Fiber-size effects on the onset of fiber–matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models
Tóm tắt
Từ khóa
Tài liệu tham khảo
Babuška, 1999, Damage analysis of fiber composites part I: statistical analysis on fiber scale, Comput Meth Appl Mech Eng, 172, 27, 10.1016/S0045-7825(98)00225-4
Carpinteri A. Size effect in fracture toughness testing: a dimensional analysis approach. In: Sih G, Mirabile M, editors. International conference on analytical and experimental fracture mechanics. Roma, Italy; 1980. p. 785–797.
Carpinteri, 1982, Notch sensitivity in fracture testing of aggregative materials, Eng Fract Mech, 16, 467, 10.1016/0013-7944(82)90127-8
Carpinteri, 1989, Cusp catastrophe interpretation of fracture instability, J Mech Phys Solids, 37, 567, 10.1016/0022-5096(89)90029-X
Carpinteri, 1989, Softening and snap-back instability in cohesive solids, Int J Numer Meth Eng, 28, 1521, 10.1002/nme.1620280705
Carpinteri, 2005, Snap-back instability in micro-structured composites and its connection with superplasticity, Strength Fract Complex, 3, 61
Carpinteri, 2008, The effect of contact on the decohesion of laminated beams with multiple microcracks, Int J Solids Struct, 45, 129, 10.1016/j.ijsolstr.2007.07.012
Chawla, 1998
Cho, 2006, Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles, Compos Sci Technol, 66, 1941, 10.1016/j.compscitech.2005.12.028
Cid-Alfaro, 2010, Numerical homogenization of cracking processes in thin fibre-epoxy layers, Euro J Mech, A/Solids, 29, 119, 10.1016/j.euromechsol.2009.09.006
Cornetti, 2006, Finite fracture mechanics: a coupled stress and energy failure criterion, Eng Fract Mech, 73, 2021, 10.1016/j.engfracmech.2006.03.010
Correa, 2008, A micromechanical view of inter-fibre failure of composite materials under compression transverse to the fibres, Compos Sci Technol, 68, 2010, 10.1016/j.compscitech.2008.02.022
Correa, 2008, Numerical characterization of the fibre–matrix interface crack growth in composites under transverse compression, Eng Fract Mech, 73, 4085, 10.1016/j.engfracmech.2008.03.005
Dundurs, 1975, Properties of elastic bodies in contact, 54
Elices, 2002, The cohesive zone model: advantages, limitations and challenges, Eng Fract Mech, 69, 137, 10.1016/S0013-7944(01)00083-2
Fisher, 1981, Void nucleation in spheroidized carbon steels – 2. Model, Metal Sci, 15, 193, 10.1179/030634581790426660
Gao, 1995, A circular inclusion with imperfect interface: Eshelby’s tensor and related problems, J Appl Mech, 62, 860, 10.1115/1.2896012
Goodier, 1933, Concentration of stress around spherical and cylindrical inclusions and flaws, J Appl Mech, 55, 39, 10.1115/1.4012173
Graciani, 2005, Weak formulation of axi-symmetric frictionless contact problems with boundary elements: Application to interface cracks, Computers and Structures, 83, 836, 10.1016/j.compstruc.2004.09.011
Han, 2006, Progression of failure in fiber-reinforced materials, Comput Mater Contin, 4, 163
Hebel, 2010, Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach, Eng Fract Mech, 77, 3558, 10.1016/j.engfracmech.2010.07.005
Kushch, 2010, Elastic interaction of partially debonded circular inclusions. i. Theoretical solution, Int J Solids Struct, 47, 1961, 10.1016/j.ijsolstr.2010.03.034
Kushch, 2011, Elastic interaction of partially debonded circular inclusions. ii. Application to fibrous composite, Int J Solids Struct, 48, 2413, 10.1016/j.ijsolstr.2011.04.017
Leguillon, 2002, Strength or toughness? a criterion for crack onset at a notch, Euro J Mech, A/Solids, 21, 61, 10.1016/S0997-7538(01)01184-6
Leidner, 1974, Strength of polymeric composites containing spherical fillers, J Appl Poly Sci, 18, 1639, 10.1002/app.1974.070180606
Levy, 1991, The debonding of elastic inclusions and inhomogeneities, J Mech Phys Solids, 39, 477, 10.1016/0022-5096(91)90037-O
Maligno, 2009, Effects of inter-fibre spacing on damage evolution in unidirectional (ud) fibre-reinforced composites, Euro J Mech, A/Solids, 28, 768, 10.1016/j.euromechsol.2008.10.009
Mantič, 2009, Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion, Int J Solids Struct, 46, 1287, 10.1016/j.ijsolstr.2008.10.036
Mantič, 2012, Crack onset at the fibre–matrix interface under a remote transverse biaxial load. Application of a coupled energy and stress criterion, Int J Solids Struct, 49, 2273, 10.1016/j.ijsolstr.2012.04.023
Mantič V, Távara L, Blázquez A, Graciani E, París F. Application of a linear elastic - brittle interface model to the crack initiation and propagation at fibre-matrix interface under biaxial transverse loads, arXiv:1311.4596.
