced tunnel heading, 313 Clough, 1981, Design and performance of excavations and tunnels in soft clay, 569 Cording, 1975, Displacement around soft ground tunnels, 571 Dias, 1997, Tunnel face reinforcement by bolting: strain approach using 3D analysis, 163 Dias, 2011, Convergence-confinement approach for designing tunnel face reinforcement by horizontal bolting, Tunnelling and Underground Space Technology, 26, 517, 10.1016/j.tust.2011.03.004 Duncan, 1970, Nonlinear analysis of stress and strain in soils, Journal of the Soil Mechanics and Foundation Division, ASCE, 96, 1629, 10.1061/JSFEAQ.0001458 Eclaircy-Caudron, 2006, Numerical modeling of a reinforcement process by umbrella arch, 165 Egger, 1999, Behavior of a tunnel head reinforced by bolting: experimental study and theoretical modeling Hejazi, 2008, Impact of constitutive models on the numerical analysis of underground constructions, Acta Geotechnica, 3, 251, 10.1007/s11440-008-0056-1 Hirata, 2013, The effects of long face bolts on face stability in the squeezing ground, 677 Hisatake, 2008, Effects of pipe roof supports and the excavation method on the displacements above a tunnel face, Tunnelling and Underground Space Technology, 23, 120, 10.1016/j.tust.2007.02.002 Itasca Consulting Group, 2009 Itasca Consulting Group, 2005 Janin, 2015, Numerical back-analysis of the southern Toulon tunnel measurements: a comparison of 3D and 2D approaches, Engineering Geology, 195, 42, 10.1016/j.enggeo.2015.04.028 Janin, 2012 Juneja, 2010, Centrifuge modelling of tunnel face reinforcement using forepoling, Tunnelling and Underground Space Technology, 25, 377, 10.1016/j.tust.2010.01.013 Kamata, 2003, Centrifuge model test of tunnel face reinforcement by bolting, Tunnelling and Underground Space Technology, 18, 205, 10.1016/S0886-7798(03)00029-4 Karakus, 2007, Appraising the methods accounting for 3D tunnelling effects in 2D plane strain FE analysis, Tunnelling and Underground Space Technology, 22, 47, 10.1016/j.tust.2006.01.004 Kim, 2005, A study on the reinforcement effect of Umbrella Arch Method and prediction of tunnel crown and surface settlement Li, 2015, Numerical parametric study on stability and deformation of tunnel face reinforced with face bolts, Tunnelling and Underground Space Technology, 47, 73, 10.1016/j.tust.2014.11.008 Lunardi, 2008 Mair, 1993, Subsurface settlement profiles above tunnels in clays, Géotechnique, 43, 315, 10.1680/geot.1993.43.2.315 Mair, 1997, Bored tunnelling in the urban environment, 2353 Melis, 2002, Prediction and analysis of subsidence induced by shield tunnelling in the Madrid Metro extension, Canadian Geotechnical Journal, 39, 1273, 10.1139/t02-073 Mermet, 2005 Mestat, 1997, Finite element mesh for geotechnical structures. Advice and recommendations, Bulletin des Laboratoires des Ponts et Chaussées Migliazza, 2009, Comparison of analytical method, 3D finite element model with experimental subsidence measurements resulting from the extension of the Milan underground, Computers and Geotechnics, 36, 113, 10.1016/j.compgeo.2008.03.005 Mroueh, 2008, A simplified 3D model for tunnel construction using tunnel boring machines, Tunnelling and Underground Space Technology, 23, 38, 10.1016/j.tust.2006.11.008 New, 1994, Ground movement model validation at the Heathrow Express trial tunnel, 301 O'Reilly, 1982, Settlements above tunnels in the United Kingdom – their magnitudes and prediction, 173 Oke, 2014, Numerical analyses in the design of umbrella arch systems, Journal of Rock Mechanics and Geotechnical Engineering, 6, 546, 10.1016/j.jrmge.2014.09.005 Ollier, 1997, 323 Oreste, 2013, Face stabilization of deep tunnels using longitudinal fibreglass dowels, International Journal of Rock Mechanics & Mining Sciences, 58, 127, 10.1016/j.ijrmms.2012.07.011 Oreste, 2012, Stabilisation of the excavation face in shallow tunnels using fibreglass dowels, Rock Mechanics and Rock Engineering, 45, 499, 10.1007/s00603-012-0234-1 Oteo, 1993, Urban tunnels in hard soils, 2063 Panet, 1995, Le calcul des tunnels par la méthode convergence-confinement, Presse de l'Ecole Nationale des Ponts et Chaussées, France Panet, 1982, Analysis of convergence behind the face of a tunnel, 197 Peck, 1969, Deep excavations and tunneling in soft ground. State of the art report, 225 Perazzelli, 2013, Stress analysis of reinforced tunnel faces and comparison with the limit equilibrium method, Tunnelling and Underground Space Technology, 38, 87, 10.1016/j.tust.2013.05.008 Rowe, 1983, A method of estimating surface settlement above tunnels constructed in soft ground, Canadian Geotechnical Journal, 20, 11, 10.1139/t83-002 Sagaseta, 1987, Evaluation of surface movements above tunnels. A new approach, 445 Selby, 1988, 5, 71 Serratrice, 2002, Analyse et prévision des tassements de surface pendant le creusement du tunnel nord de la traverse souterraine de Toulon, Bulletin des Laboratoires des Ponts et Chaussées, 237, 5 Serratrice, 1999, Suivi du plot Chalucet, application à la prévision des tassements de surface, Tunnel de la traversée souterraine de Toulon, Aix-en-Provence, 31 Shin, 2008, Model testing for pipe-reinforced tunnel heading in a granular soil, Tunnelling and Underground Space Technology, 23, 241, 10.1016/j.tust.2007.04.012 Shirlaw, 1988, Ground movements and settlements caused by tunneling for Singapore Mass Rapid Transit System, 295 Song, 2013, Beam-spring structural analysis for the design of a tunnel pre-reinforcement support system, International Journal of Rock Mechanics & Mining Sciences, 59, 139, 10.1016/j.ijrmms.2012.12.017 Song, 2006, Optimization of a pre-improvement support system for large underground excavation, Tunnelling and Underground Space Technology, 21, 374, 10.1016/j.tust.2005.12.189 St. John, 1983, Rockbolts: a new numerical representation and its application in tunnel design, 13 Sugiyama, 1999, Observations of ground movements during tunnel construction by slurry shield method at the docklands light Railway Lewisham Extension–East London, Soils and Foundations, 39, 99, 10.3208/sandf.39.3_99 Trompille, 2003 Volkmann, 2006, A contribution to the design of tunnels supported by a pipe roof, 1317 Yokota, 2012, Verification of reinforcing effects of a tunnel face reinforcement method by centrifuge model tests and numerical analysis, 790 Yoo, 2002, Finite-element analysis of tunnel face reinforced by longitudinal pipes, Computers and Geotechnics, 29, 73, 10.1016/S0266-352X(01)00020-9