Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining

Arrazola, 2013, Recent advances in modelling of metal machining processes, CIRP Annals - Manufacturing Technology, 62, 695, 10.1016/j.cirp.2013.05.006 Jawahir, 2011, Surface integrity in material removal processes: Recent advances, CIRP Annals - Manufacturing Technology, 60, 603, 10.1016/j.cirp.2011.05.002 Torrano, 2011, Prediction of residual stresses in turning of inconel 718, Advanced Materials Research, 223, 421, 10.4028/www.scientific.net/AMR.223.421 Chen, 2004, Modelling the effects of flank wear land and chip formation on residual stresses, CIRP Annals - Manufacturing Technology, 53, 95, 10.1016/S0007-8506(07)60653-2 Sasahara, 2004, Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models, International Journal of Machine Tools and Manufacture, 44, 815, 10.1016/j.ijmachtools.2004.01.002 Ö zel, 2012, Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations, CIRP Annals - Manufacturing Technology, 61, 547, 10.1016/j.cirp.2012.03.100 Schulze, 2011, Modeling the process-induced modifications of the microstructure of work piece surface zones in cutting processes, Advanced Materials Research, 223, 371, 10.4028/www.scientific.net/AMR.223.371 Xie, 2005, 2D FEM estimate of tool wear in turning operation, Wear, 258, 1479, 10.1016/j.wear.2004.11.004 Filice, 2007, Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools, Wear, 242, 545, 10.1016/j.wear.2006.06.022 Attanasio, 2008, 3D finite element analysis of tool wear in machining, CIRP Annals - Manufacturing Technology, 57, 61, 10.1016/j.cirp.2008.03.123 Attanasio, 2009, Abrasive and diffusive tool wear FEM simulation, International Journal of material Forming, 2, 543, 10.1007/s12289-009-0475-z Arrazola, 2014, Correlation between tool flank wear, force signals and surface integrity when turning bars of inconel 718 in finishing conditions, International Journal of Machining and Machinability of Materials, 15, 84, 10.1504/IJMMM.2014.059193 Ö zel, 2007, Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining, International Journal of Advanced Manufacturing Technology, 35, 255, 10.1007/s00170-006-0720-2 Meyer, 2001, Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration, International Journal of Impact Engineering, 26, 509, 10.1016/S0734-743X(01)00107-5 Ducobu, 2014, Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting, International Journal of Mechanical Sciences, 81, 77, 10.1016/j.ijmecsci.2014.02.017 Calamaz, 2010, Numerical suimulation of titanium dry machining with a strain softening constitutive law, Machining Science and Technology, 14, 244, 10.1080/10910344.2010.500957 3685, I.S.I. Tool-life testing with single point turning tools 1993;A. Ducobu, F., Rivie‘re-Lorphe‘vre, E., Filippi, E. Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. International Journal of Material Forming 2014;doi:10.1007/s12289-014-1189-4.