Needleman, 1987, Continuum model for void nucleation by inclusion debonding, ASME Trans J Appl Mech, 54, 525, 10.1115/1.3173064
Ngu, 2010, On the constitutive relation of materials with microstructure using a potential-based cohesive model for interface traction, Eng Fract Mech, 77, 1153, 10.1016/j.engfracmech.2010.01.007
Ogihara, 2010, Investigation of combined stress state failure criterion for glass fiber/epoxy interface by the cruciform specimen method, Compos Sci Technol, 70, 143, 10.1016/j.compscitech.2009.10.002
Paggi, 2006, A unified interface constitutive law for the study of fracture and contact problems in heterogeneous materials, vol. 27, 297
Paggi, 2011, A nonlocal cohesive zone model for finite thickness interfaces – part I: mathematical formulation and validation with molecular dynamics, Comput Mater Sci, 50, 1625, 10.1016/j.commatsci.2010.12.024
Paggi, 2012, Stiffness and strength of hierarchical polycrystalline materials with imperfect interfaces, J Mech Phys Solids, 60, 557, 10.1016/j.jmps.2012.01.009
París, 1996, Fiber–matrix interface crack – a numerical analysis using boundary elements, Int J Fract, 82, 11, 10.1007/BF00017861
París, 2003, Micromechanical view of failure of the matrix in fibrous composite materials, Compos Sci Technol, 63, 1041, 10.1016/S0266-3538(03)00017-4
París, 2007, Kinking of transversal interface cracks between fiber and matrix, ASME Trans J Appl Mech, 74, 703, 10.1115/1.2711220
Schellekens, 1993, On the numerical integration of interface elements, Int J Numer Meth Eng, 36, 44, 10.1002/nme.1620360104
Távara, 2011, BEM analysis of crack onset and propagation along fiber–matrix interface under transverse tension using a linear elastic–brittle interface model, Eng Anal Bound Elem, 35, 207, 10.1016/j.enganabound.2010.08.006
Taylor, 2007
Toya, 1974, A crack along the interface of a rigid circular inclusion embedded in an elastic solid, Int J Fract, 9, 463, 10.1007/BF00036326
Tvergaard, 1990, Effect of fiber debonding in a whisker-reinforced metal, Mater Sci Eng A, 107, 23
Varna, 1997, The effect of crack-face contact on fiber/matrix debonding in transverse tensile loading, Compos Sci Technol, 57, 523, 10.1016/S0266-3538(96)00175-3
Wang, 2008, Uniform stresses inside an elliptical inhomogeneity with an imperfect interface in plane elasticity, ASME Trans J Appl Mech, 75, 0545011, 10.1115/1.2913045
Wriggers, 2002
Xie, 2007, Defect propagation at a circular interface, Int J Fract, 144, 1, 10.1007/s10704-007-9071-8
Yang, 1991, Fracture mechanisms of fiber-reinforced titanium alloy matrix composites part I: interfacial behavior, Mater Sci Eng A, 138, 155, 10.1016/0921-5093(91)90685-G
Zahid, 1998, Cavitation behaviour of a 2124AL/SiC composite during high strain rate superplasticity, Superplasticity and superplastic forming, 227
Zavarise, 2005, A formulation for electrostatic-mechanical contact and its numerical solution, Int J Numer Meth Eng, 64, 382, 10.1002/nme.1371
Zhang, 1997, Transverse single-fibre test for interfacial debonding in composites: 1. Experimental observations, Compos Part A: Appl Sci Manuf, 28, 309, 10.1016/S1359-835X(96)00123-6