Fine-grained Co–Cr–Mo alloy by combined use of SHS and thermomechanical treatment

Rogachev, A.S. and Mukasyan, A.S., Combustion for Material Synthesis, New York: Taylor & Francis, 2015, pp. 1–44.

Oniashvili, G.Sh., Aslamazashvili, Z.G., Zakharov, G.V., Tavadze, G.F., Chikhradze, M.N., Dzigrashvili, T.A., and Berner, A., SHS of fine-grained ceramics containing carbides, nitrides, and borides, Int. J. SHS, 2013, vol. 22, no. 4, pp. 185–188.

Sanin, V.N., Ikornikov, D.M., Andreev, D.E., and Yukhvid, V.I., Centrifugal SHS metallurgy of nickel aluminide based eutectic alloys, Russ. J. Non-Ferr. Met., 2014, vol. 55, no. 6, pp. 613–619; DOI: 10.3103/S1067821214060212

Sanin, V., Andreev, D., Ikornikov, D., and Yukhvid, V., Cast intermetallic alloys and composites based on them by combined centrifugal casting–SHS process, Open J. Met., 2013, vol. 3, pp. 12–24; DOI: 10.4236/ojmetal.2013.32A2003

Sanin, V., Andreev, D., Ikornikov, D., and Yukhvid, V., Cast intermetallic alloys by SHS under high gravity, Acta Phys. Polon. A, 2011, vol. 120, no. 2, pp. 331–335.

Alymov, M.I., Yukhvid, V.I., Andreev, D.E., and Sanin, V.N., Chemical transformations of multicomponent thermite type mixtures in combustion waves, Dokl. Phys. Chem., 2015, vol. 460, no. 1, pp. 6–9; DOI: 10.1134/S0012501615010029

Kolobov, Yu. R., Nanotechnologies for the formation of medical implants based on titanium alloys with bioactive coatings, Nanotechnol. Russ., 2009, vol. 4, no. 11–12, pp. 758–775; DOI: 10.1134/S1995078009110020

Ivanov, M.B., Penkin, A.V., Kolobov, Yu.R., Golosov, E.V., Nechayenko, D.A., and Bozhko, S.A., Hot cross helical rolling in cone-shaped rolls as a method of severe plastic deformation, Deform. Razrush. Mater., 2010, no. 9, pp. 13–18.

Petrzhik, M.I., Filonov, M.R., Pecherkin, K.A., Levashov, E.A., Olesova, V.N., and Pozdeev, A.I., Wear resistance and mechanical properties of alloys used for medical purposes, Russ. J. Non-Ferrous Met., 2005, vol. 46, no. 11, pp. 35–43.

Shi, L., Northwood, D.O., and Cao, Z., The properties of a wrought biomedical cobalt–chromium alloy, J. Mater. Sci., 1994, vol. 29, no. 5, pp. 1232–1238.

Shi, L., Northwood, D.O., and Cao, Z., Alloy design and microstructure of a biomedical Co–Cr alloy. J. Mater. Sci., 1993, vol. 28, no. 5, pp. 1312–1316.

Zhuang, L.Z. and Langer, E.W., Effects of alloy additions on the fatigue properties of cast Co–Cr–Mo alloy used for surgical implants, J. Mater. Sci., 1990, vol. 25, no. 1, pp. 683–689.

Reed, R.C., The Superalloys: Fundamentals and Applications, Cambridge (UK): Cambridge Univ. Press, 2006, pp 1–29.

Sato, J., Omori, T., Oikawa, K., Ohnuma, I., Kainuma, R., and Ishida, K., Cobalt-base high-temperature alloys, Sci., 2006, vol. 312, no. 5770, pp. 90–91; DOI: 10.1126/science.1121738

Makineni, S.K., Nithin, B., Chattopadhyay, K., A new tungsten-free γ–γ’ Co–Al–Mo–Nb-based superalloy, Scr. Mater., 2015, vol. 98, no. 3, pp. 36–39; DOI: 10.1016/j.scriptamat.2014.11.009

Wang, L., Gorr, B., Christ, H.-J., Mukherji, D., and Rösler, J., The effect of alloyed nickel on the short-term high temperature oxidation behaviour of Co-Re-Crbased alloys, Corr. Sci., 2015, vol. 93, no. 1, pp 19–26; DOI: 10.1016/j.corsci.2015.01.004

Wang, L., Gorr, B., Christ, H.-J., Mukherji, D., and Rösler, J., Optimization of Cr-content for high-temperature oxidation behavior of Co-Re-Si-base alloys, Oxid. Met., 2013, vol. 80, no. 1–2, pp. 49–59; DOI: 10.1007/s11085-013-9369-z